Front. Mater. Frontiers in Materials Front. Mater. 2296-8016 Frontiers Media S.A. 1613549 10.3389/fmats.2025.1613549 Materials Correction Corrigendum: Performance optimization of asphalt pavements using binder film thickness as a criterion in innovative mix design compared to Marshall and Superpave methods Khan et al. 10.3389/fmats.2025.1613549 Khan Muhammad Adeel 1 Khan Muhammad Salman 1 * Nasir Bilal 2 Khan Asad 1 Sabri Sabri Mohanad Muayad 3 Ahmad Mahmood 4 5 * Qamar Wajeeha 6 Gonzalez-Lezcano Roberto Alonso 7 1 Department of Bridge Engineering, College of Civil Engineering, Tongji University, Shanghai, China 2 Department of Transportation Engineering, H-12 Campus, NUST Islamabad, Islamabad, Pakistan 3 Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia 4 Institute of Energy Infrastructure, Universiti Tenaga Nasional, Kajang, Malaysia 5 Department of Civil Engineering, University of Engineering and Technology Peshawar (Bannu Campus), Bannu, Pakistan 6 Department of Civil Engineering, Institute of Engineering and Fertilizer Research, Faisalabad, Pakistan 7 Department of Architecture and Design, Escuela Politécnica Superior, Montepríncipe Campus, Universidad San Pablo-CEU, CEU Universities, Madrid, Spain

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland

 *Correspondence: Muhammad Salman Khan, salman@tongji.edu.cn; Mahmood Ahmad, ahmadm@uniten.edu.my 13 05 2025 2025 12 1613549 17 04 2025 18 04 2025 Copyright © 2025 Khan, Khan, Nasir, Khan, Sabri Sabri, Ahmad, Qamar and Gonzalez-Lezcano. 2025 Khan, Khan, Nasir, Khan, Sabri Sabri, Ahmad, Qamar and Gonzalez-Lezcano

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

 A Corrigendum on Performance optimization of asphalt pavements using binder film thickness as a criterion in innovative mix design compared to Marshall and Superpave methods by Khan MA, Khan MS, Nasir B, Khan A, Sabri MMS, Ahmad M, Qamar W and Gonzalez-Lezcano RA (2025). Front. Mater. 11:1488310. doi: 10.3389/fmats.2024.1488310 marshall mix design superpave gyratory compacted mix design binder film thickness optimum binder content asphalt content section-at-acceptance Structural Materials

In the published article, there was an error in the Funding statement. The correct Funding statement appears below.

Funding

The author(s) declare that financial support was received for the research and/or publication of this article. This research was supported by a grant from the Russian Science Foundation No. 22-79-10021, https://rscf.ru/project/22-79-10021/.

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

 Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.