Front. Mater. Frontiers in Materials Front. Mater. 2296-8016 Frontiers Media S.A. 1228163 10.3389/fmats.2023.1228163 Materials Correction Corrigendum: Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings Akkaya et al. 10.3389/fmats.2023.1228163 Akkaya Ufuk Gökhan 1 * Çinku Kenan 1 Yilmaz Erol 2 1 Department of Mining Engineering, Faculty of Engineering, Istanbul University-Cerrahpasa, Istanbul, Turkiye 2 Department of Civil Engineering, Geotechnical Division, Recep Tayyip Erdogan University, Rize, Turkiye

Edited by: Antonio Caggiano, Darmstadt University of Technology, Germany

Reviewed by: Xiao Gu, Northeastern University, China

Ahmad Jamshidi, Tarbiat Modares University, Iran

 *Correspondence: Ufuk Gökhan Akkaya, ufukhan@iuc.edu.tr 27 06 2023 2023 10 1228163 24 05 2023 20 06 2023 Copyright © 2023 Akkaya, Çinku and Yilmaz. 2023 Akkaya, Çinku and Yilmaz

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

 A Corrigendum on Characterization of strength and quality of cemented mine backfill made up of lead-zinc processing tailings by Akkaya UG, Cinku K and Yilmaz E (2021). Front. Mater. 8:740116. doi: 10.3389/fmats.2021.740116 sulphurous tailing sulphate attack mine backfill hydraulic binder mechanical strength section-at-acceptance Structural Materials

In the published article there is a missing Reference. This has now been inserted in Table 3 and should read:

“TABLE 3 | ICP MS results of the tailings (Tuylu, 2016).”

The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

 References Tuylu S. (2016). Determination of optimum design conditions of paste materials for disposal of mineral processing tailings (in Turkish). Istanbul: I.U. Institute of Science and Technology. PhD Thesis.