Front. Mater.Frontiers in MaterialsFront. Mater.2296-8016Frontiers Media S.A.153290610.3389/fmats.2024.1532906MaterialsErratumErratum: Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing ageFrontiers Production Office10.3389/fmats.2024.1532906Frontiers Production Office*Frontiers Media SA, Lausanne, Switzerland
Approved by:Frontiers Editorial Office, Frontiers Media SA, Switzerland
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
An Erratum on Prediction and analysis of strength and economic feasibility of filling materials under the influence of mix proportion and curing age by Zhang Y, Liang H, Fei S, Zhang A, Yu J and Qin X (2024). Front. Mater. 11:1428859. doi: 10.3389/fmats.2024.1428859curing ageMLPLSTMstrengthpredictioneconomic analysissection-at-acceptanceComputational Materials Science
Due to a production error, there was a mistake in Figure 1 as published. The corrected Figure 1 appears below.
Technical route.
The publisher apologizes for this mistake.
The original version of this article has been updated.