<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing DTD v2.3 20070202//EN" "journalpublishing.dtd">
<article article-type="research-article" dtd-version="2.3" xml:lang="EN" xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">Front. Earth Sci.</journal-id>
<journal-title>Frontiers in Earth Science</journal-title>
<abbrev-journal-title abbrev-type="pubmed">Front. Earth Sci.</abbrev-journal-title>
<issn pub-type="epub">2296-6463</issn>
<publisher>
<publisher-name>Frontiers Media S.A.</publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="publisher-id">1487480</article-id>
<article-id pub-id-type="doi">10.3389/feart.2025.1487480</article-id>
<article-categories>
<subj-group subj-group-type="heading">
<subject>Earth Science</subject>
<subj-group>
<subject>Original Research</subject>
</subj-group>
</subj-group>
</article-categories>
<title-group>
<article-title>Quantitative matching of CO<sub>2</sub> amounts via seismic attributes in the Sleipner field</article-title>
<alt-title alt-title-type="left-running-head">Cheong et al.</alt-title>
<alt-title alt-title-type="right-running-head">
<ext-link ext-link-type="uri" xlink:href="https://doi.org/10.3389/feart.2025.1487480">10.3389/feart.2025.1487480</ext-link>
</alt-title>
</title-group>
<contrib-group>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Cheong</surname>
<given-names>Snons</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="corresp" rid="c001">&#x2a;</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2801368/overview"/>
<role content-type="https://credit.niso.org/contributor-roles/conceptualization/"/>
<role content-type="https://credit.niso.org/contributor-roles/data-curation/"/>
<role content-type="https://credit.niso.org/contributor-roles/methodology/"/>
<role content-type="https://credit.niso.org/contributor-roles/writing-original-draft/"/>
<role content-type="https://credit.niso.org/contributor-roles/Writing - review &#x26; editing/"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Yelisetti</surname>
<given-names>Subbarao</given-names>
</name>
<xref ref-type="aff" rid="aff2">
<sup>2</sup>
</xref>
<role content-type="https://credit.niso.org/contributor-roles/formal-analysis/"/>
<role content-type="https://credit.niso.org/contributor-roles/supervision/"/>
<role content-type="https://credit.niso.org/contributor-roles/Writing - review &#x26; editing/"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Sanchez</surname>
<given-names>Veronica</given-names>
</name>
<xref ref-type="aff" rid="aff2">
<sup>2</sup>
</xref>
<role content-type="https://credit.niso.org/contributor-roles/conceptualization/"/>
<role content-type="https://credit.niso.org/contributor-roles/Writing - review &#x26; editing/"/>
</contrib>
</contrib-group>
<aff id="aff1">
<sup>1</sup>
<institution>Geological Carbon Storage Research Center, Korea Institute of Geoscience and Mineral Resources</institution>, <addr-line>Daejeon</addr-line>, <country>Republic of Korea</country>
</aff>
<aff id="aff2">
<sup>2</sup>
<institution>Department of Physics and Geosciences</institution>, <institution>Texas A&#x26;M University-Kingsville</institution>, <addr-line>Kingsville</addr-line>, <addr-line>TX</addr-line>, <country>United States</country>
</aff>
<author-notes>
<fn fn-type="edited-by">
<p>
<bold>Edited by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/1174987/overview">Zhenwei Guo</ext-link>, Central South University, China</p>
</fn>
<fn fn-type="edited-by">
<p>
<bold>Reviewed by:</bold> <ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/936493/overview">Nocito Francesco</ext-link>, University of Bari Aldo Moro, Italy</p>
<p>
<ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/1392943/overview">Muhammad Imran Rashid</ext-link>, University of Engineering and Technology, Lahore, Pakistan</p>
<p>
<ext-link ext-link-type="uri" xlink:href="https://loop.frontiersin.org/people/2169928/overview">Dario Buttitta</ext-link>, National Institute of Geophysics and Volcanology, Section of Palermo, Italy</p>
</fn>
<corresp id="c001">&#x2a;Correspondence: Snons Cheong, <email>snons@kigam.re.kr</email>
</corresp>
</author-notes>
<pub-date pub-type="epub">
<day>05</day>
<month>08</month>
<year>2025</year>
</pub-date>
<pub-date pub-type="collection">
<year>2025</year>
</pub-date>
<volume>13</volume>
<elocation-id>1487480</elocation-id>
<history>
<date date-type="received">
<day>28</day>
<month>08</month>
<year>2024</year>
</date>
<date date-type="accepted">
<day>27</day>
<month>06</month>
<year>2025</year>
</date>
</history>
<permissions>
<copyright-statement>Copyright &#xa9; 2025 Cheong, Yelisetti and Sanchez.</copyright-statement>
<copyright-year>2025</copyright-year>
<copyright-holder>Cheong, Yelisetti and Sanchez</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/">
<p>This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.</p>
</license>
</permissions>
<abstract>
<p>The Sleipner field in the North Sea has been a cornerstone in the study of aquifer CO<sub>2</sub> sequestration, with over 20 years of monitoring through time-lapse seismic analysis. This world-class project has provided critical insights into CO<sub>2</sub> storage by detecting anomalous events in seismic imagery, confirming CO<sub>2</sub> migration and stabilization within the subsurface. The study observed the growth of the CO<sub>2</sub> plume within the storage aquifer layer by analyzing the seismic amplitude differences between baseline and subsequent monitoring data. The availability of precise seismic datasets in the Sleipner Project has not only facilitated monitoring validation but also spurred further research into CO<sub>2</sub> quantification. This study focused on verifying the correlation between the amounts of stored CO<sub>2</sub> and seismic attributes. Reflection data previously acquired revealed seismic anomalies attributed to the subsurface CO<sub>2</sub> plume. The trace envelope attribute, which only registers positive values, was found to be particularly effective in delineating the primary boundary of the CO<sub>2</sub>-affected region. To advance quantitative monitoring, a new CO<sub>2</sub> indicator attribute was developed, derived from the trace envelope and similarity variance. The application of this attribute resulted in an improvement in regression estimation accuracy, increasing from 0.9895 to 0.9906. The successful matching of CO<sub>2</sub> storage data with seismic attributes demonstrates that fluid substitution can be quantitatively assessed using seismic data manipulation over time, underscoring the potential of seismic analysis for accurate CO<sub>2</sub> monitoring in subsurface storage projects.</p>
</abstract>
<kwd-group>
<kwd>CO<sub>2</sub> storage</kwd>
<kwd>quantitative monitoring</kwd>
<kwd>seismic attributes</kwd>
<kwd>Sleipner Project</kwd>
<kwd>CO<sub>2</sub> indicator</kwd>
</kwd-group>
<custom-meta-wrap>
<custom-meta>
<meta-name>section-at-acceptance</meta-name>
<meta-value>Georeservoirs</meta-value>
</custom-meta>
</custom-meta-wrap>
</article-meta>
</front>
<body>
<sec id="s1">
<title>1 Introduction</title>
<p>Carbon capture and storage (CCS) is an essential technique that requires continuous research to be beneficial in mitigating the climate crisis. The completion of storing CO<sub>2</sub> in a geological subsurface has been validated in an enhanced oil recovery field and an aquifer formation (<xref ref-type="bibr" rid="B28">Gozalpour et al., 2005</xref>; <xref ref-type="bibr" rid="B5">Bachu, 2015</xref>). CCS involves a challenging process requiring critical technological procedures, such as capturing at source, transportation, subsurface storage, and confirming stabilization (<xref ref-type="bibr" rid="B34">IPCC, 2005</xref>). Comprehensive offshore and onshore CCS projects have demonstrated the feasibility of storing millions of tons of carbon annually (<xref ref-type="bibr" rid="B31">Hannis et al., 2015</xref>; <xref ref-type="bibr" rid="B41">Rassool et al., 2020</xref>); however, monitoring this in the subsurface is crucial for public safety and social awareness (<xref ref-type="bibr" rid="B7">Benson et al., 2012</xref>; <xref ref-type="bibr" rid="B43">Romanak and Dixon, 2022</xref>). Regulations require detailed monitoring to confirm the need for stabilization of the injected CO<sub>2</sub>. Therefore, high-quality monitoring data are necessary to succeed in CCS projects.</p>
<p>The Sleipner Project provides a high-resolution, time-lapse seismic dataset for monitoring subsurface CO<sub>2</sub> (<xref ref-type="bibr" rid="B45">Sleipner 4D Seismic Dataset, 2020</xref>). This project is a large-scale demonstration of CCS on an aquifer formation that was monitored by time-lapse 2D and 3D seismic and historical matching analyses (<xref ref-type="bibr" rid="B4">Arts et al., 2003</xref>; <xref ref-type="bibr" rid="B14">Chadwick and Noy, 2010</xref>; <xref ref-type="bibr" rid="B12">Chadwick, 2013</xref>). Because the data are high quality, various applications in seismic analysis have contributed to the geology and geophysics research in this area. Thin layers were modeled and analyzed using the amplitude of the seismic wiggles corresponding to each CO<sub>2</sub> plume layer (<xref ref-type="bibr" rid="B8">Boait et al., 2012</xref>; <xref ref-type="bibr" rid="B50">Williams and Chadwick, 2012</xref>). Amplitude variation with offset was used to invert the geophysical properties from basic impedance to compressibility and shear compressibility (<xref ref-type="bibr" rid="B30">Haffinger et al., 2016</xref>; <xref ref-type="bibr" rid="B21">Dupuy et al., 2017a</xref>). The characteristics of high-quality seismic data made it possible to derive velocity information, which is difficult to calculate inside the CO<sub>2</sub> storage layer, in various ways (<xref ref-type="bibr" rid="B39">Raknes et al., 2015</xref>; <xref ref-type="bibr" rid="B17">Chadwick et al., 2019</xref>; <xref ref-type="bibr" rid="B19">Cho and June, 2021</xref>). The CO<sub>2</sub> storage volume divided into layers is becoming so specific that 4D inversion and simulated annealing are being attempted to overcome the thin-bed tuning effect and to quantify plume amount (<xref ref-type="bibr" rid="B33">Hema et al., 2024</xref>; <xref ref-type="bibr" rid="B35">Izadian, 2024</xref>). Subsurface characterization also estimates physical properties such as saturation, migration, and trapping of CO<sub>2</sub> at a fine scale in the Sleipner field (<xref ref-type="bibr" rid="B44">Rubino et al., 2011</xref>; <xref ref-type="bibr" rid="B25">Ghosh et al., 2015</xref>; <xref ref-type="bibr" rid="B2">Ahmadinia et al., 2020</xref>). To date, Sleipner data have been used in numerous geological and geophysical research projects.</p>
<p>The estimation of CO<sub>2</sub> boundaries and the volumes of CO<sub>2</sub> injected into the Sleipner reservoir are important for understanding Sleipner data. Compressibility and shear compliance have been proven to be more effective for describing CO<sub>2</sub> plumes than conventional impedance because they are more closely related to saturation (<xref ref-type="bibr" rid="B29">Haffinger et al., 2017</xref>). The boundary of the Sleipner CO<sub>2</sub> plume must be continuously updated for the simulation, which can markedly affect the quantification results (<xref ref-type="bibr" rid="B53">Zhu et al., 2015</xref>). An effective quantification method is to monitor CO<sub>2</sub> stored in the geologic storage using noble gases. For example, He/Ar isotopes have contributed significantly to the elucidation of the constraints of the crust and mantle (<xref ref-type="bibr" rid="B10">Buttitta et al., 2020</xref>). Introducing these geochemical methods to CCS studies will facilitate the tracking of CO<sub>2</sub> stabilization and migration (<xref ref-type="bibr" rid="B42">Roberts et al., 2017</xref>). An alternative method, if the tracer injection method cannot be applied, is to use the seismic data. Seismic attributes, a method for identifying plume boundaries, have been used to interpret a hydrocarbon reservoir by focusing on the amplitude of an anomaly event. The application of seismic attributes has evolved into a reservoir analysis technique (<xref ref-type="bibr" rid="B46">Taner et al., 1979</xref>; <xref ref-type="bibr" rid="B47">Taner et al., 1994</xref>). Some researchers have used advanced seismic attribute analysis to track fluid front movement so that it can be used to characterize and monitor reservoirs (<xref ref-type="bibr" rid="B18">Chen and Sidney, 1997</xref>; <xref ref-type="bibr" rid="B6">Behrens et al., 1998</xref>). The physical properties of rocks are major seismic attributes (<xref ref-type="bibr" rid="B32">Hart, 2002</xref>; <xref ref-type="bibr" rid="B26">Goloshubin et al., 2008</xref>), and although these attributes are easy to calculate and analyze, their utility should be handled with caution to avoid incorrect interpretation (<xref ref-type="bibr" rid="B20">Chopra and Marfurt, 2005</xref>; <xref ref-type="bibr" rid="B37">Marfurt and Alves, 2015</xref>). Regarding the advantages of seismic attributes, monitoring CO<sub>2</sub> in the subsurface would be improved by using a Sleipner time-lapse dataset to obtain more detail.</p>
<p>Here, we present a validation of whether specific attributes, rather than the seismic amplitudes from vintage surveys, are more effective at recognizing the plume boundary of subsurface CO<sub>2</sub>. For this purpose, we display an amplitude envelope to define the CO<sub>2</sub> plume boundaries using time-lapse data. Based on these boundaries, the area and volume of the CO<sub>2</sub> plume were calculated and correlated with the injected volume of CO<sub>2</sub>. To achieve a higher correlation, we combined conventional attributes and derived a new optimized seismic attribute. The time-lapse volumes calculated by the new attribute have an increased correlation value with the injected volume of CO<sub>2</sub>. The crossplot between the CO<sub>2</sub> plume volumes and the amount of injected CO<sub>2</sub> quantified the validation of the seismic attribute application in CCS assessment. The availability of a high-quality dataset motivates the application of seismic attribute analysis to match CO<sub>2</sub> amounts with time-lapse data.</p>
</sec>
<sec sec-type="methods" id="s2">
<title>2 Methodology</title>
<sec id="s2-1">
<title>2.1 Sleipner Project and time-lapse seismic data</title>
<p>The Sleipner Project is a demonstration of successful CCS for aquifer formation since the first CO<sub>2</sub> injection was implemented in October 1996. Located in the North Sea, the Sleipner field is associated with the Miocene&#x2013;Pliocene Utsira Formation, with an estimated 51.6 billion cubic meters of gas reserves in the adjacent area (<xref ref-type="fig" rid="F1">Figure 1</xref>). The Utsira Formation is a sand unit overlain by Pliocene shale. Internally, Utsira contains interlayered shale units (&#x223c;1 m thick) that show low permeability, which inhibits CO<sub>2</sub> flow, in contrast with a thick upper shale layer that may assist flow (<xref ref-type="bibr" rid="B55">Zweigel et al., 2004</xref>). The Sleipner reservoir is an open system with relatively well-known flow paths and active pressure dissipation mechanisms (e.g., lateral brine migration). In contrast, natural CO<sub>2</sub> and He accumulations form over millions of years in closed or semi-closed systems, where fluid movement is far more constrained. These systems are heavily influenced by caprock integrity, fault sealing, burial history, and diagenetic processes, all of which can profoundly affect gas migration and trapping. Various studies show that natural analogs exhibit behavior shaped by long-term lithological evolution and tectonic regimes, which means gases can accumulate as a function of temperature-dependent diffusion and trapping efficiency (<xref ref-type="bibr" rid="B10">Buttitta et al., 2020</xref>; <xref ref-type="bibr" rid="B9">Buttitta et al., 2023</xref>; <xref ref-type="bibr" rid="B27">Gori et al., 2023</xref>). Monitoring techniques, therefore, compensated for site-specific thermal, lithological, and structural conditions, and the Sleipner Project also conducted such studies (<xref ref-type="bibr" rid="B36">Karstens et al., 2017</xref>; <xref ref-type="bibr" rid="B38">Massarweh and Abushaikah, 2024</xref>).</p>
<fig id="F1" position="float">
<label>FIGURE 1</label>
<caption>
<p>Location map of Sleipner Project showing the Utsira formation extent (after <xref ref-type="bibr" rid="B3">Arts et al., 2008</xref>).</p>
</caption>
<graphic xlink:href="feart-13-1487480-g001.tif">
<alt-text content-type="machine-generated">Map showing parts of Norway and the UK with highlighted areas. The Sleipner Field is marked in yellow in the North Sea near Norway, and the Sn&#xF8;hvit Field is indicated by a red dot further north. The Utsira Formation is labeled near the Sleipner Field.</alt-text>
</graphic>
</fig>
<p>The Sleipner Project injected supercritical CO<sub>2</sub> at a depth of 1,012 m into the saline aquifer of the Utsira Formation Sandstone (<xref ref-type="bibr" rid="B3">Arts et al., 2008</xref>), which has a favorable porosity of 35%&#x2013;40% to store CO<sub>2</sub>, adequate for applying seismic monitoring techniques (<xref ref-type="bibr" rid="B23">Eiken et al., 2011</xref>). Under favorable conditions, CO<sub>2</sub> monitoring has been successful in the Sleipner Project (<xref ref-type="bibr" rid="B4">Arts et al., 2003</xref>; <xref ref-type="bibr" rid="B3">Arts et al., 2008</xref>; <xref ref-type="bibr" rid="B16">Chadwick et al., 2010</xref>). Additional quantitative analyses of time-lapse seismic data are ongoing using a wide-scope approach. Time-lapse seismic data, also known as 4D seismic imaging, represents a sophisticated geophysical monitoring technique that captures sequential seismic surveys of the same geological formation over multiple time intervals. This method enables the detection and quantification of subtle changes in subsurface characteristics, particularly crucial in CCS and hydrocarbon reservoir monitoring. The depth interval of CCS storage on time-lapse seismic data that includes some heterogeneities with thin layers is of particular interest for developing research that would be valuable to the post-injection stages (<xref ref-type="bibr" rid="B49">White et al., 2018a</xref>; <xref ref-type="bibr" rid="B35">Izadian, 2024</xref>).</p>
<p>Seven vintage seismic surveys were conducted, starting with a baseline survey in 1994 and continuing in 1999, 2001, 2004, 2006, 2008, and 2010 (<xref ref-type="bibr" rid="B24">Furre et al., 2017</xref>). Time-lapse data were released in January 2020 (<xref ref-type="bibr" rid="B45">Sleipner 4D Seismic Database, 2020</xref>), consisting of migrated volumes and velocity maps that can be converted into depth-domain data. The seismic volume and acquisition parameters used here are listed in <xref ref-type="table" rid="T1">Table 1</xref>, which shows consistency with the vintage surveys.</p>
<table-wrap id="T1" position="float">
<label>TABLE 1</label>
<caption>
<p>Survey data list and acquisition parameters.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Data name</th>
<th align="left">Baseline</th>
<th align="left">M99</th>
<th align="left">M01</th>
<th align="left">M04</th>
<th align="left">M06</th>
<th align="left">M08</th>
<th align="left">M10</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Acquisition year</td>
<td align="left">1994</td>
<td align="left">1998</td>
<td align="left">2001</td>
<td align="left">2004</td>
<td align="left">2006</td>
<td align="left">2008</td>
<td align="left">2010</td>
</tr>
<tr>
<td align="left">Shooting direction (degree)</td>
<td align="left">0.853</td>
<td align="left">0.853</td>
<td align="left">0.850</td>
<td align="left">90.00</td>
<td align="left">0.850</td>
<td align="left">0.850</td>
<td align="left">0.850</td>
</tr>
<tr>
<td align="left">Shot point interval (m)</td>
<td align="left">18.75</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">18.75</td>
<td align="left">18.75</td>
<td align="left">18.75</td>
<td align="left">12.5</td>
</tr>
<tr>
<td align="left">Group interval (m)</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
<td align="left">12.5</td>
</tr>
<tr>
<td align="left">Bin size acq. (m)</td>
<td align="left">6.25 &#xd7; 25</td>
<td align="left">6.25 &#xd7; 25</td>
<td align="left">6.25 &#xd7; 25</td>
<td align="left">6.25 &#xd7; 18.75</td>
<td align="left">6.25 &#xd7; 25</td>
<td align="left">6.25 &#xd7; 25</td>
<td align="left">6.25 &#xd7; 18.75</td>
</tr>
<tr>
<td align="left">Sample interval (ms)</td>
<td align="left">2</td>
<td align="left">2</td>
<td align="left">2</td>
<td align="left">2</td>
<td align="left">2</td>
<td align="left">2</td>
<td align="left">2</td>
</tr>
<tr>
<td align="left">Recording length (ms)</td>
<td align="left">5,500</td>
<td align="left">4,500</td>
<td align="left">4,500</td>
<td align="left">6,000</td>
<td align="left">6,000</td>
<td align="left">6,000</td>
<td align="left">4,608</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>All time-lapse seismic datasets show sufficient resolution to enable imaging of the amplitude difference from 4D processing (<xref ref-type="bibr" rid="B50">Williams and Chadwick, 2012</xref>). The bin size along the survey was 6.25 m and less than 25 m across, which enabled 4D seismic monitoring with a good resolution. The frequency range of seismic data is between 15 Hz and 55 Hz, centered at 35 Hz, with a tuning thickness of 14 ms in two-way travel time. This resolution enhances layer heterogeneity decomposition and derives confident velocity information (<xref ref-type="bibr" rid="B17">Chadwick et al., 2019</xref>). To further validate the seismic data, additional information contained in the seismic attributes was utilized to obtain more amplitude-varying features.</p>
</sec>
<sec id="s2-2">
<title>2.2 Attribute analysis and volume calculation</title>
<p>There are various seismic attributes in the Sleipner dataset. To analyze these, the IHS Kingdom&#x2122; Suite software was used, which provides intrinsic attributes in four categories: wavelet, instantaneous, geometric, and stratigraphic. Among the available attributes, the trace envelope (TE) is preferred for identifying CO<sub>2</sub> plumes. TE, also known as instantaneous amplitude, can be calculated using the absolute value of the function amplitude. It involves all positive values that may represent the individual interface contrast so that it can highlight anomalous regions.</p>
<p>When the original seismic trace <inline-formula id="inf1">
<mml:math id="m1">
<mml:mrow>
<mml:mi>f</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi>z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:math>
</inline-formula> is obtained, TE (<xref ref-type="disp-formula" rid="e1">Equation 1</xref>) can be written as<disp-formula id="e1">
<mml:math id="m2">
<mml:mrow>
<mml:mi mathvariant="bold-italic">T</mml:mi>
<mml:mi mathvariant="bold-italic">E</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mo>&#x3d;</mml:mo>
<mml:msqrt>
<mml:mrow>
<mml:msup>
<mml:mrow>
<mml:mfenced open="[" close="]" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">R</mml:mi>
<mml:mi mathvariant="bold-italic">e</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">f</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msup>
<mml:mo>&#x2b;</mml:mo>
<mml:msup>
<mml:mrow>
<mml:mfenced open="[" close="]" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">I</mml:mi>
<mml:mi mathvariant="bold-italic">m</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">f</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msup>
</mml:mrow>
</mml:msqrt>
</mml:mrow>
</mml:math>
<label>(1)</label>
</disp-formula>where <inline-formula id="inf2">
<mml:math id="m3">
<mml:mrow>
<mml:mi>R</mml:mi>
<mml:mi>e</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi>f</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi>z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:math>
</inline-formula> and <inline-formula id="inf3">
<mml:math id="m4">
<mml:mrow>
<mml:mi>I</mml:mi>
<mml:mi>m</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi>f</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi>z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:math>
</inline-formula> are the real and imaginary parts of the Hilbert transform of the seismic trace, respectively (<xref ref-type="bibr" rid="B46">Taner et al., 1979</xref>). Because TE has only a positive magnitude, a subtle polarity change in the spatial domain would be blurred or neglected. Instead, the amplitude differences near the CO<sub>2</sub> plume injection region were highlighted. We intend to design additional new attributes that should minimize amplitude changes in the background region and further maximize the effect of discriminating amplitude anomalies.</p>
<p>The similarity variance (SV) value is an additional attribute consistent with a similar lithology. If the interval is saturated with CO<sub>2</sub>, a similar interval is expected. Therefore, similarity (<xref ref-type="disp-formula" rid="e2">Equation 2</xref>) was used as a secondary attribute, expressed as shown below:<disp-formula id="e2">
<mml:math id="m5">
<mml:mrow>
<mml:mi mathvariant="bold-italic">S</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mo>&#x3d;</mml:mo>
<mml:mfrac>
<mml:mrow>
<mml:mstyle displaystyle="true">
<mml:msubsup>
<mml:mo>&#x2211;</mml:mo>
<mml:mrow>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mo>&#x2212;</mml:mo>
<mml:mi mathvariant="bold-italic">N</mml:mi>
<mml:mo>/</mml:mo>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:mrow>
<mml:mrow>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mi mathvariant="bold-italic">N</mml:mi>
<mml:mo>/</mml:mo>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:mrow>
</mml:msubsup>
</mml:mstyle>
<mml:msup>
<mml:mrow>
<mml:mfenced open="{" close="}" separators="|">
<mml:mrow>
<mml:mstyle displaystyle="true">
<mml:msubsup>
<mml:mo>&#x2211;</mml:mo>
<mml:mrow>
<mml:mi mathvariant="bold-italic">m</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mn mathvariant="bold">1</mml:mn>
</mml:mrow>
<mml:mi mathvariant="bold-italic">M</mml:mi>
</mml:msubsup>
</mml:mstyle>
<mml:mrow>
<mml:msub>
<mml:mi mathvariant="bold-italic">f</mml:mi>
<mml:mi mathvariant="bold-italic">m</mml:mi>
</mml:msub>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
<mml:mo>&#x2b;</mml:mo>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msup>
</mml:mrow>
<mml:mrow>
<mml:mstyle displaystyle="true">
<mml:msubsup>
<mml:mo>&#x2211;</mml:mo>
<mml:mrow>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mo>&#x2212;</mml:mo>
<mml:mi mathvariant="bold-italic">N</mml:mi>
<mml:mo>/</mml:mo>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:mrow>
<mml:mrow>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mi mathvariant="bold-italic">N</mml:mi>
<mml:mo>/</mml:mo>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:mrow>
</mml:msubsup>
</mml:mstyle>
<mml:mrow>
<mml:mstyle displaystyle="true">
<mml:msubsup>
<mml:mo>&#x2211;</mml:mo>
<mml:mrow>
<mml:mi mathvariant="bold-italic">m</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mn mathvariant="bold">1</mml:mn>
</mml:mrow>
<mml:mi mathvariant="bold-italic">M</mml:mi>
</mml:msubsup>
</mml:mstyle>
<mml:mrow>
<mml:msubsup>
<mml:mi mathvariant="bold-italic">f</mml:mi>
<mml:mi mathvariant="bold-italic">m</mml:mi>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msubsup>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
<mml:mo>&#x2b;</mml:mo>
<mml:mi mathvariant="bold-italic">&#x3c4;</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:mrow>
</mml:mrow>
</mml:mfrac>
</mml:mrow>
</mml:math>
<label>(2)</label>
</disp-formula>where f<sub>m</sub>(z) is the <italic>m</italic>th trace of the gather, N is the length of the computational window in both time and depth domains, and z represents either time or depth. This is also the calculation of semblance property, which represents a measure of the coherent power existing between several traces versus the total power of all traces. Next, the variance of similarity (<xref ref-type="disp-formula" rid="e3">Equation 3</xref>) was calculated:<disp-formula id="e3">
<mml:math id="m6">
<mml:mrow>
<mml:mi mathvariant="bold-italic">S</mml:mi>
<mml:mi mathvariant="bold-italic">V</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mi mathvariant="bold-italic">E</mml:mi>
<mml:mrow>
<mml:mfenced open="[" close="]" separators="|">
<mml:mrow>
<mml:msup>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">S</mml:mi>
<mml:mo>&#x2212;</mml:mo>
<mml:msub>
<mml:mi mathvariant="bold-italic">S</mml:mi>
<mml:mrow>
<mml:mi mathvariant="bold-italic">m</mml:mi>
<mml:mi mathvariant="bold-italic">e</mml:mi>
<mml:mi mathvariant="bold-italic">a</mml:mi>
<mml:mi mathvariant="bold-italic">n</mml:mi>
</mml:mrow>
</mml:msub>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msup>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
</mml:math>
<label>(3)</label>
</disp-formula>where S is the similarity, S<sub>mean</sub> is the mean value of S, and E is the expectation of S. Therefore, the SV calculated by the expected value of the squared deviation from the mean of similarity represents local anomalies with respect to the smoothed averaged background. By including the similarity variance in the exponential function so that a smaller SV represents a higher anomaly following high coherency events, the CO<sub>2</sub> plume region was easier to distinguish.</p>
<p>To merge the relative attributes into a new one, the data trend was inspected. The new attribute CO2IDC&#x2014;<italic>an indicator of carbon dioxide</italic>&#x2014;<xref ref-type="disp-formula" rid="e4">Equation 4</xref> was calculated as shown below:<disp-formula id="e4">
<mml:math id="m7">
<mml:mrow>
<mml:mi mathvariant="bold-italic">C</mml:mi>
<mml:mi mathvariant="bold-italic">O</mml:mi>
<mml:mn mathvariant="bold">2</mml:mn>
<mml:mi mathvariant="bold-italic">I</mml:mi>
<mml:mi mathvariant="bold-italic">D</mml:mi>
<mml:mi mathvariant="bold-italic">C</mml:mi>
<mml:mo>&#x3d;</mml:mo>
<mml:mi mathvariant="bold-italic">T</mml:mi>
<mml:mi mathvariant="bold-italic">E</mml:mi>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mi mathvariant="bold-italic">z</mml:mi>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
<mml:mo>&#xb7;</mml:mo>
<mml:msup>
<mml:mi mathvariant="bold-italic">e</mml:mi>
<mml:msup>
<mml:mrow>
<mml:mo>&#x2212;</mml:mo>
<mml:mrow>
<mml:mfenced open="(" close=")" separators="|">
<mml:mrow>
<mml:mfrac>
<mml:mrow>
<mml:mi mathvariant="bold-italic">S</mml:mi>
<mml:mi mathvariant="bold-italic">V</mml:mi>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:mfrac>
</mml:mrow>
</mml:mfenced>
</mml:mrow>
</mml:mrow>
<mml:mn mathvariant="bold">2</mml:mn>
</mml:msup>
</mml:msup>
</mml:mrow>
</mml:math>
<label>(4)</label>
</disp-formula>
</p>
<p>Here, CO2IDC is a property of the corrected TE obtained by adding the damping effect of the SV weighting to minimize the local variance from the plume area. We expect that CO2IDC can distinguish the CO<sub>2</sub> plume region from the TE. Using these attributes, we commenced matching by displaying the relevant vertical and horizontal sections with the vintage surveys. The plume area was then captured using a polygon boundary. The time-lapse plume area correlated with the amount of CO<sub>2</sub> injected into the Sleipner field. This is the first correlation of quantitative matching that uses two-dimensional interpretation results in the workflow (<xref ref-type="fig" rid="F2">Figure 2</xref>). The subsequent correlations are the matching amount of injected CO<sub>2</sub> with the three-dimensional plume volume interpreted by the attributes of TE and CO2IDC. The most important factor in determining these attributes is the area of the plume region interpreted on the seismic time-slice map. We calculated the area of the plume region by changing the moving width size in TE and SV computations, and the Sleipner data had a sensitivity of about 3% (<xref ref-type="table" rid="T2">Table 2</xref>). This value means that consistent plume area calculations are possible, and therefore, the method using CO2IDC would have robustness.</p>
<fig id="F2" position="float">
<label>FIGURE 2</label>
<caption>
<p>Flow chart on quantitative matching of CO<sub>2</sub> amount via seismic attributes.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g002.tif">
<alt-text content-type="machine-generated">Flowchart illustrating correlations between seismic data and CO2 metrics. Seismic Amplitude leads to Time-lapse CO2 plume Area, correlating with Time-lapse Amount of Injected CO2. Amplitude Envelope leads to Time-lapse CO2 plume volume, showing a similar correlation. CO2 Indicator also leads to Time-lapse CO2 plume volume and correlates with the amount of injected CO2.</alt-text>
</graphic>
</fig>
<table-wrap id="T2" position="float">
<label>TABLE 2</label>
<caption>
<p>Sensitivity analysis between the polygon selection and the moving window width.</p>
</caption>
<table>
<tbody valign="top">
<tr>
<td align="left">Width of moving window on TE (ms)</td>
<td align="center">14</td>
<td align="center">28</td>
<td align="center">56</td>
<td align="center">112</td>
</tr>
<tr>
<td align="left">Calculated area of the CO<sub>2</sub> plume (km<sup>2</sup>)</td>
<td align="center">2.26</td>
<td align="center">2.28</td>
<td align="center">2.22</td>
<td align="center">2.14</td>
</tr>
<tr>
<td align="left">Difference between area average and calculated value (%)</td>
<td align="center">1.57</td>
<td align="center">2.47</td>
<td align="center">0.22</td>
<td align="center">3.82</td>
</tr>
<tr>
<td align="left">Selected result on the TE map</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx1.tif"/>
</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx2.tif"/>
</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx3.tif"/>
</td>
<td align="left">
<inline-graphic xlink:href="feart-13-1487480-fx4.tif"/>
</td>
</tr>
<tr>
<td align="left">Width of moving window on SV (ms)</td>
<td align="center">14</td>
<td align="center">28</td>
<td align="center">56</td>
<td align="center">112</td>
</tr>
<tr>
<td align="left">Calculated area of CO<sub>2</sub> plume (km<sup>2</sup>)</td>
<td align="center">2.77</td>
<td align="center">2.86</td>
<td align="center">2.99</td>
<td align="center">2.81</td>
</tr>
<tr>
<td align="left">Difference between area average and calculated value (%)</td>
<td align="center">3.06</td>
<td align="center">0.09</td>
<td align="center">4.63</td>
<td align="center">1.66</td>
</tr>
<tr>
<td align="left">Selected result on the SV map</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx5.tif"/>
</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx6.tif"/>
</td>
<td align="center">
<inline-graphic xlink:href="feart-13-1487480-fx7.tif"/>
</td>
<td align="left">
<inline-graphic xlink:href="feart-13-1487480-fx8.tif"/>
</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>The spatial volume of the CO<sub>2</sub> plume was calculated from the two-dimensional interpretation results to input the quantitative matching. Previous studies using the Sleipner dataset have reported that the plume extends over nine layers (<xref ref-type="bibr" rid="B8">Boait et al., 2012</xref>; <xref ref-type="bibr" rid="B15">Chadwick and Noy, 2015</xref>). For volume calculation, the average value was used after calculating the volume of the area occupied by the polygons of the grid top and bottom layers, without separately calculating all layers for efficiency (<xref ref-type="fig" rid="F3">Figure 3</xref>). This method would be effective in excluding the influence of the thin-bed tuning effect that researchers are concerned about (<xref ref-type="bibr" rid="B35">Izadian, 2024</xref>). The plume area of top and bottom was computed by summation of polygons that can be assigned inner boundaries from plume top and bottom interpretation. To convert the time-domain seismic data into a spatial grid, the velocity map for each layer provided by the Sleipner Project was input (<xref ref-type="bibr" rid="B45">Sleipner 4D Seismic Dataset, 2020</xref>). A volume calculator in Kingdom&#x2122; was used to determine the volume of the polygon area occupied vertically by the top and bottom layers. In summary, the volume calculation method consists of calculating the area (top and bottom) boundary with a polygon, converting the time-domain seismic data into a space grid using a velocity map, and deriving the total plume&#x2019;s volume value. These operations were applied to polygons using TE and CO2IDC, and plume volumes were calculated for all seismic datasets for each acquisition period (Baseline, M99, M01, M04, M06, M08, and M10).</p>
<fig id="F3" position="float">
<label>FIGURE 3</label>
<caption>
<p>Volume calculation for the CO<sub>2</sub> plume region between the top and bottom layers.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g003.tif">
<alt-text content-type="machine-generated">Flowchart illustrating the calculation of CO2 plume volume. The process involves determining the top and bottom volumes using polygons and grids, labeled as &#x22;Polygon_top&#x22; and &#x22;Polygon_bottom,&#x22; producing &#x22;Volume_top&#x22; and &#x22;Volume_bottom.&#x22; An average volume is calculated using the formula &#x22;\((V_{top} &#x2b; V_{bottom}) / 2\),&#x22; leading to the final &#x22;Volume of CO2 plume.&#x22; The chart features visual elements of cylindrical shapes and mapped areas.</alt-text>
</graphic>
</fig>
</sec>
</sec>
<sec sec-type="results|discussion" id="s3">
<title>3 Results and discussion</title>
<sec id="s3-1">
<title>3.1 Matching CO<sub>2</sub> amount with primary seismic amplitude</title>
<p>The amount of injected CO<sub>2</sub> was matched against the plume area inferred from seismic data to validate the usage of primary seismic amplitude data. A seismic section is depicted at the inline, crossline vertical section, and time-slice on the horizontal map to compare the matching results. The area of CO<sub>2</sub> was determined via a manual selection of the plume boundary on the time-slice map. Then, a crossplot between the area and injected CO<sub>2</sub> volume was used to obtain a regression degree of fitting.</p>
<p>After loading seismic data, four horizons were interpreted: mean sea level, top sand wedge, and top and bottom Utsira Formation. The CO<sub>2</sub> plume lies between orange and green, as indicated in <xref ref-type="fig" rid="F4">Figure 4</xref>, where the interval between the top and bottom Utsira Formation is located. All seven vertical sections are depicted at inline 1830, close to the center of the survey area adjacent to the location of the injection point. In the baseline data, there was no anomaly between the orange and green horizons (<xref ref-type="fig" rid="F4">Figure 4a</xref>). As the amount of injected CO<sub>2</sub> increased, the anomalous event exhibited a CO<sub>2</sub> plume growth (<xref ref-type="fig" rid="F4">Figures 4b&#x2013;g</xref>). <xref ref-type="fig" rid="F4">Figure 4h</xref> shows the corresponding position in the map view.</p>
<fig id="F4" position="float">
<label>FIGURE 4</label>
<caption>
<p>Representative vertical sections in shooting directions with time-lapse seismic volumes: <bold>(a)</bold> baseline; <bold>(b)</bold> M99; <bold>(c)</bold> M01; <bold>(d)</bold> M04; <bold>(e)</bold> M06; <bold>(f)</bold> M08; <bold>(g)</bold> M10; <bold>(h)</bold> map view of the seismic line.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g004.tif">
<alt-text content-type="machine-generated">Seismic data visualizations showing eight panels labeled (a) to (h). Each panel consists of crossline versus time plots, with variations in color indicating different values. Color scales range from negative to positive values, with distinct horizontal lines marked in blue and green at various time intervals. Panel (h) is different, displaying an inline versus crossline plot with highlighted vertical sections in red and blue. Each panel provides a detailed underground structure analysis over a specified range.</alt-text>
</graphic>
</fig>
<p>The growth of the CO<sub>2</sub> plume can be clearly seen when displayed on a time-slice map. Depicted maps at 0.95 ms two-way travel time (TWTT)&#x2015;representing the depth of the top Utsira Formation&#x2015;were displayed and used to select the plume region (<xref ref-type="fig" rid="F5">Figure 5</xref>). The increase in the plume area with time-lapse on the map represents almost 1 million tons of CO<sub>2</sub> injected annually. The anomaly aspect is displayed in red and black, indicating negative and positive amplitude changes, respectively. The boundary of the anomalous area was selected on the time-slice map, and the area of the CO<sub>2</sub> plume was estimated.</p>
<fig id="F5" position="float">
<label>FIGURE 5</label>
<caption>
<p>Representative time-slice map at 0.950 ms travel time depth of time-lapse seismic volumes: <bold>(a)</bold> baseline; <bold>(b)</bold> M99; <bold>(c)</bold> M01; <bold>(d)</bold> M04; <bold>(e)</bold> M06; <bold>(f)</bold> M08; <bold>(g)</bold> M10; <bold>(h)</bold> seismic line of the baseline survey (left, <xref ref-type="fig" rid="F4">Figure 4a</xref>) and the M10 survey (right, <xref ref-type="fig" rid="F4">Figure 4g</xref>) in section view with arrows indicating the depth of the corresponding time-slices.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g005.tif">
<alt-text content-type="machine-generated">Six geological data maps labeled (a) to (g) display variations in red and black indicating geological features across inline and crossline sections. The color scale ranges from negative to positive values. Panel (h) shows two vertical seismic sections with a black arrow pointing between layers.</alt-text>
</graphic>
</fig>
<p>According to the <xref ref-type="bibr" rid="B45">Sleipner 4D Seismic Database (2020)</xref>, the amount of injected CO<sub>2</sub> is approximately one million tons per year. The cumulative amount of CO<sub>2</sub> is listed in <xref ref-type="table" rid="T3">Table 3</xref>. The area of the CO<sub>2</sub> plume boundary was calculated using the polygon tool in the time-slice map at 0.950 ms travel time depths and compared with the injected CO<sub>2</sub> amount. As indicated in <xref ref-type="fig" rid="F6">Figure 6</xref>, the crossplot shows a good correlation between CO<sub>2</sub> amount and the calculated area of the plume determined at the time-slice, proving that the Sleipner time-lapse dataset records the CO<sub>2</sub> plume growth quantitatively. As observed with seismic amplitude only, the CO<sub>2</sub> plume growth correlates with a CO<sub>2</sub> injection increase. The correlation is high (0.9895), as the amount of CO<sub>2</sub> is quite large, and the area expands over a large range.</p>
<table-wrap id="T3" position="float">
<label>TABLE 3</label>
<caption>
<p>Matching amount of CO<sub>2</sub> with plume area from the time-slice map at a depth of TWTT 0.95 ms.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Survey</th>
<th align="left">CO<sub>2</sub> amount (kt)</th>
<th align="left">Area of CO<sub>2</sub> plume (m<sup>2</sup>)</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Baseline</td>
<td align="left">0</td>
<td align="left">0</td>
</tr>
<tr>
<td align="left">M99</td>
<td align="left">2,303</td>
<td align="left">502,848</td>
</tr>
<tr>
<td align="left">M01</td>
<td align="left">4,210</td>
<td align="left">846,232</td>
</tr>
<tr>
<td align="left">M04</td>
<td align="left">6,909</td>
<td align="left">1,319,700</td>
</tr>
<tr>
<td align="left">M06</td>
<td align="left">8,414</td>
<td align="left">1,558,700</td>
</tr>
<tr>
<td align="left">M08</td>
<td align="left">10,383</td>
<td align="left">2,227,300</td>
</tr>
<tr>
<td align="left">M10</td>
<td align="left">12,080</td>
<td align="left">2,560,400</td>
</tr>
</tbody>
</table>
</table-wrap>
<fig id="F6" position="float">
<label>FIGURE 6</label>
<caption>
<p>Matching amount of CO<sub>2</sub> with CO<sub>2</sub> plume area calculated by the seismic reflection amplitude.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g006.tif">
<alt-text content-type="machine-generated">Scatter plot showing the correlation between the area of CO2 plume in thousand square meters on the x-axis and the amount of CO2 in kilotons on the y-axis. Data points form a linear pattern with a trend line and an R-squared value of 0.9895, indicating a strong positive correlation.</alt-text>
</graphic>
</fig>
<p>An injection volume proportional to the CO<sub>2</sub> plume area can be justified if the thickness is constant and there is no change in the upper and lower areas. In actual field conditions, the area where CO<sub>2</sub> spreads is different for each layer; therefore, more accurate matching is possible if this is considered. Because it is obvious that the volume of stored CO<sub>2</sub> increases as the injection amount increases, the assessment of the correlation must be precisely quantified with the upper and lower plume boundaries to perform accurate monitoring. Therefore, the correlation between secondary seismic attributes and the amount of CO<sub>2</sub> was quantified, particularly focusing on the discrimination of the lower CO<sub>2</sub> boundary, which is not clearly revealed on seismic amplitude.</p>
</sec>
<sec id="s3-2">
<title>3.2 Quantification of CO<sub>2</sub> by secondary seismic attributes</title>
<p>Although the primary seismic amplitude shows a clear image of the CO<sub>2</sub> plume in the Utsira Formation, the lower part of the plume has a smaller area, making recognition harder than the upper part of the plume boundary. To determine the volume of the CO<sub>2</sub> plume region, additional seismic attributes can help distinguish between anomalous regions with background storage formation.</p>
<p>The TE of the Sleipner seismic data represents all positive values at every time sample, especially the anomaly in yellow in <xref ref-type="fig" rid="F7">Figure 7</xref>, which shows an anomalous stored CO<sub>2</sub> region in the Utsira Formation. This facilitated the identification of the CO<sub>2</sub> plume in the vertical dimension. The visually observed CO<sub>2</sub> plume region was similar in the primary amplitude of the seismic data and in the secondary TE attribute data. To determine the plume volume in three dimensions, it was established that TE is advantageous for selecting the amplitude boundary on a time-slice map. To calculate the CO<sub>2</sub> plume volume, the average of two cylinders from the top and bottom selected layer boundaries was used (<xref ref-type="fig" rid="F8">Figure 8</xref>). The top of the Utsira Formation was selected at 0.950 ms TWTT on the TE map (<xref ref-type="fig" rid="F8">Figures 8a&#x2013;e</xref>), showing a similar boundary with seismic amplitude (<xref ref-type="fig" rid="F5">Figures 5b&#x2013;f</xref>). Interpretation of the bottom Utsira Formation shows less area as seen on amplitude selections from the CO<sub>2</sub> saturation region on the TE time-slice (<xref ref-type="fig" rid="F8">Figures 8f&#x2013;j</xref>).</p>
<fig id="F7" position="float">
<label>FIGURE 7</label>
<caption>
<p>Representative vertical sections of TE attributes in shooting directions with time-lapse seismic volumes: <bold>(a)</bold> baseline; <bold>(b)</bold> M99; <bold>(c)</bold> M01; <bold>(d)</bold> M04; <bold>(e)</bold> M06; <bold>(f)</bold> M08; <bold>(g)</bold> M10.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g007.tif">
<alt-text content-type="machine-generated">Seismic cross-section diagrams labeled (a) through (g) depict various subsurface layers overlaid with contour and color-coded amplitude data. Each diagram features time along the vertical axis and crossline numbers along the horizontal axis. The panels use a color scale indicating amplitudes, with detailed variations in the sediment layers.</alt-text>
</graphic>
</fig>
<fig id="F8" position="float">
<label>FIGURE 8</label>
<caption>
<p>Representative time-slice map of TE at 0.950 ms TWTT at the depth of the upper plume boundaries for <bold>(a)</bold> M99; <bold>(b)</bold> M01; <bold>(c)</bold> M04; <bold>(d)</bold> M06; <bold>(e)</bold> M08 data, and at 1.050 ms TWTT of the lower plume boundaries for <bold>(f)</bold> M99; <bold>(g)</bold> M01; <bold>(h)</bold> M04; <bold>(i)</bold> M06; <bold>(j)</bold> M08.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g008.tif">
<alt-text content-type="machine-generated">Ten panels labeled (a) to (j) show seismic data with overlays. Each panel contains a grid with crossline and inline axes from 1720 to 1960 and 950 to 1400 respectively. Panels (a) to (e) display a prominent yellow region with varying patterns and outlines, whereas panels (f) to (j) show smaller, diminishing yellow areas and blue outlines. The images illustrate changes in data interpretation or modeling.</alt-text>
</graphic>
</fig>
<p>The result of the matching between the plume volume calculated by TE and the injected amount of CO<sub>2</sub> is shown in <xref ref-type="table" rid="T4">Table 4</xref>. The regression value decreased from 0.9895 to 0.9690 as it was affected by the inaccurate selection of the bottom area (<xref ref-type="fig" rid="F9">Figure 9</xref>). This regression value is not unique because it is determined by a manually selected result for the upper and lower area boundaries. Obtaining an accurate selection method is dependent on the seismic resolution. With the Sleipner data, the resolution of the seismic volume is fairly good; thus, it is easy to select an anomalous event. However, in the case of a degraded time-lapse seismic dataset, it is difficult to select a CO<sub>2</sub> plume boundary that worsens the matching quality for monitoring CO<sub>2</sub>. The difficulties in determining the bottom Utsira Formation are consistent when the selection is made on the primary seismic amplitude. Thus, it is a major trigger for introducing additional attributes that represent the CO<sub>2</sub> plume region.</p>
<table-wrap id="T4" position="float">
<label>TABLE 4</label>
<caption>
<p>Matching CO<sub>2</sub> amount with volume calculated by TE attributes at a depth between time-slice maps at 0.95 ms and 1.05 ms.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Survey</th>
<th align="left">CO<sub>2</sub> amount (kt)</th>
<th align="left">Volume by upper area of CO<sub>2</sub> plume (m<sup>3</sup>)</th>
<th align="left">Volume by lower area of CO<sub>2</sub> plume (m<sup>3</sup>)</th>
<th align="left">Volume average (U &#x2b; L)/2</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Baseline</td>
<td align="left">0</td>
<td align="left">0</td>
<td align="left">0</td>
<td align="left">0</td>
</tr>
<tr>
<td align="left">M99</td>
<td align="left">2,303</td>
<td align="left">496.87</td>
<td align="left">353.30</td>
<td align="left">425.09</td>
</tr>
<tr>
<td align="left">M01</td>
<td align="left">4,210</td>
<td align="left">838.19</td>
<td align="left">76.70</td>
<td align="left">457.44</td>
</tr>
<tr>
<td align="left">M04</td>
<td align="left">6,909</td>
<td align="left">1,310.30</td>
<td align="left">127.78</td>
<td align="left">719.04</td>
</tr>
<tr>
<td align="left">M06</td>
<td align="left">8,414</td>
<td align="left">1,526.90</td>
<td align="left">50.00</td>
<td align="left">788.45</td>
</tr>
<tr>
<td align="left">M08</td>
<td align="left">10,383</td>
<td align="left">2,193.90</td>
<td align="left">34.89</td>
<td align="left">1,114.39</td>
</tr>
<tr>
<td align="left">M10</td>
<td align="left">12,080</td>
<td align="left">2,524.60</td>
<td align="left">26.24</td>
<td align="left">1,275.42</td>
</tr>
</tbody>
</table>
</table-wrap>
<fig id="F9" position="float">
<label>FIGURE 9</label>
<caption>
<p>Matching amount of CO<sub>2</sub> with the volume of the CO<sub>2</sub> plume region calculated by the TE attribute.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g009.tif">
<alt-text content-type="machine-generated">Scatter plot depicting the relationship between the volume of CO2 in million cubic meters and the amount of CO2 in kilotonnes. A dotted trend line shows a positive correlation, with an R-squared value of 0.969. Data points closely follow the line, suggesting a strong linear relationship.</alt-text>
</graphic>
</fig>
<p>As introduced previously, CO2IDC was calculated and displayed using the Sleipner dataset (<xref ref-type="fig" rid="F10">Figure 10</xref>). Because CO2IDC is calculated from the TE and weighted by the exponential value of SV, it is similar to the TE section. In the vertical section, CO2IDC can more easily differentiate the CO<sub>2</sub> plume anomaly from the background area because the signal amplitude is manipulated by TE and SV to maximize coherence.</p>
<fig id="F10" position="float">
<label>FIGURE 10</label>
<caption>
<p>Representative vertical sections of the CO2IDC attribute in shooting directions with time-lapse seismic volumes at <bold>(a)</bold> baseline, <bold>(b)</bold> M99; <bold>(c)</bold> M01; <bold>(d)</bold> M04; <bold>(e)</bold> M06; <bold>(f)</bold> M08; <bold>(g)</bold> M10.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g010.tif">
<alt-text content-type="machine-generated">Seven seismic crossline sections labeled (a) to (g). Each section displays time in milliseconds on the vertical axis and crossline numbers on the horizontal axis. The images feature layers in yellow, blue, and green against a black background, indicating variations in seismic reflections. Sections (b) to (g) emphasize different aspects of the seismic data, with varying levels of detail and noise.</alt-text>
</graphic>
</fig>
<p>The CO2IDC on the time-slice map shows the difference in the CO<sub>2</sub> plume region more clearly, making it easier to select the boundary. In particular, the lower boundary of the CO<sub>2</sub> plume was recognized with the background Utsira Formation (<xref ref-type="fig" rid="F11">Figure 11</xref>). This is an advantage of using the additional attribute of CO2IDC, which was specifically designed for the Sleipner dataset. The matching values between the injected CO<sub>2</sub> and the plume volume calculated by CO2IDC are listed in <xref ref-type="table" rid="T5">Table 5</xref>. The values of the CO<sub>2</sub> volumes, calculated by the lower layer cylinder, tend to be consistent, implying that the selection results of the boundary are robust along the time-lapse data. <xref ref-type="fig" rid="F12">Figure 12</xref> shows the crossplot of the matching result between the amount of CO<sub>2</sub> and plume volume as calculated by the CO2IDC. The regression value increased to 0.9906, indicating the validity of the attribute manipulation.</p>
<fig id="F11" position="float">
<label>FIGURE 11</label>
<caption>
<p>Representative time-slice map of CO2IDC at 0.950 ms travel time depth of seismic volumes: <bold>(a)</bold> M99; <bold>(b)</bold> M01; <bold>(c)</bold> M04; <bold>(d)</bold> M06; <bold>(e)</bold> M08, and at 1.050 ms <bold>(f)</bold> M99; <bold>(g)</bold> M01; <bold>(h)</bold> M04; <bold>(i)</bold> M06; <bold>(j)</bold> M08.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g011.tif">
<alt-text content-type="machine-generated">Ten panels labeled (a) to (j) show seismic data representations with inline and crossline axes. Each panel displays varying sizes and shapes of yellow regions on a black background, indicating geological features. Panels (a) to (e) have larger yellow regions compared to panels (f) to (j), which show smaller and fewer yellow areas, with some green spots present.</alt-text>
</graphic>
</fig>
<table-wrap id="T5" position="float">
<label>TABLE 5</label>
<caption>
<p>Matching CO<sub>2</sub> amount with volume calculated by CO2IDC.</p>
</caption>
<table>
<thead valign="top">
<tr>
<th align="left">Survey</th>
<th align="left">CO<sub>2</sub> amount (kt)</th>
<th align="left">Upper limit (m<sup>3</sup>)</th>
<th align="left">Lower limit (m<sup>3</sup>)</th>
<th align="left">Average (m<sup>3</sup>)</th>
</tr>
</thead>
<tbody valign="top">
<tr>
<td align="left">Baseline</td>
<td align="left">0</td>
<td align="left">0</td>
<td align="left">0</td>
<td align="left">0</td>
</tr>
<tr>
<td align="left">M99</td>
<td align="left">2,303</td>
<td align="left">451.53</td>
<td align="left">314.00</td>
<td align="left">382.76</td>
</tr>
<tr>
<td align="left">M01</td>
<td align="left">4,210</td>
<td align="left">891.37</td>
<td align="left">276.67</td>
<td align="left">584.02</td>
</tr>
<tr>
<td align="left">M04</td>
<td align="left">6,909</td>
<td align="left">1,401.17</td>
<td align="left">324.08</td>
<td align="left">862.63</td>
</tr>
<tr>
<td align="left">M06</td>
<td align="left">8,414</td>
<td align="left">1701.36</td>
<td align="left">493.54</td>
<td align="left">1,097.45</td>
</tr>
<tr>
<td align="left">M08</td>
<td align="left">10,383</td>
<td align="left">1981.02</td>
<td align="left">437.43</td>
<td align="left">1,209.22</td>
</tr>
<tr>
<td align="left">M10</td>
<td align="left">12,080</td>
<td align="left">2,285.54</td>
<td align="left">625.94</td>
<td align="left">1,455.75</td>
</tr>
</tbody>
</table>
</table-wrap>
<fig id="F12" position="float">
<label>FIGURE 12</label>
<caption>
<p>Matching amount of CO<sub>2</sub> with the volume of the CO<sub>2</sub> plume region as calculated by the CO2IDC attribute.</p>
</caption>
<graphic xlink:href="feart-13-1487480-g012.tif">
<alt-text content-type="machine-generated">Scatter plot showing a positive linear relationship between the volume of CO2 by CO2IDC in million cubic meters and the amount of CO2 in kilotons. The R-squared value of 0.9906 indicates a strong correlation, with data points closely following the dotted trend line.</alt-text>
</graphic>
</fig>
</sec>
<sec id="s3-3">
<title>3.3 Discussion</title>
<p>We selected a high-resolution seismic dataset released by the Sleipner Project that provides the best quality time-lapse seismic data. The data show an anomaly that is sufficiently large to detect CO<sub>2</sub> qualitatively and has been proven by previous researchers (e.g., <xref ref-type="bibr" rid="B3">Arts et al., 2008</xref>; <xref ref-type="bibr" rid="B24">Furre et al., 2017</xref>). Previous work has confirmed the feasibility of quantifying injected CO<sub>2</sub> with respect to seismic data, showing that anomalous amplitude is related to the amount of CO<sub>2</sub>, especially via layers on seismic images (<xref ref-type="bibr" rid="B13">Chadwick et al., 2009</xref>; <xref ref-type="bibr" rid="B16">Chadwick et al., 2010</xref>). CO<sub>2</sub> saturation is evaluated on a subsequent study utilizing seismic and rock physics inversion (<xref ref-type="bibr" rid="B22">Dupuy et al., 2017b</xref>). This quantification through inversion determined the CO<sub>2</sub> saturation with high accuracy, and such efforts will be repeated using time-lapse data. The pre-stack inverted impedance also showed highly reliable results for CO<sub>2</sub> saturation (<xref ref-type="bibr" rid="B40">Rasolofosaon and Dubos-Sallee, 2010</xref>). The method used here is merit worthy as it is less time-consuming than other methods, such as seismic inversion. More possibilities remain to be quantified, including monitoring issues dealing with history matching with CO<sub>2</sub> amounts (<xref ref-type="bibr" rid="B51">Williams and Chadwick, 2017</xref>; <xref ref-type="bibr" rid="B48">White et al., 2018b</xref>). Conventional studies of history matching focus on well log data that are direct and accurate but make limited use of seismic data (<xref ref-type="bibr" rid="B52">Yin et al., 2019</xref>; <xref ref-type="bibr" rid="B1">Ahmadinia and Shariatipour, 2020</xref>).</p>
<p>From another viewpoint, we accept seismic attributes to determine the feasibility of historical matching with seismic data in the case of a limited availability of well logs. A seismic attribute is a standalone piece of information that can provide physical properties with high confidence and degree of freedom. However, the selection of an attribute is based on a data evaluation. In this case, the amount of CO<sub>2</sub> is large; thus, the correlation of matching should be measured accurately. Building a new attribute is necessary to enhance time-lapse seismic data utilization, for example, to address pressure changes or to monitor porosity. Because the growth of the plume is not always consistent with the seismic interpretation, the detailed relationship between seismic signals and fluid substitution should be investigated.</p>
<p>In particular, stored CO<sub>2</sub> is a fluid, so it can migrate over time, and especially in the case of faults, it must be monitored with fluid migration mechanisms. The flow of CO<sub>2</sub> along complex strata and fracture zones is partially tracked in time-lapse seismic studies, and the CO2IDC presented in this study was introduced to confirm this more easily. However, it is desirable to utilize geochemical tracer studies as a method to directly and reliably track the flow of fluid (<xref ref-type="bibr" rid="B10">Buttitta et al., 2020</xref>; <xref ref-type="bibr" rid="B11">Caracausi et al., 2022</xref>). These methods have the advantage of being able to identify detailed fluid flow when included in the design process of a CCS project. It is also a method that can be applied cost-effectively compared to repeated seismic surveys. In case of geophysical data only, our method verifies CO<sub>2</sub> accommodation with attributes that were already confirmed with a slowly migrating plume without large-scale faults on the Sleipner data that were already published.</p>
<p>In time-slices corresponding to 1.05 ms of CO2IDC in the M04, M06, and M08 data, we identified a separated plume area boundary corresponding to a reported chimney event (<xref ref-type="bibr" rid="B36">Karstens et al., 2017</xref>; <xref ref-type="bibr" rid="B51">Williams and Chadwick, 2017</xref>). With only the seismic amplitude, the CO<sub>2</sub> charged region was ambiguous because of positive and negative wiggling. This study proves that the specific interest in stored CO<sub>2</sub> plumes can be investigated more easily by designing seismic attributes. However, there remains a validation limitation when challenging data are available. Because the present CO2IDC was designed by empirical determination, engaging other datasets would require a different damping value. In particular, when monitoring using seismic attributes is applied to heterogeneous, faulted, or fluid-rich geological domains, additional background information such as geochemical or geological interpretation should be utilized (<xref ref-type="bibr" rid="B9">Buttitta et al., 2023</xref>; <xref ref-type="bibr" rid="B54">Zummo et al., 2024</xref>). If experiences and case studies on various datasets accumulate, it will be possible to convert and standardize such information into quantifiable attributes. If active technologies such as machine learning, which have been in the spotlight recently, are utilized, the feasibility of the application will be secured more easily. Future studies may focus on the robust selection of attributes, regardless of data characteristics. If we achieve non-biased data analysis, the result of manipulating attributes for quantifying subsurfaces can be used across other disciplines, such as in monitoring aquifer pressure change, in addition to the CCS field.</p>
</sec>
</sec>
<sec sec-type="conclusion" id="s4">
<title>4 Conclusion</title>
<p>Here, we analyzed a seismic attribute that can monitor CO<sub>2</sub> amounts more effectively than the seismic amplitude itself. The trace envelope (TE) showed the CO<sub>2</sub> plume region clearly with respect to time. The advantage of using a TE is that it has all positive values; therefore, it instinctively describes the plume boundary. The plume volume was estimated from the TE and was positively correlated with the amount of CO<sub>2</sub> injected into the Utsira Formation. To improve the correlation between the injected CO<sub>2</sub> amount and volume by seismic aspect, we designed a new CO<sub>2</sub> indicator attribute based on the TE and similarity variance. The attribute of the CO<sub>2</sub> indicator discriminated the CO<sub>2</sub> saturated region qualitatively. The regression value increase in the correlation between the CO<sub>2</sub> amount and volume calculated by CO2IDC proves that seismic attributes can be used to monitor CO<sub>2</sub> for efficient CCS. Attributes analysis with a time-lapse scale can enhance the usage of Sleipner data and promote more intense research for CCS in general.</p>
</sec>
</body>
<back>
<sec sec-type="data-availability" id="s5">
<title>Data availability statement</title>
<p>Publicly available datasets were analyzed in this study. These data can be found here: <ext-link ext-link-type="uri" xlink:href="https://co2datashare.org/dataset">https://co2datashare.org/dataset</ext-link>.</p>
</sec>
<sec sec-type="author-contributions" id="s6">
<title>Author contributions</title>
<p>SC: Conceptualization, Data curation, Methodology, Writing &#x2013; original draft, Writing &#x2013; review and editing. SY: Formal analysis, Supervision, Writing &#x2013; review and editing. VS: Conceptualization, Writing &#x2013; review and editing.</p>
</sec>
<sec sec-type="funding-information" id="s7">
<title>Funding</title>
<p>The author(s) declare that financial support was received for the research and/or publication of this article. &#x201c;Technology development for storage efficiency improvement and safety assessment of CO<sub>2</sub> geological storage (24-3413)&#x201d; and &#x201c;Development of offshore CO<sub>2</sub> monitoring technology and transboundary CCUS business models through participation in Australian project (24-4863)&#x201d; at the Korea Institute of Geoscience and Mineral Resources (KIGAM).</p>
</sec>
<ack>
<p>The authors would like to thank reviewers for taking the time and effort necessary to review the manuscript.</p>
</ack>
<sec sec-type="COI-statement" id="s8">
<title>Conflict of interest</title>
<p>The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.</p>
</sec>
<sec sec-type="disclaimer" id="s9">
<title>Publisher&#x2019;s note</title>
<p>All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.</p>
</sec>
<ref-list>
<title>References</title>
<ref id="B1">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ahmadinia</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Shariatipour</surname>
<given-names>S. M.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Analysing the role of caprock morphology on history matching of Sleipner CO<sub>2</sub> plume using an optimisation method</article-title>. <source>Greenh. Gases Sci. Technol.</source> <volume>10</volume>, <fpage>1077</fpage>&#x2013;<lpage>1097</lpage>. <pub-id pub-id-type="doi">10.1002/ghg.2027</pub-id>
</citation>
</ref>
<ref id="B2">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ahmadinia</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Shariatipour</surname>
<given-names>S. M.</given-names>
</name>
<name>
<surname>Andersen</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Nobakht</surname>
<given-names>B.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Quantitative evaluation of the joint effect of uncertain parameters in CO<sub>2</sub> storage in the Sleipner project, using data-driven models</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>103</volume>, <fpage>103180</fpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2020.103180</pub-id>
</citation>
</ref>
<ref id="B3">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Arts</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Eiken</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Thibeau</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Nooner</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>Ten years&#x2019; experience of monitoring CO<sub>2</sub> injection in the Utsira Sand at Sleipner, offshore Norway</article-title>. <source>First Break</source> <volume>26</volume>, <fpage>65</fpage>&#x2013;<lpage>72</lpage>. <pub-id pub-id-type="doi">10.3997/1365-2397.26.1115.27807</pub-id>
</citation>
</ref>
<ref id="B4">
<citation citation-type="confproc">
<person-group person-group-type="author">
<name>
<surname>Arts</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Eiken</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Zweigel</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>van der Meer</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Zinszner</surname>
<given-names>B.</given-names>
</name>
</person-group> (<year>2003</year>). &#x201c;<article-title>Monitoring of CO<sub>2</sub> injected at Sleipner using time lapse seismic data</article-title>,&#x201d; in <conf-name>Proceedings of the 6th International Conference on Greenhouse Gas Control</conf-name>, <conf-loc>Kyoto, Japan</conf-loc>, <conf-date>October 1&#x2013;4</conf-date>.</citation>
</ref>
<ref id="B5">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Bachu</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Review of CO<sub>2</sub> storage efficiency in deep saline aquifers</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>40</volume>, <fpage>188</fpage>&#x2013;<lpage>202</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2015.01.007</pub-id>
</citation>
</ref>
<ref id="B6">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Behrens</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>MacLeod</surname>
<given-names>M. K.</given-names>
</name>
<name>
<surname>Tran</surname>
<given-names>T. T.</given-names>
</name>
<name>
<surname>Alimi</surname>
<given-names>A. O.</given-names>
</name>
</person-group> (<year>1998</year>). <article-title>Incorporating seismic attribute maps in 3D reservoir models</article-title>. <source>SPE Reserv. Eval. &#x26; Eng.</source> <volume>1</volume>, <fpage>122</fpage>&#x2013;<lpage>126</lpage>. <pub-id pub-id-type="doi">10.2118/36499-pa</pub-id>
</citation>
</ref>
<ref id="B7">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Benson</surname>
<given-names>S. M.</given-names>
</name>
<name>
<surname>Bennaceur</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Cook</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Davison</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>de Coninck</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Farhat</surname>
<given-names>K.</given-names>
</name>
<etal/>
</person-group> (<year>2012</year>). &#x201c;<article-title>Carbon capture and storage</article-title>,&#x201d; in <source>Global Energy assessment- toward a sustainable future</source>, <volume>993</volume>. <publisher-loc>Cambridge, United Kingdom</publisher-loc>: <publisher-name>Cambridge University Press</publisher-name>.</citation>
</ref>
<ref id="B8">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Boait</surname>
<given-names>F. C.</given-names>
</name>
<name>
<surname>White</surname>
<given-names>N. J.</given-names>
</name>
<name>
<surname>Bickle</surname>
<given-names>M. J.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Neufeld</surname>
<given-names>J. A.</given-names>
</name>
<name>
<surname>Huppert</surname>
<given-names>H. E.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Spatial and temporal evolution of injected CO2 at the Sleipner field, North Sea</article-title>. <source>J. Geophys. Res.</source> <volume>117</volume>, <fpage>B03309</fpage>. <pub-id pub-id-type="doi">10.1029/2011JB008603</pub-id>
</citation>
</ref>
<ref id="B9">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Buttitta</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Capasso</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Paternoster</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Barberio</surname>
<given-names>M. D.</given-names>
</name>
<name>
<surname>Gori</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Petitta</surname>
<given-names>M.</given-names>
</name>
<etal/>
</person-group> (<year>2023</year>). <article-title>Regulation of deep carbon degassing by gas-rock-water interactions in a seismic region of Southern Italy</article-title>. <source>Sci. Total Environ.</source> <volume>897</volume>, <fpage>165367</fpage>. <pub-id pub-id-type="doi">10.1016/j.scitotenv.2023.165367</pub-id>
</citation>
</ref>
<ref id="B10">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Buttitta</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Caracausi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Chiaraluce</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Favara</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Gasparo Morticelli</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Sulli</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Continental degassing of helium in an active tectonic setting (northern Italy): the role of seismicity</article-title>. <source>Sci. Rep.</source> <volume>10</volume> (<issue>1</issue>), <fpage>162</fpage>. <pub-id pub-id-type="doi">10.1038/s41598-019-55678-7</pub-id>
</citation>
</ref>
<ref id="B11">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Caracausi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Buttitta</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Picozzi</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Paternoster</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Stabile</surname>
<given-names>T. A.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Earthquakes control the impulsive nature of crustal helium degassing to the atmosphere</article-title>. <source>Commun. Earth &#x26; Environ.</source> <volume>3</volume> (<issue>1</issue>), <fpage>224</fpage>. <pub-id pub-id-type="doi">10.1038/s43247-022-00549-9</pub-id>
</citation>
</ref>
<ref id="B12">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
</person-group> (<year>2013</year>). &#x201c;<article-title>Offshore CO<sub>2</sub> storage: Sleipner natural gas field beneath the North Sea</article-title>,&#x201d; in <source>Geological storage of carbon dioxide. CO<sub>2</sub>
</source> (<publisher-loc>Amsterdam, Netherlands</publisher-loc>: <publisher-name>Elsevier</publisher-name>), <fpage>227</fpage>&#x2013;<lpage>253e</lpage>. <pub-id pub-id-type="doi">10.1533/9780857097279.3.227</pub-id>
</citation>
</ref>
<ref id="B13">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Noy</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Arts</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Eiken</surname>
<given-names>O.</given-names>
</name>
</person-group> (<year>2009</year>). <article-title>Latest time-lapse seismic datafrom Sleipner yield new insights into CO<sub>2</sub> plume development</article-title>. <source>Energy Procedia</source> <volume>1</volume>, <fpage>2103</fpage>&#x2013;<lpage>2110</lpage>. <pub-id pub-id-type="doi">10.1016/j.egypro.2009.01.274</pub-id>
</citation>
</ref>
<ref id="B14">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Noy</surname>
<given-names>D. J.</given-names>
</name>
</person-group> (<year>2010</year>). <article-title>History matching flow simulations and time-lapse seismic data from the Sleipner CO<sub>2</sub> plume</article-title>. <source>Pet. Geol. Conf. Ser.</source> <volume>7</volume>, <fpage>1171</fpage>&#x2013;<lpage>1182</lpage>. <pub-id pub-id-type="doi">10.1144/0071171</pub-id>
</citation>
</ref>
<ref id="B15">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Noy</surname>
<given-names>D. J.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Underground CO<sub>2</sub> storage: demonstrating regulatory conformance by convergence of history-matched modeled and observed CO<sub>2</sub> plume behavior using Sleipner time-lapse seismics</article-title>. <source>Greenh. Gases Sci. Technol.</source> <volume>5</volume>, <fpage>305</fpage>&#x2013;<lpage>322</lpage>. <pub-id pub-id-type="doi">10.1002/ghg.1488</pub-id>
</citation>
</ref>
<ref id="B16">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Williams</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Delepine</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Clochard</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Labat</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Sturton</surname>
<given-names>S.</given-names>
</name>
<etal/>
</person-group> (<year>2010</year>). <article-title>Quantitative analysis of time-lapse seismic monitoring data at the Sleipner CO<sub>2</sub> storage operation</article-title>. <source>Lead. Edge</source> <volume>29</volume>, <fpage>170</fpage>&#x2013;<lpage>177</lpage>. <pub-id pub-id-type="doi">10.1190/1.3304820</pub-id>
</citation>
</ref>
<ref id="B17">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
<name>
<surname>Williams</surname>
<given-names>G. A.</given-names>
</name>
<name>
<surname>Falcon-Suarez</surname>
<given-names>I.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Forensic mapping of seismic velocity heterogeneity in a CO<sub>2</sub> layer at the Sleipner CO<sub>2</sub> storage operation, North Sea, using time-lapse seismics</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>90</volume>, <fpage>102793</fpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2019.102793</pub-id>
</citation>
</ref>
<ref id="B18">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chen</surname>
<given-names>Q.</given-names>
</name>
<name>
<surname>Sidney</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>1997</year>). <article-title>Seismic attribute technology for reservoir forecasting and monitoring</article-title>. <source>Lead. Edge</source> <volume>16</volume>, <fpage>445</fpage>&#x2013;<lpage>448</lpage>. <pub-id pub-id-type="doi">10.1190/1.1437657</pub-id>
</citation>
</ref>
<ref id="B19">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Cho</surname>
<given-names>Y.</given-names>
</name>
<name>
<surname>Jun</surname>
<given-names>H.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Estimation and uncertainty analysis of the CO<sub>2</sub> storage volume in the Sleipner field via 4D reversible-jump markov-chain Monte Carlo</article-title>. <source>J. Petroleum Sci. Eng.</source> <volume>200</volume>, <fpage>108333</fpage>. <pub-id pub-id-type="doi">10.1016/j.petrol.2020.108333</pub-id>
</citation>
</ref>
<ref id="B20">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chopra</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Marfurt</surname>
<given-names>K. J.</given-names>
</name>
</person-group> (<year>2005</year>). <article-title>Seismic attributes- A historical perspective</article-title>. <source>Geophysics</source> <volume>70</volume>, <fpage>3SO</fpage>&#x2013;<lpage>28SO</lpage>. <pub-id pub-id-type="doi">10.1190/1.2098670</pub-id>
</citation>
</ref>
<ref id="B21">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Dupuy</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Romdhane</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Eliasson</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Querendez</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Yan</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Torres</surname>
<given-names>V. A.</given-names>
</name>
<etal/>
</person-group> (<year>2017a</year>). <article-title>Quantitative seismic characterization of CO<sub>2</sub> at the Sleipner storage site, North Sea</article-title>. <source>Interpretation</source> <volume>5</volume>, <fpage>SS23</fpage>&#x2013;<lpage>SS42</lpage>. <pub-id pub-id-type="doi">10.1190/int-2017-0013.1</pub-id>
</citation>
</ref>
<ref id="B22">
<citation citation-type="confproc">
<person-group person-group-type="author">
<name>
<surname>Dupuy</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Torres C</surname>
<given-names>V. A.</given-names>
</name>
<name>
<surname>Ghaderi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Querendez</surname>
<given-names>E.</given-names>
</name>
<name>
<surname>Mezyk</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2017b</year>). &#x201c;<article-title>Constrained AVO for CO<sub>2</sub> storage monitoring at Sleipner</article-title>,&#x201d; in <conf-name>Proceedings of the 13th International Conference on Greenhouse Gas Control</conf-name>, <conf-loc>Lausanne, Switzerland</conf-loc>, <conf-date>November 14&#x2013;18</conf-date>.</citation>
</ref>
<ref id="B23">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Eiken</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Ringrose</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Hermanrud</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Nazarian</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Torp</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>Hoier</surname>
<given-names>L.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Lessons learned from 14 years of CCS operations: Sleipner, in Salah and Snohvit</article-title>. <source>Energy Procedia</source> <volume>4</volume>, <fpage>5541</fpage>&#x2013;<lpage>5548</lpage>. <pub-id pub-id-type="doi">10.1016/j.egypro.2011.02.541</pub-id>
</citation>
</ref>
<ref id="B24">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Furre</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Eiken</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Alnes</surname>
<given-names>H.</given-names>
</name>
<name>
<surname>Vevatne</surname>
<given-names>J. N.</given-names>
</name>
<name>
<surname>Kiaer</surname>
<given-names>A. F.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>20 years of monitoring CO2-injection at Sleipner</article-title>. <source>Energy Procedia</source> <volume>114</volume>, <fpage>3916</fpage>&#x2013;<lpage>3926</lpage>. <pub-id pub-id-type="doi">10.1016/j.egypro.2017.03.1523</pub-id>
</citation>
</ref>
<ref id="B25">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ghosh</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Sen</surname>
<given-names>M. K.</given-names>
</name>
<name>
<surname>Vedanti</surname>
<given-names>N.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Quantitative interpretation of CO<sub>2</sub> plume from Sleipner (North Sea), using post-stack inversion and rock physics modeling</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>32</volume>, <fpage>147</fpage>&#x2013;<lpage>158</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2014.11.002</pub-id>
</citation>
</ref>
<ref id="B26">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Goloshubin</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Silin</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Vingalov</surname>
<given-names>V.</given-names>
</name>
<name>
<surname>Takkand</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Latfullin</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>Reservoir permeability from seismic attribute analysis</article-title>. <source>Lead. Edge</source> <volume>27</volume> (<issue>3</issue>), <fpage>376</fpage>&#x2013;<lpage>381</lpage>. <pub-id pub-id-type="doi">10.1190/1.2896629</pub-id>
</citation>
</ref>
<ref id="B27">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gori</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Paternoster</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Barbieri</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Buttitta</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Caracausi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Parente</surname>
<given-names>F.</given-names>
</name>
<etal/>
</person-group> (<year>2023</year>). <article-title>Hydrogeochemical multi-component approach to assess fluids upwelling and mixing in shallow carbonate-evaporitic aquifers (Contursi area, southern Apennines, Italy)</article-title>. <source>J. Hydrology</source> <volume>618</volume>, <fpage>129258</fpage>. <pub-id pub-id-type="doi">10.1016/j.jhydrol.2023.129258</pub-id>
</citation>
</ref>
<ref id="B28">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Gozalpour</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Ren</surname>
<given-names>S. R.</given-names>
</name>
<name>
<surname>Tohidi</surname>
<given-names>B.</given-names>
</name>
</person-group> (<year>2005</year>). <article-title>CO<sub>2</sub> EOR and storage in oil reservoirs</article-title>. <source>Oil &#x26; Gas Sci. Technol.</source> <volume>60</volume>, <fpage>537</fpage>&#x2013;<lpage>546</lpage>.</citation>
</ref>
<ref id="B29">
<citation citation-type="confproc">
<person-group person-group-type="author">
<name>
<surname>Haffinger</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Doulgeris</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Gisolf</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2017</year>). &#x201c;<article-title>Quantitative seismic reservoir monitoring by using a wave-equation based AVO technology</article-title>,&#x201d; in <conf-name>1st EAGE Workshop on Practical Reservoir Monitoring</conf-name>, <conf-loc>Amsterdam, Netherlands</conf-loc>, <conf-date>March 06&#x2013;09</conf-date>.</citation>
</ref>
<ref id="B30">
<citation citation-type="confproc">
<person-group person-group-type="author">
<name>
<surname>Haffinger</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Eyvazi</surname>
<given-names>F. J.</given-names>
</name>
<name>
<surname>Steeghs</surname>
<given-names>T. P. H.</given-names>
</name>
<name>
<surname>Doulgeris</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Gisolf</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2016</year>). &#x201c;<article-title>Quantitative prediction of injected CO<sub>2</sub> at Sleipner using wave-equation based AVO</article-title>,&#x201d; in <conf-name>Proceedings of 78th EAGE Conference and exhibition</conf-name>, <conf-loc>Vienna, Austria</conf-loc>, <conf-date>May 30&#x2013;June 2</conf-date>.</citation>
</ref>
<ref id="B31">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Hannis</surname>
<given-names>S.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Pearce</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Jones</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>White</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Wright</surname>
<given-names>I.</given-names>
</name>
<etal/>
</person-group> (<year>2015</year>). <source>Review of offshore monitoring for CCS Projects</source>. <publisher-loc>Cheltenham, UK</publisher-loc>: <publisher-name>IEAGHG</publisher-name>.</citation>
</ref>
<ref id="B32">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Hart</surname>
<given-names>B. S.</given-names>
</name>
</person-group> (<year>2002</year>). <article-title>Validating seismic attribute studies: beyond statistics</article-title>. <source>Lead. Edge</source> <volume>21</volume>, <fpage>1016</fpage>&#x2013;<lpage>1021</lpage>. <pub-id pub-id-type="doi">10.1190/1.1518439</pub-id>
</citation>
</ref>
<ref id="B33">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Hema</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Maurya</surname>
<given-names>S. P.</given-names>
</name>
<name>
<surname>Kant</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Singh</surname>
<given-names>A. P.</given-names>
</name>
<name>
<surname>Verma</surname>
<given-names>N.</given-names>
</name>
<name>
<surname>Sing</surname>
<given-names>R.</given-names>
</name>
<etal/>
</person-group> (<year>2024</year>). <article-title>Enhancement of CO2 monitoring in the Sleipner field (north sea) using seismic inversion based on simulated annealing of time-lapse seismic data</article-title>. <source>Mar. Petroleum Geol.</source> <volume>167</volume>, <fpage>106962</fpage>. <pub-id pub-id-type="doi">10.1016/j.marpetgeo.2024.106962</pub-id>
</citation>
</ref>
<ref id="B34">
<citation citation-type="book">
<collab>IPCC</collab> (<year>2005</year>). <article-title>Carbon dioxide capture and storage</article-title>. in <source>Special Report of the Intergovernmental Panel on Climate Change</source>. Editors <person-group person-group-type="editor">
<name>
<surname>Metz</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Davison</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>de COnick</surname>
<given-names>H. C.</given-names>
</name>
<name>
<surname>Loos</surname>
<given-names>M.</given-names>
</name>
<name>
<surname>Meyer</surname>
<given-names>L. A.</given-names>
</name>
</person-group> (<publisher-loc>Cambridge, United Kingdom</publisher-loc>: <publisher-name>Cambridge University Press</publisher-name>), <fpage>442</fpage>.</citation>
</ref>
<ref id="B35">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Izadian</surname>
<given-names>S.</given-names>
</name>
</person-group> (<year>2024</year>). <article-title>Tuning effect in time-lapse seismic inversion for CO2 plume monitoring at Sleipner field</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>137</volume>, <fpage>104224</fpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2024.104224</pub-id>
</citation>
</ref>
<ref id="B36">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Karstens</surname>
<given-names>J.</given-names>
</name>
<name>
<surname>Ahmed</surname>
<given-names>W.</given-names>
</name>
<name>
<surname>Berndt</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Class</surname>
<given-names>H.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Focused fluid flow and the sub-seabed storage of CO2: evaluating the leakage potential of seismic chimney structures for the Sleipner CO2 storage operation</article-title>. <source>Mar. Petroleum Geol.</source> <volume>88</volume>, <fpage>81</fpage>&#x2013;<lpage>93</lpage>. <pub-id pub-id-type="doi">10.1016/j.marpetgeo.2017.08.003</pub-id>
</citation>
</ref>
<ref id="B37">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Marfurt</surname>
<given-names>K. J.</given-names>
</name>
<name>
<surname>Alves</surname>
<given-names>T. M.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Pitfalls and limitations in seismic attribute interpretation of tectonic features</article-title>. <source>Interpretation</source> <volume>3</volume>, <fpage>SB5</fpage>&#x2013;<lpage>SB15</lpage>. <pub-id pub-id-type="doi">10.1190/int-2014-0122.1</pub-id>
</citation>
</ref>
<ref id="B38">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Massarweh</surname>
<given-names>O.</given-names>
</name>
<name>
<surname>Abushaikha</surname>
<given-names>A. S.</given-names>
</name>
</person-group> (<year>2024</year>). <article-title>CO2 sequestration in subsurface geological formations: a review of trapping mechanisms and monitoring techniques</article-title>. <source>Earth-Science Rev.</source> <volume>253</volume>, <fpage>104793</fpage>. <pub-id pub-id-type="doi">10.1016/j.earscirev.2024.104793</pub-id>
</citation>
</ref>
<ref id="B39">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Raknes</surname>
<given-names>E. B.</given-names>
</name>
<name>
<surname>Arntsen</surname>
<given-names>B.</given-names>
</name>
<name>
<surname>Weibull</surname>
<given-names>W.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Three-dimensional elastic full waveform inversion using seismic data from the Sleipner area</article-title>. <source>Geophys. J. Int.</source> <volume>202</volume>, <fpage>1877</fpage>&#x2013;<lpage>1894</lpage>. <pub-id pub-id-type="doi">10.1093/gji/ggv258</pub-id>
</citation>
</ref>
<ref id="B40">
<citation citation-type="confproc">
<person-group person-group-type="author">
<name>
<surname>Rasolofosaon</surname>
<given-names>P. N. J.</given-names>
</name>
<name>
<surname>Dubos-Sallee</surname>
<given-names>N.</given-names>
</name>
</person-group> (<year>2010</year>). &#x201c;<article-title>Data-driven quantitative analysis of the CO2 plume extension from 4D seismic monitoring in Sleipner</article-title>,&#x201d; in <conf-name>Proceedings of the 72nd EAGE Conference incorporating SPE EUROPEC</conf-name>, <conf-loc>Barcelona, Spain</conf-loc>, <conf-date>June 14&#x2013;17</conf-date>.</citation>
</ref>
<ref id="B41">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Rassool</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Consoli</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Townsend</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Liu</surname>
<given-names>H.</given-names>
</name>
</person-group> (<year>2020</year>). <source>Overview of organisations and policies supporting the deployment of large-scale CCS facilities</source>. <publisher-loc>Washington, DC</publisher-loc>: <publisher-name>Global CCS Institute</publisher-name>. </citation>
</ref>
<ref id="B42">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Roberts</surname>
<given-names>J. J.</given-names>
</name>
<name>
<surname>Gilfillan</surname>
<given-names>S. M.</given-names>
</name>
<name>
<surname>Stalker</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Naylor</surname>
<given-names>M.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Geochemical tracers for monitoring offshore CO2 stores</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>65</volume>, <fpage>218</fpage>&#x2013;<lpage>234</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2017.07.021</pub-id>
</citation>
</ref>
<ref id="B43">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Romanak</surname>
<given-names>K.</given-names>
</name>
<name>
<surname>Dixon</surname>
<given-names>T.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>CO2 storage guidelines and the science of monitoring: achieving project success under the California Low Carbon Fuel Standard CCS Protocol and other global regulations</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>113</volume>, <fpage>103523</fpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2021.103523</pub-id>
</citation>
</ref>
<ref id="B44">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Rubino</surname>
<given-names>J. G.</given-names>
</name>
<name>
<surname>Velis</surname>
<given-names>D. R.</given-names>
</name>
<name>
<surname>Sacchi</surname>
<given-names>M. D.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Numerical analysis of wave-induced fluid flow effects on seismic data: application to monitoring of CO<sub>2</sub> storage at the Sleipner field</article-title>. <source>J. Geophys. Res.</source> <volume>116</volume>, <fpage>B03306</fpage>. <pub-id pub-id-type="doi">10.1029/2010jb007997</pub-id>
</citation>
</ref>
<ref id="B45">
<citation citation-type="web">
<collab>Sleipner 4D Seismic Database</collab> (<year>2020</year>). <article-title>Sleipner 4D seismic dataset</article-title>. <comment>Available online at: <ext-link ext-link-type="uri" xlink:href="https://co2datashare.org/dataset/sleipner-4d-seismic-dataset/">https://co2datashare.org/dataset/sleipner-4d-seismic-dataset/</ext-link> (Accessed June 1st, 2023)</comment>.</citation>
</ref>
<ref id="B46">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Taner</surname>
<given-names>M. T.</given-names>
</name>
<name>
<surname>Koehler</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Sheriff</surname>
<given-names>R. E.</given-names>
</name>
</person-group> (<year>1979</year>). <article-title>Complex seismic trace analysis</article-title>. <source>Geophysics</source> <volume>44</volume>, <fpage>1041</fpage>&#x2013;<lpage>1063</lpage>. <pub-id pub-id-type="doi">10.1190/1.1440994</pub-id>
</citation>
</ref>
<ref id="B47">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Taner</surname>
<given-names>M. T.</given-names>
</name>
<name>
<surname>Schuelke</surname>
<given-names>J. S.</given-names>
</name>
<name>
<surname>O&#x2019;Doherty</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Baysal</surname>
<given-names>E.</given-names>
</name>
</person-group> (<year>1994</year>). &#x201c;<article-title>Seismic attributes revisited</article-title>,&#x201d; in <source>SEG technical program expanded abstracts 1994</source> (<publisher-name>Society of Exploration Geophysicists</publisher-name>), <fpage>1104</fpage>&#x2013;<lpage>1106</lpage>.</citation>
</ref>
<ref id="B48">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>White</surname>
<given-names>J. C.</given-names>
</name>
<name>
<surname>Williams</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2018b</year>). <article-title>Seismic amplitude analysis provides new insights into CO2 plume morphology at the Snohvit CO<sub>2</sub> injection operation</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>79</volume>, <fpage>313</fpage>&#x2013;<lpage>322</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2018.05.024</pub-id>
</citation>
</ref>
<ref id="B49">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>White</surname>
<given-names>J. C.</given-names>
</name>
<name>
<surname>Williams</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Furre</surname>
<given-names>A. K.</given-names>
</name>
<name>
<surname>Kiaer</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2018a</year>). <article-title>Sleipner: the ongoing challenge to determine the thickness of a thin CO<sub>2</sub> layer</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>69</volume>, <fpage>81</fpage>&#x2013;<lpage>95</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2017.10.006</pub-id>
</citation>
</ref>
<ref id="B50">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Willams</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>A.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Quantitative seismic analysis of a thin layer of CO<sub>2</sub> in the Sleipner injection plume</article-title>. <source>Geophysics</source> <volume>77</volume>, <fpage>R245</fpage>&#x2013;<lpage>R256</lpage>. <pub-id pub-id-type="doi">10.1190/geo2011-0449.1</pub-id>
</citation>
</ref>
<ref id="B51">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Willams</surname>
<given-names>G. A.</given-names>
</name>
<name>
<surname>Chadwick</surname>
<given-names>R. A.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>An improved history-match for layer spreading within the Sleipner plume including thermal propagation effects</article-title>. <source>Energy Procedia</source> <volume>114</volume>, <fpage>2856</fpage>&#x2013;<lpage>2870</lpage>. <pub-id pub-id-type="doi">10.1016/j.egypro.2017.03.1406</pub-id>
</citation>
</ref>
<ref id="B52">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yin</surname>
<given-names>Z.</given-names>
</name>
<name>
<surname>Feng</surname>
<given-names>T.</given-names>
</name>
<name>
<surname>MacBeth</surname>
<given-names>C.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Fast assimilation of frequently acquired 4D seismic data for reservoir history matching</article-title>. <source>Comput. &#x26; Geosciences</source> <volume>128</volume>, <fpage>30</fpage>&#x2013;<lpage>40</lpage>. <pub-id pub-id-type="doi">10.1016/j.cageo.2019.04.001</pub-id>
</citation>
</ref>
<ref id="B53">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zhu</surname>
<given-names>C.</given-names>
</name>
<name>
<surname>Zhang</surname>
<given-names>G.</given-names>
</name>
<name>
<surname>Lu</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Meng</surname>
<given-names>L.</given-names>
</name>
<name>
<surname>Ji</surname>
<given-names>X.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Benchmark modeling of the Sleipner CO<sub>2</sub> plume: calibration to seismic data for the uppermost layer and model sensitivity analysis</article-title>. <source>Int. J. Greenh. Gas Control</source> <volume>43</volume>, <fpage>233</fpage>&#x2013;<lpage>246</lpage>. <pub-id pub-id-type="doi">10.1016/j.ijggc.2014.12.016</pub-id>
</citation>
</ref>
<ref id="B54">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zummo</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>Agosta</surname>
<given-names>F.</given-names>
</name>
<name>
<surname>&#xc1;lvarez&#x2010;Valero</surname>
<given-names>A. M.</given-names>
</name>
<name>
<surname>Billi</surname>
<given-names>A.</given-names>
</name>
<name>
<surname>Buttitta</surname>
<given-names>D.</given-names>
</name>
<name>
<surname>Caracausi</surname>
<given-names>A.</given-names>
</name>
<etal/>
</person-group> (<year>2024</year>). <article-title>Tracing a mantle component in both paleo and modern fluids along seismogenic faults of southern Italy</article-title>. <source>Geochem. Geophys. Geosystems</source> <volume>25</volume> (<issue>11</issue>), <fpage>e2024GC011816</fpage>. <pub-id pub-id-type="doi">10.1029/2024gc011816</pub-id>
</citation>
</ref>
<ref id="B55">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Zweigel</surname>
<given-names>P.</given-names>
</name>
<name>
<surname>Arts</surname>
<given-names>R.</given-names>
</name>
<name>
<surname>Lothe</surname>
<given-names>A. E.</given-names>
</name>
<name>
<surname>Lindeberg</surname>
<given-names>E. B. G.</given-names>
</name>
</person-group> (<year>2004</year>). <article-title>Reservoir geology of the Utsira Formation at the first industrial-scale underground CO<sub>2</sub> storage site (Sleipner area, North Sea)</article-title>. <source>Geol. Soc.</source> <volume>233</volume>, <fpage>165</fpage>&#x2013;<lpage>180</lpage>. <pub-id pub-id-type="doi">10.1144/gsl.sp.2004.233.01.11</pub-id>
</citation>
</ref>
</ref-list>
</back>
</article>