Introduction
Maladaptive Impulsive Behavior, which can be defined as a “predisposition toward rapid unplanned reactions to internal or external stimuli without regard to the negative consequences of these reactions to themselves or others” (Moeller et al., 2001, p. 1784). Maladaptive expression of impulsivity is often observed in psychiatric disorders such as attention-deficit/hyperactivity disorder (Malloy-Diniz et al., 2007; Dang et al., 2014) antisocial personality disorder (Swann et al., 2009), borderline personality disorder (Cackowski et al., 2014), affective disorders (Peters et al., 2015), and substance abuse and addiction (Gray and MacKillop, 2015). Since most studies of impulsivity are rather focusing on its undesirable, dysfunctional consequences (Malloy-Diniz et al., 2007; Lage et al., 2013; Lin and Zhang, 2015; Nederkoorn et al., 2015). Thus, the instruments designed to measure impulsivity are biased toward its negative outcomes. The well-known Barratt Impulsiveness Scale (BIS) (Patton et al., 1995) and the Behavioral Inhibition System/Behavioral Activation System (BIS/BAS) (Carver and White, 1994) are examples of the focus only on the dysfunctional consequences of impulsivity.
Using a broader impulsivity concept that would be defined as a predisposition to quickly, non-planned reactions despite their consequences (Moeller et al., 2001). Assuming that impulsivity is a complex trait and most likely does not represent a unitary construct (Dalley et al., 2011), and that as many psychological traits, impulsivity is not only related to dysfunctional outcomes and may explain individual differences in optimal human functioning as well (Pluess and Belsky, 2013). Dickman (1990) suggests that impulsivity can have functional outcomes for simple and well-structured tasks, for example, where rapid responses are advantageous despite errors (Dickman, 1985). The tendency to act rapidly and with relatively little forethought can be useful in a context where time is very restricted to one’s decision or movement (Dickman and Meyer, 1988; Lage et al., 2012). Impulsivity can be functional, for example, in open skills sports such as soccer, basketball, and handball. In these sports, due to the constant changes in the environment, players are forced to inhibit pre-planned responses, anticipate actions and coordinate body segments based on the complex and dynamic flow of sensory information (Lage et al., 2011) with little time available (Raab, 2012). However, despite the concept of functional impulsivity being used in the sports and motor control fields (Lage et al., 2011, 2012), and that the concept of impulsiveness is broader than the concept of maladaptive impulsive behavior, no study so far used a specific measure of functional impulsivity to test the role of impulsivity in optimal human functioning in those areas. In the Brazilian context, this may be due to the lack of an adapted and validated an instrument to measure functional impulsivity.
The Dickman’s Impulsivity Inventory (DII) subdivides the construct impulsivity into two subtypes: dysfunctional impulsivity and functional impulsivity (Dickman, 1990). Dysfunctional Impulsivity is the tendency to make quick decisions and act with less forethought when this tendency is non-optimal or a source of difficulty. Functional Impulsivity is the tendency to make quick decisions and act with little forethought when it is optimal and beneficial. The DII is the only instrument that evaluates the functional dimension of impulsivity and has been used in several investigations (e. g., Roozen et al., 2013; Fino et al., 2014).
The DII was translated and adapted for several languages other than the original English (Guillemin et al., 1993; Widenfelt et al., 2005). The DII is currently available in Dutch (Claes et al., 2000), French (Caci et al., 2003), Spanish (Chico et al., 2003), Chinese (Gao et al., 2011), and Italian (Leone et al., 2002).
In summary, although there is no gold standard for the translation, adaptation, and validation of a measure cross-culturally, the literature agree that merely translating a scale in itself inadequate. In the present manuscript, we chose to use consolidated methods to translate, adapt and validate the DII, by factor analysis, Cronbach’s alpha, Intraclass Correlation Coefficient (ICC), and for divergent and convergent validity by BIS-11. Therefore, in this study, we aimed to translate, adapt, and validate the DII for the Brazilian context.
Discussion
This study aimed to translate, adapt, and validate the DII for the Brazilian context (Br-DII). Translation and cultural adaptation followed a rigorous process, which relied on an expert panel in the cross-cultural adaptation of psychological instruments. We found that an 18 items version rather than the original 23 items version of the DII was suitable for use in the Brazilian population. Although Br-DII has fewer items than the original version (Dickman, 1990), our results showed that the final Brazilian version demonstrates suitable model fit. Also, Cronbach’s alpha, intraclass correlation coefficient, convergent and discriminant validity confirmed the quality of our version of the scale.
In general, most of the self-report scales were developed in English-speaking countries, but cross-cultural and international collaborative studies are needed to researchers of non-English speaking countries to have access to reliable and valid instruments (Beaton et al., 2000). Nowadays, there are well-established methodological approaches for translating, adapting, and validating instruments (e.g., Beaton et al., 2000; Sperber, 2004). However, there is no clear consensus on how these approaches should be used (Maneesriwongul and Dixon, 2004). The Dickman Impulsivity Inventory (DII) was previously adapted and validated for some languages such as Spanish (Chico et al., 2003), French (Caci et al., 2003), Chinese (Gao et al., 2011), Italian (Leone et al., 2002), and Dutch (Claes et al., 2000). Notwithstanding, the translation process used were heterogeneous with some being more or less rigorous (Chico et al., 2003; e.g., Claes et al., 2000; Leone et al., 2002). However, none of them reported the use of well-defined methodological approaches to guide the translation (Claes et al., 2000; Leone et al., 2002; Caci et al., 2003; Chico et al., 2003; Gao et al., 2011). Thus, to the best of our knowledge, our study used the most rigorous approach, when compared to the other translations of the DII.
The original version of the scale proposed by Dickman (1990) was developed with answers in the dichotomous (true/false) format. Nevertheless, in the Br-DII version, we used a five-point Likert scale format (Totally disagree, Disagree, Neutral, Agree, and Totally agree). Although dichotomous scales do not allow misunderstandings, since the answers are straightforward (For example, Yes/No or True/False), the Likert scale seems to be a more sensitive measure when compared to the dichotomous format (Preston and Colman, 2000). So, in reading the question, the individual selects the most appropriate response within a range of options (Zou et al., 2010; Capik and Gozum, 2015). Also, some studies have shown that adapting scales from the dichotomous format to the Likert scale format can often improve internal consistency and validity (e.g., Preston and Colman, 2000; Capik and Gozum, 2015; Finn et al., 2015). Among the studies of adaptation of the DII, the Italian version of Leone et al. (2002) also used the Likert scale of five points.
Since the DII should measure distinct aspects of impulsivity, the dysfunctional and functional dimensions of the DII should exhibit relatively low or none correlation between them. In some DII versions, this relationship is endorsed. For example, in the Italian version a r < 0.30 was found (Leone et al., 2002); r = 0.32 in the Spanish version (Chico et al., 2003), r = 0.23 in the French version (Caci et al., 2003), r = 0.23 in the American version (Dickman, 1990), r = 0.25 in the Chinese version (Gao et al., 2011), and r = -0.02 in the Dutch version (Claes et al., 2000). A very low and non-significant association was also found in Jones and Paulhus (2011) study. In the present Brazilian study, we also observed an independence between the Functional and Dysfunctional factors with an r = -0.03.
Different statistical approaches have been used to validate instruments. In summary, EFA and CFA can be used. The previous DII’s validation studies used EFA but did not assess model fit (Claes et al., 2000; Caci et al., 2003; Chico et al., 2003; Gao et al., 2011). Model fit is obtained through several statistical tests used to determine how well a model fits the data and is considered a robust statistical technique to validate scales (Brown, 2006; Kline, 2011). Despite evidence of low or no association, there is no consensus regarding the correlation between the DII’s functional and dysfunctional dimensions (Claes et al., 2000; Caci et al., 2003; Chico et al., 2003; Gao et al., 2011). Thus we tested two models in the CFA. First, we used the oblique model, which allows for the correlation between the factors (Brown, 2006). Secondly, we tested the orthogonal model, which forces the solution to reach uncorrelated latent variables (Brown, 2006). In both CFA models tested, the adjustment indicators did not reach the cut-off points established in the literature of CFI and TLI (≥0.95), and RMSEA (<0.07) (Brown, 2006; Kline, 2011, 2013). Therefore, we sought to identify the Br-DII factor structure through EFA.
The first EFA showed that three items (i.e., 4, 7, and 15) behaved differently from that of the original version (Dickman, 1990). We then performed the second EFA without those three items (4, 7, and 15) and found another two items (9 and 10) showing factor loading above 0.30 in a dimension different from that of the original proposal (Dickman, 1990). The third and last EFA was run excluding six items (i.e., 4, 7, 9, 10, and 15) showing a suitable fit in the model. The final version of the Br-DII had all parameters recommended for a good model fit [χ2(118) = 274.981; p < 0.001; CFI = 0.92, TLI = 0.90, RMSEA = 0.057], and all items behaved similarly to the original version (Dickman, 1990). When verifying the agreement between the two versions (18-items and 23-items) of the scale, it was possible to identify a small bias between the two versions, as well as a high correlation between the two scores of the versions. This fact can be related to the use of the mean for the final calculation of the score that even without the totality of the items being computed the mean was able to keep values close and highly correlated.
To test convergent and discriminant validity, we used the well-documented Barratt Impulsiveness Scale (BIS-11) (Malloy-Diniz et al., 2010), which focuses on the dysfunctional aspect of impulsivity. As expected, the BIS-11 had a strong correlation with the DII’s Dysfunctional dimension, while presenting a low and non-significant association with the DII’s Functional dimension. Cronbach’s alpha is an important measure of the internal consistency reliability (Field, 2009). For the Dysfunctional and Functional DII’s dimensions, respectively, the Cronbach’s alphas were 0.76 and 0.78 in the Spanish version (Chico et al., 2003); in the Italian version were 0.78 and 0.75 (Leone et al., 2002), in the French version were 0.79 and 0.75 (Caci et al., 2003), in the American version were 0.85 and 0.74 (Dickman, 1990), in the Chinese version Cronbach’s alphas for the control group were 0.75 and 0.68 (Gao et al., 2011), in the Dutch version were 0.85 and 0.84 (Claes et al., 2000). Our study also showed appropriate Cronbach’s alpha values (i.e., 0.75 and 0.73 for Dysfunctional and Functional impulsivity, respectively). The test-retest reliability assessment showed that the responses were stable over the 2-weeks period. The Intraclass Correlation Coefficient (ICC) was high for both DII’s dimensions (dysfunctional and functional) indicating good test-retest reliability (Cicchetti and Sparrow, 1981). Overall, the Br-DII showed good psychometric properties. However, studies with larger and more representative samples should be conducted in the future to ensure the maintenance of these qualities.
This study presents some limitations. First, we did not control for the presence of psychiatric disorders in our sample. Such control would allow us to verify if the instrument would be sensitive to identify patients with psychiatric disorders since dysfunctional impulsivity is a hallmark of several mental disorders (Moeller et al., 2001; Cackowski et al., 2014; Gray and MacKillop, 2015). Also, it would be possible to understand the role of functional impulsivity in this context. Another limitation concerns the characteristics of the sample that was composed of undergraduate students, which is not representative of the overall Brazilian population. The level of schooling is an important variable for several psychological scales and may influence their validity and reliability (Caldas et al., 2012). In the Brazilian context, education level is highly heterogeneous, although the younger generations had a substantial increase in school years. Most instruments have been developed in countries where educational levels are high, which can produce false-positive results when those instruments are applied to populations with low educational levels (De Yebenes et al., 2003). Therefore, we are aware that a more heterogeneous sample is recommended for testing the applicability of the DII in the Brazilian context.
Finally, it is possible to verify Dickman’s (1985, 1990) assumptions in an ecological context: (1) If subjects with higher functional impulsivity score respond better to relatively simple but time constraint tasks? (Dickman, 1985, 1990; Lage et al., 2012) (2) If there is an association between kinematic analysis and impulsivity in motor control? (Lage et al., 2012), and (3) If years of practices in different types of sports (with and without time restrictions) present different functional impulsivity scores (Lage et al., 2011). Therefore, the present study will make possible new investigations on the functional impulsivity topic.
In summary, the Dickman’s Impulsivity Inventory (DII) proposed by Dickman (1990) was translated and adapted to the Brazilian Portuguese language. The present study evaluated the psychometric properties of the Br-DII. The analyses suggested that the DII adaptation is valid and reliable for use in Brazilian samples.