Front. Microbiol. Frontiers in Microbiology Front. Microbiol. 1664-302X Frontiers Media S.A. 10.3389/fmicb.2017.02701 Microbiology Original Research Lipids, pH, and Their Interaction Affect the Inhibitory Effects of Carvacrol against Salmonella Typhimurium PT4 and Escherichia coli O157:H7 Carvalho Rhayane I. 1 de Jesus Medeiros Andrea S. 2 Chaves Maísa 1 de Souza Evandro L. 2 * Magnani Marciane 1 1Laboratório de Processos Microbianos em Alimentos, Departamento de Engenharia de Alimentos, Universidade Federal da Paraíba, Paraíba, Brazil 2Laboratório de Microbiologia de Alimentos, Departamento de Nutrição, Centro de Ciências da Saúde, Universidade Federal da Paraíba, Paraíba, Brazil

Edited by: Andrea Gomez-Zavaglia, Centro de Investigación y Desarrollo en Criotecnología de Alimentos (CIDCA), Argentina

Reviewed by: Fillipe Oliveira Pereira, Federal University of Campina Grande, Brazil; Cristina Paiva De Sousa, Federal University of São Carlos, Brazil; Chiara Montanari, Università di Bologna, Italy

*Correspondence: Evandro L. de Souza, evandroleitesouza@ccs.ufpb.br

This article was submitted to Food Microbiology, a section of the journal Frontiers in Microbiology

 15 01 2018 2017 8 2701 27 07 2017 26 12 2017 Copyright © 2018 Carvalho, de Jesus Medeiros, Chaves, de Souza and Magnani. 2018 Carvalho, de Jesus Medeiros, Chaves, de Souza and Magnani

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) or licensor are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

Although carvacrol (CAR) is considered an alternative antimicrobial for use in food, few is known about the influence of food-related parameters on its inhibitory effects against pathogens. This study assessed the influence of different amounts of proteins, using beef extract (BE) as a protein-rich source, lipids (LIP), using sunflower oil as a LIP-rich source, and pH values or their interaction on the inhibitory effects of CAR against Salmonella Typhimurium PT4 (ST) and Escherichia coli O157:H7 (EC). The specific maximum growth rate (μmax) and lag phase duration (λ) of the test pathogens when exposed to CAR in media with different amounts of BE (4, 6, and 8 g/100 mL), LIP (3.75, 5, and 6.25 mL/100 mL), and pH values (5, 5.5, and 6) were determined. The viable counts of the tested pathogens in media that promoted the highest and lowest μmax in the presence of CAR were monitored during 24 h. The lowest μmax of ST and EC exposed to 2.4 μL/mL (-1.29 and -0.82 log CFU/mL/h, respectively) or 4.8 μL/mL CAR (-1.44 and -2.17 log CFU/mL/h, respectively) were observed in media with the highest LIP amount (6.25 mL/100 mL) and pH value (pH 6). For both SE and EC, the longest λ (> 2 h) was verified in media where these pathogens showed the lowest μmax. These data indicate that the concomitant increase in LIP amounts and pH values affected positively the CAR inhibitory effects against the target pathogens. CAR (2.4 or 4.8 μL/mL) failed to inhibit the increase in ST and EC counts in media where the highest μmax values were previously observed. On the contrary, CAR inhibited the increase of ST counts (final counts 5 log CFU/mL) and decreased the EC counts (final counts 3.5 log CFU/mL) in media where the lowest μmax values were observed. These results show that the inhibitory effects of CAR on ST and EC in food matrices could be affected as a function of the interaction of LIP amounts and pH values.

 Salmonella pathogenic Escherichia coli terpenes antibacterial effect carvacrol Introduction

Antimicrobial preservatives have been largely used to ensure food safety and reduce the risk to consumers (Tiwari et al., 2009; Lucera et al., 2012). Increasing consumer awareness and concern regarding the use of synthetic preservatives in foods has increased demand for foods with low amounts or free of synthetic preservatives (Lucera et al., 2012; Souza et al., 2016). In this context, efforts have been conducted to study natural substances capable of preventing bacterial growth and survival in foods (Hintz et al., 2015; de Souza et al., 2016).

Carvacrol [(2-methyl-5-(1-methyilethyl) fenol; CAR] is a plant-derived phenolic monoterpene well known as the majority constituent of essential oils (EOs) from Origanum vulgare L. (Rodrigues et al., 2017). CAR is also commonly identified as the majority constituent in EOs from O. scabrum L. (Aligiannis et al., 2001) and Thymus vulgaris L. (Sacchetti et al., 2005). Studies have attributed to CAR the bioactivities of these EOs, particularly their antibacterial effects against foodborne pathogens (Aligiannis et al., 2001; Perricone et al., 2015). The in vitro antibacterial properties of CAR have been demonstrated in different food matrices, such as vegetables (Oliveira et al., 2015), fruit juices (Ait-Ouazzou et al., 2013), peanut paste (Chen et al., 2015), cheese (Honório et al., 2015), and meat (Luz et al., 2014).

Carvacrol is Generally Recognized as Safe (GRAS) by the Food and Drug Administration in doses typically used as food flavoring and preservative ingredient (Regulation number of the United States Code of Federal Regulations 172.515) (Food and Drug Administration [FDA], 2013; Suntres et al., 2015). The available literature demonstrates that CAR is capable of inhibiting foodborne pathogens in very low doses compared to other EOs’ individual constituents (Honório et al., 2015; de Souza et al., 2016). Furthermore, CAR does not induce direct-tolerance and cross-tolerance to traditional antimicrobials used in foods (e.g., acids or salts) or heat treatment in pathogenic bacteria (Luz et al., 2013, 2014).

The food matrix composition may affect the efficacy of antimicrobials because the high availability of nutrients typically favors the fast recovery of injured bacterial cells (Burt, 2004; de Souza et al., 2016). Additionally, the structural organization of the components in food matrices may also limit the contact of antimicrobials with bacterial cells (Burt, 2004; Carvalho et al., 2015). Consequently, higher doses of antimicrobials could be required in food matrices to obtain the same antimicrobial effect as observed in in vitro assays (Perricone et al., 2015; Pesavento et al., 2015; de Souza et al., 2016). Carbohydrates typically do not affect the antimicrobial effects of EOs, while the pH and protein could affect their inhibitory effects against foodborne pathogens (Burt, 2004; Calo et al., 2015). However, there is a lack of studies assessing the effects of the interaction of pH with lipids or proteins on the inhibitory effects of EOs or their individual constituents.

Amongst the pathogens frequently involved in food-related outbreak diseases, Salmonella Typhimurium phage-type (PT) 4 and Escherichia coli O157H:7 receive attention because they have been most associated cause of outbreak-related hospitalizations in the United States (Centers for Diseases Control and Prevention [CDC], 2017). An important feature of these bacteria is the capability of growing in a wide variety of foods (e.g., fat-rich and protein-rich foods), as well as in acidic beverages (Espina et al., 2013; Melo et al., 2017; Moon et al., 2017).

This study evaluated the influence of different amounts of proteins, lipids, and pH values on the inhibitory effects of CAR on S. Typhimurium PT4 and E. coli O157:H7. The minimum inhibitory concentration (MIC) of CAR and the specific maximum growth rate and lag phase duration of the test pathogens when exposed to CAR in media with different amounts of beef extract (BE; as a protein rich-source), sunflower oil (as a lipid-rich source), and pH values were determined.

 Materials and Methods CAR

Carvacrol (batch 0656-810; density at 20°C: 0.976; refractive index at 20°C: 1.522) was purchased from Sigma–Aldrich (Sigma–Aldrich, St. Louis, MO, United States). CAR dispersions were prepared in brain heart infusion broth (BHIB; Himedia, India) in a concentration range of 40–0.312 μL/mL using Tween 80 (1 mL/100 mL; Sigma–Aldrich, United States) as an emulsifier (Rodrigues et al., 2017). At the highest assayed concentration (1 mL/100 mL), Tween 80 presented no inhibitory effect against the tested bacterial strains.

 Test Strains and Growth Conditions

Salmonella enterica serovar Typhimurium phage-type (PT) 4 (S. Typhimurium PT4) isolated from chicken meat involved in outbreak occurred in the South of Brazil (Kottwitz et al., 2011) and E. coli O157:H7 isolated from food sample (kindly provided by Prof. Anderson de Souza Sant’Ana, Quantitative Food Microbiology Laboratory, Food Engineering Faculty, São Paulo, Brazil) were used as test strains. Stocks were maintained in cryovials at -20°C in BHIB containing glycerol (20 mL/100 mL). Working cultures were maintained in brain heart infusion agar (BHIA, Himedia, India) at 4 ± 0.5°C, and transferred to a new medium weekly.

All experiments were performed following the Standard Microbiological Practices required for Biosafety Level 2 (Centers for Diseases Control and Prevention [CDC], 2015). The inoculum of each strain was obtained after preparing suspensions in sterile saline solution (NaCl 0.85 g/100 mL) from cultures grown in BHIB at 37°C for 18–20 h (stationary growth phase), harvested through centrifugation (4500 × g, 15 min, 4°C), washed twice, and re-suspended in sterile saline solution (NaCl 0.85 g/100 mL) to obtain standard cell suspensions. Optical density of 0.08 and 0.09 at 625 nm provided viable cell counts of approximately 6 log CFU/mL for S. Typhimurium PT4 and E. coli O157H:7, respectively (Melo et al., 2017).

 Preparation of Cultivation Media

The inhibitory effects of CAR on the test strains were evaluated in media prepared with different amounts of proteins (PTN), lipids (LIP), and pH values. The different media were used as models with the purpose of simulating possible environmental conditions found by microorganisms in a variety of food matrices with low-acidic to neutral pH (5, 5.5, and 6), low to medium amounts of LIP (3.75, 5, and 6.25 mL/100 mL), or distinct PTN contents (4, 6, and 8 g/100 mL of BE).

The assays followed a full factorial design 23 as presented in Table 1, comprising 11 assays randomly performed. BE (75 g PTN/100g, Sigma–Aldrich, St. Louis, MO, United States) and sunflower oil (99 mL LIP/100 mL, Salada, Brazil) were used as a PTN- and LIP-rich source, respectively. To obtain the different media, BHIB was firstly added of BE at the desired amount, and sterilized in autoclave (121°C, 1.1 atm, 15 min). Subsequently, the corresponding amounts of sunflower oil previously sterilized (121°C, 1.1 atm, 15 min) were incorporated into the BHIB-BE media, vortexed for 15 s, and the pH value adjusted using HCl 1 mol/L (Gutierrez et al., 2009). The media were prepared in the same day of the experiments.

Codified and absolute values of beef extract (BE), lipids (LIP), and pH used in cultivation media for assays with carvacrol (CAR) following a full factorial design (23), and the respective minimal inhibitory concentration (MIC) of CAR against S. Typhimurium PT4 and E. coli O157H:7.

Media Codified value X1 (BE) Absolute value X1 (BE g/100 mL) Codified value X2 (LIP) Absolute value X2 (LIP mL/100 mL) Codified value X3 (pH) Absolute value X3 (pH) MIC (μL/mL) S. Typhimurium PT4 MIC (μL/mL) E. coli O157H:7
1 -1.00 4.00 -1.00 3.75 -1.00 5.00 9.6 9.6
2 1.00 8.00 -1.00 3.75 -1.00 5.00 9.6 9.6
3 -1.00 4.00 1.00 6.25 -1.00 5.00 9.6 9.6
4 1.00 8.00 1.00 6.25 -1.00 5.00 9.6 9.6
5 -1.00 4.00 -1.00 3.75 1.00 6.00 9.6 9.6
6 1.00 8.00 -1.00 3.75 1.00 6.00 9.6 9.6
7 -1.00 4.00 1.00 6.25 1.00 6.00 9.6 4.8
8 1.00 8.00 1.00 6.25 1.00 6.00 9.6 4.8
9 0.00 6.00 0.00 5.00 0.00 5.50 9.6 9.6
10 0.00 6.00 0.00 5.00 0.00 5.50 9.6 9.6
11 0.00 6.00 0.00 5.00 0.00 5.50 9.6 9.6
MIC Determination

The MIC values of CAR against the tested strains were determined using a previously described microdilution in broth procedure (Clinical and Laboratory Standards Institute [CLSI], 2012), with minor modifications related to the cultivation media and inoculum size. Initially, 50 μL of CAR emulsion in concentrations of 20–0.312 μL/mL in BHIB or 9.6–0.07 μL/mL in formulated media were dispensed into each well of a 96-well microplate. Subsequently, 50 μL of bacterial suspension (approximately 6 log CFU/mL) were added to each well. The microplate was loosely wrapped with cling wrap to prevent CAR volatilization. Each plate included controls without CAR. The systems were incubated at 37°C for 24 h. The MIC was defined as the lowest concentration of CAR capable of inhibiting the visible growth of the test strain (Carvalho et al., 2015).

 Assessing the Maximum Specific Growth Rate (<italic>μmax</italic>) and Lag Phase Duration (λ) of the Test Strains when Exposed to CAR

The growth of S. Typhimurium PT4 and E. coli O157:H7 was monitored in media containing 4.8 μL/mL (concentration corresponding to 1/2 MIC) or 2.4 μL/mL (concentration corresponding to 1/4 MIC) CAR in independent assays, using 96 well-microplates. Initially, 50 μL of the tested bacterial suspension (approximately 6 log CFU/mL) were added to each well containing 50 μL of the tested media. The bacterial growth was monitored by growth media turbidity in a microplate reader/incubator (EON, BioTek, United States) at 37°C each 2 h intervals during 24 h. Positive controls comprised the respective media inoculated with the test strain without CAR. Negative controls comprised the media containing CAR without the test strain. The μmax (log CFU/mL/h) and the λ (h) values were obtained from data of growth kinetics curves over time using the EON-Gen5 software (EON, BioTek, United States). For this, the microbial density read (turbidity of growth media) over the assessed time period in optical density at 625 nm (OD625) was log transformed into a logarithmic scale to obtain the logOD625/time-curve of the bacterial population after subtraction of the negative control (Gutierrez et al., 2008, 2009). Considering the logOD625/time-curve, the λ was the time of the transition to the exponential phase after the initial population had doubled. To obtain these parameters, EON-Gen5 calculated the value of the maximum slope (μmax) as follow: starting at the first time-point, the slope among the n-points of the time period selected for evaluation was evaluated. The operation was repeated starting at the second point, and repeated again, starting at the third point, and so on. Finally, all calculated slopes were compared to determine the maximum slope. The λ was the time interval between the line of maximum slope of the propagation phase and the absorbance baseline at time = 0 (EON-Gen5 software, EON, BioTek, United States).

 Assessing the Viable Counts of the Test Strains during Exposure to CAR in Selected Media

The viable counts of S. Typhimurium PT4 and E. coli O157:H7 were assessed during 24 h of incubation at 37°C in media that provided the highest and the lowest μmax values in turbidity assays (see section “Assessing the Maximum Specific Growth Rate (μmax) and Lag Phase Duration (λ) of the Test Strains when Exposed to CAR”). Viable counts of S. Typhimurium PT4 were assayed in media 6 and 8 containing 4.8 μL/mL CAR and media 3 and 7 containing 2.4 μL/mL CAR. Viable counts of E. coli O157:H7 were assayed in media 2 and 8 containing 4.8 μL/mL CAR and media 5 and 7 containing 2.4 μL/mL CAR (Table 1). Initially, 20 μL of each bacterial suspension (approximately 6 log CFU/mL) were inoculated into 3480 μL of the selected media containing CAR. The mixtures (final viable counts of approximately 5 log CFU/mL) were gently hand-shaken for 30 s and subsequently incubated at 37°C. At intervals of 0 (just after homogenization), 2, 4, 6, 8, 12, 14, 16, and 24 h of cultivation, a 100 μL-aliquot of each mixture was serially diluted in sterile saline solution, inoculated using a microdrop inoculation technique (Herigstad et al., 2001) on BHIA and incubated at 37°C for 24 h. Control media without CAR were similarly assayed. The results are expressed as log CFU/mL. The detection limit of the test was 2 log CFU/mL.

 Statistical Analysis and Reproducibility

All assays were performed in triplicate in three independent experiments and the results are expressed as an average of the obtained data. For MIC determination assays, the results are expressed as modal values because the MIC values did not vary in the independent experiments (Souza et al., 2016). For the μmax, λ, and viable counts assays, statistical analysis were performed to determine significant differences (p ≤ 0.05) using analysis of variance (ANOVA) followed by Tukey’s test or Student’s t-test. The results of μmax from turbidity assays were analyzed using response surface methodology (RSM) and the goodness-of-fit and statistical validity of the models generated by RSM were assessed by using one-factor ANOVA, as well as by providing the adjusted determination coefficient (R2adj) and the statistical significance of the regression models (p-value 0.05) (Bernardes et al., 2012). All analyses were performed using the Statistica software version 7.0 (StatSoft, Inc., Tulsa, OK, United States).

 Results MIC of CAR in Different Media

The MIC of CAR on S. Typhimurium PT4 was 9.6 μL/mL in all the different formulated media. The MIC of CAR on E. coli O157:H7 in different formulated media was 4.8 or 9.6 μL/mL (Table 1).

 <italic>μmax</italic> and λ of the Test Strains Exposed to CAR

The μmax of S. Typhimurium PT4 was higher (p ≤ 0.05) in media without CAR than in media containing 4.8 or 2.4 μL/mL CAR (Table 2). The lowest μmax of S. Typhimurium PT4 (-1.44 log CFU/mL/h) exposed to 4.8 μL/mL CAR was observed in medium with the highest amount of BE (8 g/100 mL) and LIP (6.25 mL/100 mL) at pH 6.0 (medium 8). S. Typhimurium PT4 (-1.29 CFU/mL/h) showed the lowest μmax when exposed to 2.4 μL/mL CAR in medium with 4 g/100 mL BE and 6.25 mL/100 mL LIP at pH 6.0 (medium 7). The highest μmax of S. Typhimurium PT4 (4.63 CFU/mL/h) exposed to 4.8 μL/mL CAR was observed in medium with 8 g/100 mL BE and 3.75 mL/100 mL LIP at pH 6.0 (medium 6). The highest μmax of S. Typhimurium PT4 (2.39 CFU/mL/h) exposed to 2.4 μL/mL CAR was observed in medium with 4 g/100 mL BE and 6.25 mL/100 mL LIP at pH 5.0 (medium 3) (Table 2).

Maximum specific growth rate (μmax; log CFU/mL/h) and lag phase (λ; h) of S. Typhimurium PT4 grown in media containing different concentrations of carvacrol (CAR).

Media Control μmax (log CFU/mL/h) CAR 4.8 μmax (log CFU/mL/h) CAR 4.8∗ λ (h) CAR 2.4 μmax (log CFU/mL/h) CAR 2.4∗∗ λ (h)
1 5.33 ± 0.20Ac 1.80 ± 0.15Ba 0.00 ± 0.00 2.39 ± 0.17Be 0.00 ± 0.00
2 4.50 ± 0.11Ae 1.82 ± 0.10Ba 0.00 ± 0.00 3.90 ± 0.28Bf 0.00 ± 0.00
3 5.01 ± 0.26Aac 2.39 ± 0.29Bb 0.00 ± 0.00 2.64 ± 0.23Be 0.00 ± 0.00
4 4.37 ± 0.07Af 1.28 ± 0.08Bc 0.00 ± 0.00 3.83 ± 0.21Bf 0.00 ± 0.00
5 4.95 ± 0.06Aab 1.79 ± 0.15Ba 0.00 ± 0.00 3.25 ± 0.15Bg 0.00 ± 0.00
6 5.12 ± 0.08Aac 1.80 ± 0.06Ba 0.00 ± 0.00 4.63 ± 0.20Ba 0.00 ± 0.00
7 3.00 ± 0.08Ag -1.29 ± 0.36Bd 3.48 ± 0.03a 1.45 ± 0.06Bc 0.00 ± 0.00
8 2.09 ± 0.04Ad -0.88 ± 0.03Be 2.30 ± 0.01b -1.44 ± 0.07Bb 2.40 ± 0.00a
9 2.33 ± 0.02Ad 1.97 ± 0.02Ba 0.00 ± 0.00 1.94 ± 0.05Bd 0.00 ± 0.00
10 2.37 ± 0.10Ad 1.95 ± 0.05Ba 0.00 ± 0.00 1.91 ± 0.03Bd 0.00 ± 0.00
11 2.35 ± 0.02Ad 1.89 ± 0.01Ba 0.00 ± 0.00 1.91 ± 0.06Bd 0.00 ± 0.00
Control: same formulation media without addition of CAR; CAR 4.8: media containing 4.8 μL/mL CAR; ∗ or ∗∗ all media assayed as control of CAR 4.8 or CAR 2.4 showed λ-value = 0; CAR 2.4: media containing 2.4 μL/mL CAR. A,BDifferent superscript capital letters in the same raw denote differences (p ≤ 0.05) in maximum specific growth rate obtained for each bacteria based on Student’s t-test; a-gDifferent superscript small letters in the same column denote differences (p ≤ 0.05) in maximum specific growth rate and lag phase obtained for each bacteria based on Tukey’s test.

The λ of S. Typhimurium PT4 varied from 0 to 3.48 h when the strain was exposed to 4.8 μL/mL CAR and from 0 to 2.4 h when this strain was exposed to 2.4 μL/mL CAR. S. Typhimurium PT4 showed the longest λ when exposed to 2.4 or 4.8 μL/mL CAR in medium with the same amount of LIP (6.25 mL/100 mL) at pH (6.0) but containing 4 g/100 mL (medium 7) and 8 g/100 mL (media 8) BE, respectively (Table 2).

Similarly to observed for S. Typhimurium PT4, the μmax of E. coli O157:H7 was always higher (p ≤ 0.05) in media without CAR than in media containing 4.8 or 2.4 μL/mL CAR (Table 3). The lowest μmax of E. coli O157:H7 (-2.17 CFU/mL/h) exposed to 4.8 μL/mL CAR was observed in medium with the highest amount of BE (8 g/100 mL) and LIP (6.25 mL/100 mL) at pH 6.0 (medium 8). E. coli O157:H7 (-1.02 CFU/mL/h) showed the lowest μmax when exposed to 2.4 μL/mL CAR in medium with 4 g/100 mL BE and 6.25 mL/100 mL LIP at pH 6.0 (medium 7). The highest μmax of E. coli O157:H7 (2.85 CFU/mL/h) exposed to 4.8 μL/mL CAR was observed in medium with 8 g/100 mL BE and 3.75 mL/100 mL LIP at pH 5.0 (medium 2). The highest μmax of E. coli O157:H7 exposed to 2.4 μL/mL CAR was observed in medium with 4 g/100 mL BE and 3.75 mL/100 mL LIP at pH 6.0 (medium 5) (Table 3).

Maximum specific growth rate (μmax; log CFU/mL/h) and lag phase (λ; h) of E. coli O157H:7 grown in media containing different concentrations of carvacrol (CAR).

Media Control μmax (log CFU/mL/h) CAR 4.8∗ μmax (log CFU/mL/h) CAR 4.8∗ λ (h) CAR 2.4 μmax (log CFU/mL/h) CAR 2.4∗∗ λ (h)
1 4.43 ± 0.08Ae 0.73 ± 0.14Be 0.00 ± 0.00 1.95 ± 0.16Be 0.00 ± 0.00
2 3.90 ± 0.04Af 2.85 ± 0.08Bf 0.00 ± 0.00 2.33 ± 0.13Bc 0.00 ± 0.00
3 2.20 ± 0.04Ab 1.86 ± 0.01Babcd 0.00 ± 0.00 2.50 ± 0.19Bc 0.00 ± 0.00
4 1.93 ± 0.01Acd 1.53 ± 0.14Bab 0.00 ± 0.00 1.60 ± 0.08Bd 0.00 ± 0.00
5 2.44 ± 0.02Aab 1.90 ± 0.21Bcd 0.00 ± 0.00 3.45 ± 0.11Ba 0.00 ± 0.00
6 1.72 ± 0.01Ad 1.25 ± 0.16Bg 0.00 ± 0.00 2.33 ± 0.19Bc 0.00 ± 0.00
7 1.69 ± 0.08Ad -1.39 ± 0.17Bh 4.30 ± 0.03a -1.02 ± 0.11Bb 1.77 ± 0.01
8 1.61 ± 0.07Ad -2.17 ± 0.29Bi 4.00 ± 0.03b -0.82 ± 0.21Bb 2.32 ± 0.01a
9 2.52 ± 0.12Aa 1.66 ± 0.01Babd 0.00 ± 0.00 1.98 ± 0.01Bde 1.02 ± 0.01c
10 2.25 ± 0.21Aac 1.70 ± 0.01Babd 0.00 ± 0.00 1.79 ± 0.01Bde 1.80 ± 0.00c
11 2.45 ± 0.25Aab 1.68 ± 0.03Babd 0.00 ± 0.00 1.86 ± 0.05Bde 1.78 ± 0.00c
Control: same formulation media without addition of CAR; CAR 4.8: media containing 4.8 μL/mL CAR; ∗ or ∗∗ all media assayed as control of CAR 4.8 or CAR 2.4 showed λ-value = 0; CAR 2.4: media containing 2.4 μL/mL CAR. A,BDifferent superscript capital letters in the same raw denote differences (p ≤ 0.05) in maximum specific growth rate obtained for each bacteria based on Student’s t-test; a-iDifferent superscript small letters in the same column denote differences (p ≤ 0.05) in maximum specific growth rate and lag phase obtained for each bacteria based on Tukey’s test.

The λ of E. coli O157:H7 varied from 0 to 4.30 h when the strain was exposed to 4.8 μL/mL CAR, and from 0 to 2.32 h when the strain was exposed to 2.4 μL/mL CAR (Table 3).

The Eqs 1 and 2 explain the effects of LIP and/or pH as well as of their interaction on the μmax of S. Typhimurium PT4 obtained in assays using 4.8 μL/mL (ST4.8) and 2.4 μL/mL (ST2.4) CAR, respectively. Similarly, the Eqs 3 and 4 explain the effects of LIP and pH as well as of their interaction on the μmax of E. coli O157:H7 in assays using 4.8 μL/mL (Ec4.8) and 2.4 μL/mL (Ec2.4) CAR, respectively. All models included only significant variables (p < 0.05) and their determination coefficient (R2adj) >0.85 showed a good fit to the experimental data.

Yμ⁢max⁡(ST4.8)=1.32−1.42⁢ X2−1.46⁢ X3−1.45⁢ X2⋅X3(R2=0.88) Yμ⁢max⁡(ST2.4)=2.4−1.92⁢ X2−2.01⁢ X2⋅X3(R2=0.89) Yμ⁢max⁡(Ec4.8)=1.05−1.72⁢ X2−1.84⁢ X3−1.63⁢ X2⋅X3(R2=0.90) Yμ⁢max⁡(Ec2.4)=1.63−1.95⁢ X2−1.11⁢ X3−1.86⁢ X2⋅X3(R2=0.94)

where X2 = LIP, X3 = pH, and Yμmax = specific maximum growth rate.

According to the response surface contours, the inhibitory effects caused by 4.8 μL/mL CAR on S. Typhimurium decreased when the LIP amount decreased (LIP effect) or when the LIP amount decreased and the pH increased (LIP–pH interaction effect) (Figure 1A). The inhibitory effect caused by 2.4 μL/mL CAR on S. Typhimurium was affected by LIP amount (LIP effect), pH values (pH effect), or their interaction (LIP–pH interaction effect); the lowest inhibitory effect of CAR was observed in medium prepared with the highest LIP amount and the lowest pH value (Figure 1B).

(A) Curves of surface response of μmax obtained from cultivation of S. Typhimurium PT4 in media with different amounts of LIP and pH values and 4.8 μL/mL carvacrol (CAR). (B) Curves of surface response of μmax obtained from cultivation of S. Typhimurium PT4 in media with different amounts of LIP and pH values and 2.4 μL/mL CAR.

The inhibitory effect caused by 4.8 μL/mL CAR on E. coli O157:H7 was decreased when the LIP amount decreased (LIP effect), pH decreased (pH effect), or when the LIP amount decreased and pH increased (LIP–pH interaction effect) (Figure 2A). The lowest inhibitory effects of CAR were observed in media prepared with the lowest LIP amount at the lowest pH value (Figure 2A). Similar effects of LIP, pH, or their interaction were observed for the inhibitory effects caused by 2.4 μL/mL CAR on E. coli O157:H7 (Figure 2B).

(A) Curves of surface response of μmax obtained from cultivation of E. coli O157H:7 in media with different amounts of LIP and pH values and 4.8 μL/mL carvacrol (CAR). (B) Curves of surface response of μmax obtained from cultivation of E. coli O157H:7 in media with different amounts of LIP and pH values and 2.4 μL/mL CAR.

The BE amount added in the cultivation media did not influence the inhibitory effects of CAR against the test pathogens under the experimental conditions assayed. The data were experimentally validated in three independent experiments performed under the optimized conditions according to the analysis of the RSM.

 Effects of CAR on Bacterial Counts in Selected Media

The viable counts of S. Typhimurium PT4 during 24 h-exposure to 4.8 μL/mL CAR in media 6 and 8 that provided the highest and lowest μmax, respectively, are shown in Figure 3A. S. Typhimurium PT4 exhibited lower counts (p ≤ 0.05) in media containing CAR compared to media without CAR. An increase (p ≤ 0.05) of approximately 2 log units in counts of S. Typhimurium PT4 was observed in the earlier 8 h of exposure to CAR in medium 6, with no increase (p > 0.05) in counts in the further monitored exposure time intervals. No changes were observed in counts of S. Typhimurium PT4 during the 24 h of exposure to 4.8 μL/mL CAR in medium 8 (selected because provided the lowest μmax). An increase (p ≤ 0.05) near to 3 log units was observed in counts of S. Typhimurium PT4 in the earlier 16 h of exposure to 2.4 μL/mL CAR in medium 3 (selected because provided the highest μmax). Otherwise, no changes (p > 0.05) were observed in counts of S. Typhimurium PT4 during the 24 h of exposure to 2.4 μL/mL CAR in medium 7 (selected because provided the lowest μmax) (Figure 3B).

Viable cell counts of S. Typhimurium PT4 in media at 37°C during exposure to (A) 4.8 μL/mL or (B) 2.4 μL/mL carvacrol (CAR). () Counts in media corresponding to the highest μmax (6 or 3) without addition of CAR; (×) counts in media corresponding to the highest μmax (6 or 3); () counts of media corresponding to the lowest μmax without CAR (8 or 7); () counts in media corresponding to the lowest μmax (8 or 7). Detection limit of the test: 2.0 log CFU/mL. The error bars represent the standard deviation.

The counts of E. coli O157H:7 during the 24 h exposure to 4.8 μL/mL CAR in media 2 and 8 (selected because provided the highest and lowest μmax, respectively) are shown in Figure 4A. E. coli O157H:7 exhibited lower counts (p ≤ 0.05) in media containing CAR compared to media without CAR. E. coli O157:H7 increased the counts (p ≤ 0.05) in approximately 2 log units in the earlier 8 h of exposure to CAR in medium 2, with no changes (p > 0.05) in counts in the further monitored exposure time intervals. A decrease (p ≤ 0.05) near to 1.5 log units in counts of E. coli O157:H7 was observed after 12 h of exposure to 4.8 μL/mL CAR in medium 8 (Figure 4A). An increase (p ≤ 0.05) near to 3 log units was observed in counts of E. coli O157H:7 in the earlier 6 h of exposure to 2.4 μL/mL CAR in medium 5 (selected because provided the highest μmax). Otherwise, a decrease (p ≤ 0.05) of approximately 1.5 log were observed in initial counts of E. coli O157H:7 exposed to 2.4 μL/mL CAR in medium 7 (selected because promoted the lowest μmax) over the monitored exposure time period (Figure 4B).

Viable cell counts of E. coli O157H:7 in media at 37°C during exposure to (A) 4.8 μL/mL or (B) 2.4 μL/mL carvacrol (CAR). () Counts in media corresponding to the highest μmax (3 or 2) without CAR; (×) counts in media corresponding to the highest μmax (3 or 2); () counts in media corresponding to the lowest μmax without CAR (7 or 8); () counts in media corresponding to the lowest μmax (7 or 8). Detection limit of the test: 2.0 log CFU/mL. The error bars represent the standard deviation.

 Discussion

The highest inhibitory effects of CAR were observed in media with the highest LIP amounts and pH value tested despite of the BE or CAR amounts. The influence of LIP, pH, or their interaction on CAR antibacterial effects, according to the models of Eqs 1–4, explain the increased μmax of both tested pathogens during exposure to CAR in media with the lowest LIP amount assayed. Overall, the effects of LIP, pH, and their interaction explain the negative μmax observed for the test pathogens during exposure to CAR in media with the highest LIP amount assayed at pH 6.0.

The LIP–pH interaction probably caused the decreased inhibitory effects of CAR on S. Typhimurium PT4 and E. coli O157:H7 in acidic media, in opposite to reports of previous studies (Burt, 2004; Gutierrez et al., 2009; Negi, 2012). The negative impact of LIP on antimicrobial effects of phenolics has been associated with the decrease availability of the later in aqueous phase, which primarily binds to LIP and, consequently, do not target the bacterial cells that are mostly in aqueous phase of growth substrates (Smith-Palmer et al., 2001; Perricone et al., 2015). An earlier study reported decrease of CAR inhibitory effect on Salmonella Tennesse in high-LIP peanut paste (50% LIP). However, in the same study, CAR failed to inhibit Salmonella growth in low-LIP peanut (<5%) when the aw increased as a result of the interaction of growth substrate intrinsic factors (Chen et al., 2015).

Probably, in the conditions tested in this study, the effects of the pH in media might limit the CAR–LIP affinity and, consequently, CAR maintained the efficacy to inhibit the test pathogens even in high-LIP amounts. The presence of high-LIP amounts in the media may promote changes on the extracellular environment, which could increase the interaction of CAR (as a prevalent hydrophobic molecule) with the bacterial cytoplasmic membrane (Ultee et al., 2002; Raei et al., 2017). Environmental characteristics that facilitate CAR to reach bacterial membranes have been considered important factors to enhance their antibacterial efficacy (Knowles and Roller, 2001).

Interestingly, a previous study reported decrease of the μmax of L. monocytogenes in media with 10 g/100 mL LIP and oregano EO (CAR-chemotype), suggesting that the added-LIP amount enhanced the antibacterial efficacy of the tested EO (Gutierrez et al., 2008); however, the effects of pH or a possible LIP–pH interaction were not considered.

The λ of S. Typhimurium PT4 and E. coli O157:H7 varied in media containing or not CAR (2.4 or 4.8 μL/mL). For both the tested pathogens, the longest λ was observed in media where the strains showed the lowest μmax. Probably, the stress caused by the exposure to CAR in these media delayed the bacterial cell metabolism, requiring a longer time for bacterial cell adaptation and further increase in bacterial cell population (Lee et al., 2015; Suntres et al., 2015).

Counts of S. Typhimurium PT4 increased during exposure to CAR in media that promoted the highest μmax of this pathogen, showing that CAR failed to inhibit the growth of S. Typhimurium PT4 over time. It is interesting to note that in these media the test strain did not require time for adaptation (λ = 0) even in the presence of CAR. Probably, the negative effects of LIP and pH on CAR inhibitory effects in a media with high availability of nutrients induced a fast and intense bacterial metabolic activity. Otherwise, in media where S. Typhimurium PT4 showed the lowest μmax and longer λ, CAR exhibited bacteriostatic effects delaying the bacterial growth over time.

Counts of E. coli O157H:7 increased in media where the pathogen showed the highest μmax and decreased in media where the lowest μmax was observed despite of the CAR amount. Thus, CAR exerted antibacterial effects even at sub-MICs in media where pH and LIP did not affect its efficacy. CAR uptake through the outer bacterial membrane is self-promoted because of the CAR ability to interact with the structure of the lipopolysaccharide barrier (Luz et al., 2014). This feature may facilitate the action of CAR even at sub-MICs because once into the cell, CAR can cause a disturbance in protein synthesis and functions (Sousa et al., 2015).

To the best of our knowledge, this is the first study that assessed the effects of the LIP–pH interaction on the inhibitory effects of CAR against S. Typhimurium PT4 and E. coli O157H:7. The results showed that the increase in LIP amounts and pH values enhances the inhibitory effects of CAR on S. Typhimurium PT4 and E. coli O157H:7, primarily as a result of the LIP-pH interaction. These findings indicate that the influence of LIP and pH on the antibacterial effects of CAR should be considered for the use of this compound as an antimicrobial preservative in food matrices to avoid failure on the expected microbial control.

 Author Contributions

MM and ELS conceived and designed the experiments. RIC, AJM, and MC performed the experiments. RIC, ELS, and MM analyzed the data and drafted the paper.

 Conflict of Interest Statement

The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.

The authors thank the CNPq-Brazil by financial support and CAPES-Brazil for the scholarship awarded for RIC, and to Prof. Anderson de Souza Sant’Ana for gently supply of the E. coli O157:H7 strain used in the experiments.

 References Ait-Ouazzou A. Espina L. García-Gonzalo D. Pagán R. (2013). Synergistic combination of physical treatments and carvacrol for Escherichia coli O157:H7 inactivation in apple, mango, orange, and tomato juices. Food Control 32 159–167. 10.1016/j.foodcont.2012.11.036 Aligiannis N. Kalpoutzakis E. Mitaku S. Chinou I. B. (2001). Composition and antimicrobial activity of the essential oils of two Origanum species. J. Agric. Food Chem. 49 4168–4170. 10.1021/jf001494m Bernardes P. C. de Andrade N. J. Penã W. E. L. Minim L. A. Sá J. P. N. Fernandes P. E. (2012). Modeling of the adhesion of Bacillus cereus isolated from a dairy plant as a function of time and temperature. J. Food Process Eng. 36 187–191. 10.1016/j.idairyj.2013.08.006 Burt S. (2004). Essential oils: their antibacterial properties and potential applications in foods–a review. Int. J. Food Microbiol. 94 223–253. 10.1016/j.ijfoodmicro.2004.03.022 15246235 Calo J. R. Crandall P. G. O’ Bryan C. A. Ricke S. C. (2015). Essential oils as antimicrobials in food systems – a review. Food Control 54 111–119. 10.1016/j.foodcont.2014.12.040 Carvalho R. J. Souza G. T. Honório V. G. Sousa J. P. Conceição M. L. Magnani M. (2015). Comparative inhibitory effects of Thymus vulgaris L. essential oil against Staphylococcus aureus, Listeria monocytogenes and mesophilic starter co-culture in cheese-mimicking models. Food Microbiol. 52 59–65. 10.1016/j.fm.2015.07.003 26338117 Centers for Diseases Control and Prevention [CDC] (2015). Laboratory Biosafety Levels Criteria. Available at: https://www.cdc.gov/biosafety/publications/bmbl5/bmbl5_sect_iv.pdf [accessed May 15, 2015]. Centers for Diseases Control and Prevention [CDC] (2017). Estimates of Foodborne Illnes in the United States. Available at: http://www.cdc.gov/salmonella/outbreaks.html [accessed July 24, 2017]. Chen W. Golden D. A. Critzer F. J. Davidson P. M. (2015). Antimicrobial activity of cinnamaldehyde, carvacrol, and lauric arginate against Salmonella Tennessee in a glycerol-sucrose model and peanut paste at different fat concentrations. J. Food Prot. 78 1488–1495. 10.4315/0362-028X.JFP-14-599 26219362 Clinical and Laboratory Standards Institute [CLSI] (2012). Performance Standards for Antimicrobial Susceptibility Testing: Twenty-first Informational, Document M100-S22, Vol. 32. Wayne, PA: CLSI de Souza E. Almeida E. T. C. De Sousa Guedes J. P. (2016). The potential of the incorporation of essential oils and their individual constituents to improve microbial safety in juices: a review. Compr. Rev. Food Sci. Food Saf. 15 753–772. 10.1111/1541-4337.12208 Espina L. Gelaw T. K. de Lamo-Castellvi S. Pagán R. Garcia-Gonzalo D. (2013). Mechanism of bacterial inactivation by ()-limonene and its potential use in food preservation combined processes. PLOS ONE 8:e56769. 10.1371/journal.pone.0056769 23424676 Food and Drug Administration [FDA] (2013). Everything Added to Food in United States (EAFUS) and Carvacrol. Available at: http://www.fda.gov [acessed August 30, 2017]. Gutierrez J. Barry-Ryan C. Bourke P. (2008). The antimicrobial efficacy of plant essential oil combinations and interactions with food ingredients. Int. J. Food Microbiol. 124 91–97. 10.1016/j.ijfoodmicro.2008.02.028 18378032 Gutierrez J. Barry-Ryan C. Bourke P. (2009). Antimicrobial activity of plant essential oils using food model media: efficacy, synergistic potential and interactions with food components. Food Microbiol. 26 142–150. 10.1016/j.fm.2008.10.008 19171255 Hintz T. Matthews K. K. Di R. (2015). The use of plant antimicrobial compounds for food preservation. Biomed Res. Int. 246264 1–12. 10.1155/2015/246264 26539472 Herigstad B. Hamilton M. Heersink J. (2001). How to optimize the drop plate method for enumerating bacteria. J. Microbiol. Methods 44 121–129. 10.1016/S0167-7012(00)00241-4 11165341 Honório V. G. Bezerra J. Souza G. T. Carvalho R. J. Gomes Neto N. J. Figueiredo R. C. B. Q. (2015). Inhibition of Staphylococcus aureus cocktail using the synergies of oregano and rosemary essential oils or carvacrol and 1,8-cineole. Front. Microbiol. 6:1223. 10.3389/fmicb.2015.01223 Knowles J. Roller S. (2001). Efficacy of chitosan, carvacrol, and a hydrogen peroxide-based biocide against foodborne microorganisms in suspension and adhered to stainless steel. J. Food Prot. 64 1542–1548. 11601703 Kottwitz L. B. M. Scheffer M. C. Dalla-Costa L. M. Farah S. M. Moscalewski W. S. B. Magnani M. (2011). Molecular characterization and resistance profile of Salmonella Enteritidis PT4 and PT9 strains isolated in Brazil. J. Med. Microbiol. 60 1026–1031. 10.1099/jmm.0.028597-0 21459909 Lee H. Kim K. Lee S. Yoon Y. (2015). Kinetic behaviour of Staphylococcus aureus on cheese as a function of water activity and temperature. J. Dairy Res. 82 64–69. 10.1017/S0022029914000569 25381918 Lucera A. Costa C. Conte A. Del Nobile M. A. (2012). Food applications of natural antimicrobial compounds. Front. Microbiol. 3:287. 10.3389/fmicb.2012.00287 Luz I. S. Gomes-Neto N. J. Magnani M. De Souza E. L. (2014). Assessment of tolerance induction by Origanum vulgare L. essential oil or carvacrol in Pseudomonas aeruginosa cultivated in a meat-based broth and in a meat model. Food Sci. Technol. Int. 7 1–10. 10.1177/1082013214554467 25293767 Luz I. S. Gomes Neto N. J. Tavares A. G. Nunes P. C. Magnani M. Souza E. L. (2013). Lack of induction of direct protection or cross-protection in Staphylococcus aureus by sublethal concentrations of Origanum vulgare L. essential oil and carvacrol in a meat-based medium. Arch. Microbiol. 195 587–593. 10.1007/s00203-013-0907-5 23794091 Melo A. N. F. Souza G. T. Schaffner D. Oliveira T. C. Maciel J. F. Souza E. L. (2017). Changes in thermo-tolerance and survival under simulated gastrointestinal conditions of Salmonella Enteritidis PT4 and Salmonella Typhimurium PT4 in chicken breast meat after exposure to sequential stresses. Int. J. Food Microbiol. 251 15–23. 10.1016/j.ijfoodmicro.2017.03.022 28380343 Moon H. Kim N. H. Kim S. H. Kim Y. Ryu J. H. Rhee M. S. (2017). Teriyaki sauce with carvacrol or thymol effectively controls Escherichia coli O157:H7, Listeria monocytogenes, Salmonella Typhimurium, and indigenous flora in marinated beef and marinade. Meat Sci. 129 147–152. 10.1016/j.meatsci.2017.03.001 28285115 Negi P. S. (2012). Plant extracts for the control of bacterial growth: efficacy, stability and safety issues for food application-a review. Int. J. Food Microbiol. 156 7–17. 10.1016/j.ijfoodmicro.2012.03.006 22459761 Oliveira K. A. R. Medeiros J. A. C. Figueiredo R. C. B. Q. Magnani M. Siqueira Junior J. P. Souza E. L. (2015). Synergistic inhibition of bacteria associated with minimally processed vegetables in mixed culture by carvacrol and 1,8-cineole. Food Control 47 334–339. 10.1016/j.foodcont.2014.07.014 Perricone M. Arace E. Corbo M. R. Sinigaglia M. Bevilacqua A. (2015). Bioactivity of essential oils: a review on their interaction with food components. Front. Microbiol. 6:76. 10.3389/fmicb.2015.00076 25709605 Pesavento G. Calonico C. Bilia A. R. Barnabei M. Calesini F. Addona R. (2015). Antibacterial activity of oregano, rosmarinus and thymus essential oils against Staphylococcus aureus and Listeria monocytogenes in beef meatballs. Food Control 54 188–199. 10.1016/j.foodcont.2015.01.045 Raei P. Pourlak T. Memar M. Y. Alizadeh N. Aghamali M. Zeinalzadeh E. (2017). Thymol and carvacrol strongly inhibit biofilm formation and growth of carbapenemase-producing Gram negative bacilli. Cell. Mol. Biol. (Noisy-le-grand) 63 108–112. 10.14715/cmb/2017.63.5.20 28719354 Rodrigues J. B. S. Carvalho R. J. Souza N. T. Oliveira K. S. Franco O. L. Schaffner D. (2017). Effects of oregano essential oil and carvacrol on biofilms of Staphylococcus aureus from food-contact surfaces. Food Control 73 1237–1246. 10.1016/j.foodcont.2016.10.043 Sacchetti G. Maietti S. Muzzoli M. Scaglianti M. Manfredini S. Radice M. (2005). Comparative evaluation of 11 essential oils of different origin as functional antioxidants, antiradicals and antimicrobials in foods. Food Chem. 91 621–632. 10.1016/j.foodchem.2004.06.031 Smith-Palmer A. Stewart J. Fyfe L. (2001). The potential application of plant essential oils as natural food preservatives in soft cheese. Food Microbiol. 18 463–470. 10.1006/fmic.2001.0415 Sousa J. P. Oliveira K. A. R. Figueiredo R. C. B. Q. Souza E. L. (2015). Influence of carvacrol and 1,8-cineole on cell viability, membrane integrity, and morphology of Aeromonas hydrophila cultivated in a vegetable-based broth. J. Food Prot. 78 424–429. 10.4315/0362-028X.JFP-14-242 25710162 Souza G. T. Carvalho R. J. Sousa J. P. Tavares J. F. Schaffner D. Souza E. L. (2016). Effects of the essential oil from Origanum vulgare L. on survival of pathogenic bacteria and starter lactic acid bacteria in semihard cheese broth and slurry. J. Food Prot. 79 246–252. 10.4315/0362-028X.JFP-15-172 26818985 Suntres Z. E. Coccimiglio J. Alipour M. (2015). The bioactivity and toxicological actions of carvacrol. Crit. Rev. Food Sci. Nutr. 55 304–318. 10.1080/10408398.2011.653458 24915411 Tiwari B. K. Valdramidis V. P. O’Donnell C. P. Muthukumarappan K. Bourke P. Cullen P. J. (2009). Application of natural antimicrobials for food preservation. J. Agric. Food Chem. 57 5987–6000. 10.1021/jf900668n 19548681 Ultee A. Bennik M. H. J. Moezelaar R. (2002). The phenolic hydroxyl group of carvacrol is essential for action against the food-borne pathogen Bacillus cereus. Appl. Environ. Microbiol. 68 1561–1568. 10.1128/AEM.68.4.1561-1568.2002 11916669