Front. Mech. Eng. Frontiers in Mechanical Engineering Front. Mech. Eng. 2297-3079 Frontiers Media S.A. 1731677 10.3389/fmech.2025.1731677 Correction Correction: Designing an E-smart manufacturing readiness assessment tool for small and medium automotive businesses Frontiers Production Office 10.3389/fmech.2025.1731677 Frontiers Production Office * Frontiers Media SA, Lausanne, Switzerland Correspondence: Frontiers Production Office, production.office@frontiersin.org 10 12 2025 2025 11 1731677 24 10 2025 27 10 2025 Copyright © 2025 Frontiers Production Office. 2025 Frontiers Production Office https://creativecommons.org/licenses/by/4.0/ This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. A Correction on Designing an E-smart manufacturing readiness assessment tool for small and medium automotive businesses by Rahamaddulla SR, Sorooshian S, Osman AA, Kamar ANN and Leman Z (2025). Front. Mech. Eng. 11:1540287. doi: 10.3389/fmech.2025.1540287 smart manufacturing industrial revolution readiness assessment fuzzy Delphi technique small and medium enterprise (SME) section-in-acceptance Digital Manufacturing

Affiliation “Faculty of Engineering and Sustainable Development, University of Gävle, Gävle, Sweden” was omitted for author Shahryar Sorooshian. This affiliation has now been added for author Shahryar Sorooshian.

Affiliation “School of Technology Management and Logistics, College of Business, Universiti Utara Malaysia, Kedah Darul Aman, Malaysia” was omitted for author Azim Azuan Osman. This affiliation has now been added for author Azim Azuan Osman.

Author Azim Azuan Osman was erroneously assigned to affiliation “Faculty of Industrial Management, Universiti Malaysia Pahang Al-Sultan Abdullah, Kuantan, Pahang Darul Makmur, Malaysia.” This affiliation has now been removed for author Azim Azuan Osman.

The original article has been updated.

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland