<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<!DOCTYPE article PUBLIC "-//NLM//DTD Journal Publishing DTD v2.3 20070202//EN" "journalpublishing.dtd">
<article xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" article-type="research-article" dtd-version="2.3" xml:lang="EN">
<front>
<journal-meta>
<journal-id journal-id-type="publisher-id">Front. Cell. Infect. Microbiol.</journal-id>
<journal-title>Frontiers in Cellular and Infection Microbiology</journal-title>
<abbrev-journal-title abbrev-type="pubmed">Front. Cell. Infect. Microbiol.</abbrev-journal-title>
<issn pub-type="epub">2235-2988</issn>
<publisher>
<publisher-name>Frontiers Media S.A.</publisher-name>
</publisher>
</journal-meta>
<article-meta>
<article-id pub-id-type="doi">10.3389/fcimb.2023.1253095</article-id>
<article-categories>
<subj-group subj-group-type="heading">
<subject>Cellular and Infection Microbiology</subject>
<subj-group>
<subject>Original Research</subject>
</subj-group>
</subj-group>
</article-categories>
<title-group>
<article-title>Experimental and <italic>in silico</italic> evaluation of <italic>Carthamus tinctorius</italic> L. oil emulgel: a promising treatment for bacterial skin infections</article-title>
</title-group>
<contrib-group>
<contrib contrib-type="author">
<name>
<surname>Saeed</surname>
<given-names>Javaria</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Hussain Shah</surname>
<given-names>Syed Nisar</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
<xref ref-type="aff" rid="aff2">
<sup>2</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Javed</surname>
<given-names>Hina</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Aslam</surname>
<given-names>Asma</given-names>
</name>
<xref ref-type="aff" rid="aff1">
<sup>1</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Ali</surname>
<given-names>Anam</given-names>
</name>
<xref ref-type="aff" rid="aff3">
<sup>3</sup>
</xref>
</contrib>
<contrib contrib-type="author" corresp="yes">
<name>
<surname>Siddique</surname>
<given-names>Farhan</given-names>
</name>
<xref ref-type="aff" rid="aff4">
<sup>4</sup>
</xref>
<xref ref-type="aff" rid="aff5">
<sup>5</sup>
</xref>
<xref ref-type="author-notes" rid="fn001">
<sup>*</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2368185"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Zahra</surname>
<given-names>Tahreem</given-names>
</name>
<xref ref-type="aff" rid="aff6">
<sup>6</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2370522"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Bin Jardan</surname>
<given-names>Yousef A.</given-names>
</name>
<xref ref-type="aff" rid="aff7">
<sup>7</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/1674285"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Wondmie</surname>
<given-names>Gezahign Fentahun</given-names>
</name>
<xref ref-type="aff" rid="aff8">
<sup>8</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/2350986"/>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Nafidi</surname>
<given-names>Hiba-Allah</given-names>
</name>
<xref ref-type="aff" rid="aff9">
<sup>9</sup>
</xref>
</contrib>
<contrib contrib-type="author">
<name>
<surname>Bourhia</surname>
<given-names>Mohammed</given-names>
</name>
<xref ref-type="aff" rid="aff10">
<sup>10</sup>
</xref>
<uri xlink:href="https://loop.frontiersin.org/people/915935"/>
</contrib>
</contrib-group>
<aff id="aff1">
<sup>1</sup>
<institution>Department of Pharmaceutics, Faculty of Pharmacy, Bahauddin Zakariya University</institution>, <addr-line>Multan</addr-line>, <country>Pakistan</country>
</aff>
<aff id="aff2">
<sup>2</sup>
<institution>Faculty of Pharmacy, The University of Lahore</institution>, <addr-line>Lahore</addr-line>, <country>Pakistan</country>
</aff>
<aff id="aff3">
<sup>3</sup>
<institution>Department of Pharmacology, Faculty of Pharmacy, Bahauddin Zakariya University</institution>, <addr-line>Multan</addr-line>, <country>Pakistan</country>
</aff>
<aff id="aff4">
<sup>4</sup>
<institution>Department of Pharmaceutical Chemistry, Faculty of Pharmacy, Bahauddin Zakariya University</institution>, <addr-line>Multan</addr-line>, <country>Pakistan</country>
</aff>
<aff id="aff5">
<sup>5</sup>
<institution>School of Pharmaceutical Science and Technology, Tianjin University</institution>, <addr-line>Tianjin</addr-line>, <country>China</country>
</aff>
<aff id="aff6">
<sup>6</sup>
<institution>Institute of Zoology, Bahauddin Zakariya University</institution>, <addr-line>Multan</addr-line>, <country>Pakistan</country>
</aff>
<aff id="aff7">
<sup>7</sup>
<institution>Department of Pharmaceutics, College of Pharmacy, King Saud University</institution>, <addr-line>Riyadh</addr-line>, <country>Saudi Arabia</country>
</aff>
<aff id="aff8">
<sup>8</sup>
<institution>Department of Biology, Bahir Dar University</institution>, <addr-line>Bahir Dar</addr-line>, <country>Ethiopia</country>
</aff>
<aff id="aff9">
<sup>9</sup>
<institution>Department of Food Science, Faculty of Agricultural and Food Sciences, Laval University</institution>, <addr-line>Quebec City, QC</addr-line>, <country>Canada</country>
</aff>
<aff id="aff10">
<sup>10</sup>
<institution>Department of Chemistry and Biochemistry, Faculty of Medicine and Pharmacy, Ibn Zohr University</institution>, <addr-line>Laayoune</addr-line>, <country>Morocco</country>
</aff>
<author-notes>
<fn fn-type="edited-by">
<p>Edited by: Hugo Oliveira, University of Minho, Portugal</p>
</fn>
<fn fn-type="edited-by">
<p>Reviewed by: Fatma Mady, Minia University, Egypt; Mithun Rudrapal, Technology and Research, India</p>
</fn>
<fn fn-type="corresp" id="fn001">
<p>*Correspondence: Farhan Siddique, <email xlink:href="mailto:drfarhansiddique@bzu.edu.pk">drfarhansiddique@bzu.edu.pk</email>
</p>
</fn>
</author-notes>
<pub-date pub-type="epub">
<day>05</day>
<month>09</month>
<year>2023</year>
</pub-date>
<pub-date pub-type="collection">
<year>2023</year>
</pub-date>
<volume>13</volume>
<elocation-id>1253095</elocation-id>
<history>
<date date-type="received">
<day>04</day>
<month>07</month>
<year>2023</year>
</date>
<date date-type="accepted">
<day>01</day>
<month>08</month>
<year>2023</year>
</date>
</history>
<permissions>
<copyright-statement>Copyright &#xa9; 2023 Saeed, Hussain Shah, Javed, Aslam, Ali, Siddique, Zahra, Bin Jardan, Wondmie, Nafidi and Bourhia</copyright-statement>
<copyright-year>2023</copyright-year>
<copyright-holder>Saeed, Hussain Shah, Javed, Aslam, Ali, Siddique, Zahra, Bin Jardan, Wondmie, Nafidi and Bourhia</copyright-holder>
<license xlink:href="http://creativecommons.org/licenses/by/4.0/">
<p>This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.</p>
</license>
</permissions>
<abstract>
<sec>
<title>Purpose</title>
<p>The current study aimed to develop a topical herbal emulgel containing <italic>Carthamus tinctorius</italic> L. (CT) oil extract, which has been scientifically proven for its antibacterial and antioxidant activities for the ailment of bacterial skin infections.</p>
</sec>
<sec>
<title>Method</title>
<p>The CT emulgel was formulated by response surface methodology (RSM) and was evaluated by various parameters like extrudability, spreadability, pH, viscosity, and antibacterial and antioxidant activities. Molecular docking was also performed using AutoDock.</p>
</sec>
<sec>
<title>Results</title>
<p>Among all formulated CT emulgels, F9 and F8 were optimized. Optimized formulations had shown good spreadability and extrudability characteristics. Sample F8 had % inhibition of 42.131 &#xb1; 0.335, 56.720 &#xb1; 0.222, and 72.440 &#xb1; 0.335 at different concentrations. Sample F9 had % inhibition of 26.312 &#xb1; 0.280, 32.461 &#xb1; 0.328, and 42.762 &#xb1; 0.398 at concentrations of 250 &#xb5;g/ml, 500 &#xb5;g/ml, and 1,000 &#xb5;g/ml, respectively, which shows that both samples F8 and F9 have significant antioxidant potential. Optimized CT emulgels F8 and F9 had significant antibacterial activity against <italic>Staphylococcus aureus</italic> and <italic>Escherichia coli</italic> at p-value = 0.00, the Emulgel-F8 shows zone of inhibition of 24 mm for <italic>E-coli</italic> and 19 mm for <italic>S-aureus</italic>. Emulgel-F9 shows zone of inhibition of 22 mm for <italic>E-coli</italic> and 15 mm for <italic>S-aureus</italic> while pure CT- Oil extract shows zone of inhibition of 25 mm for <italic>E-coli</italic> and 20 mm for <italic>S-aureus</italic> and ciprofloxacin used as standard shows 36mm zone of inhibition against both <italic>E-coli</italic> and <italic>S-aureus</italic>. The comparative investigation through molecular docking binding affinities and interactions of ligands with various target proteins provides insights into the molecular processes behind ligand binding and may have significance for drug discovery and design for the current study.</p>
</sec>
<sec>
<title>Conclusion</title>
<p>The current study suggests that <italic>C. tinctorius</italic> L.-based emulgel has good antioxidant and antibacterial activities against <italic>E. coli</italic> for the treatment of bacterial skin infections.</p>
</sec>
</abstract>
<kwd-group>
<kwd>
<italic>Carthamus tinctorius</italic> L oil</kwd>
<kwd>extraction</kwd>
<kwd>anti-bacterial</kwd>
<kwd>anti-oxidant activity</kwd>
<kwd>molecular docking</kwd>
</kwd-group>
<counts>
<fig-count count="15"/>
<table-count count="12"/>
<equation-count count="3"/>
<ref-count count="44"/>
<page-count count="19"/>
<word-count count="9202"/>
</counts>
<custom-meta-wrap>
<custom-meta>
<meta-name>section-in-acceptance</meta-name>
<meta-value>Antibiotic Resistance and New Antimicrobial drugs</meta-value>
</custom-meta>
</custom-meta-wrap>
</article-meta>
</front>
<body>
<sec id="s1" sec-type="intro">
<label>1</label>
<title>Introduction</title>
<p>Transdermal drug delivery system (TDDS) defines the dosage form that distributes an optimum drug quantity across the skin. Its success overlaps the traditional processes including injectable and oral drug delivery (<xref ref-type="bibr" rid="B26">Kumar et&#xa0;al., 2016</xref>). It increases patient compliance, as the drug bypasses first-pass metabolism through TDDS. It also decreases the untoward effects of a drug raised due to an overdose of medicament (<xref ref-type="bibr" rid="B2">Afzal et&#xa0;al., 2022</xref>).</p>
<p>The dosage form that is comprised of combined gel and emulsion is referred to as an emulgel, which is formed by adding a gelling agent to either oil and water or water-in-oil emulsions. Emulgel shows diversity, as it has dual control on drug release due to the presence of both aqueous and non-aqueous phases in it (<xref ref-type="bibr" rid="B41">Yadav et&#xa0;al., 2016</xref>). Emulgels are widely employed for drug delivery across the skin. Their dermatological advantages are as follows: ease in the integration of drugs of hydrophobic nature, thixotropic, ungreased nature, ease in spreadability, ease in removal, emollient, stain-free, hydrophilicity, and greater shelf life with high and aesthetic appearance (<xref ref-type="bibr" rid="B8">Bhanu et&#xa0;al., 2011</xref>; <xref ref-type="bibr" rid="B37">Singla et&#xa0;al., 2012</xref>). In literature, a high rate of morbidity is reported due to skin and soft tissue infections (SSTIs) due to bacterial and fungal infections.</p>
<p>Microbes such as bacteria and yeasts often co-contribute these infections. An attractive approach for the treatment of superficial skin infections is the application of topical antimicrobials (<xref ref-type="bibr" rid="B8">Bhanu et&#xa0;al., 2011</xref>). The topical preparations show delivery of a high concentration of the drug across the skin on the targeted site with very few or no systemic side effects. However, few antibiotics, such as mupirocin and fluidic acid, show restrictions in their use due to their reported resistance (<xref ref-type="bibr" rid="B35">Sabri et&#xa0;al., 2016</xref>). Most <italic>Escherichia coli</italic> strains have been involved in various soft tissue skin infections that occur in patients of each age. Some infections recover without any treatment, but some require antibacterial treatments (<xref ref-type="bibr" rid="B33">Pagano et&#xa0;al., 2021</xref>). Almost 80% of the population uses medicinal plants in primary health care. When compared to synthetic drugs, herbal medicines have easy access, are inexpensive, and are safer (<xref ref-type="bibr" rid="B2">Afzal et&#xa0;al., 2022</xref>). Various natural or synthetic antimicrobials are being used to treat and delay the growth of different microorganisms. Antibiotics used in excess amount causes antibiotic resistance. Antibiotic resistance and toxicity may be developed by the use of synthetic drugs. To reduce any side effects, essential oils or natural products can be used. The parameters to detect the efficacy of effective components in the natural product include its chemical properties and concentration at active component. Flavonoids, saponins, and phenolics have antimicrobial properties. The efficacy of herbal products has gained the attention of researchers, as medicines based on plants have no side effects (<xref ref-type="bibr" rid="B22">Kaur et&#xa0;al., 2021</xref>).</p>
<p>
<italic>Carthamus tinctorius</italic> L. (CT), also called safflower or false saffron, is a medicinal plant that belongs to the family Compositae or Asteraceae. This shaft-like species typically grows in dusty Southern Asia, China, India, and Iran climates. It is cultivated mainly for its seeds, which are used as edible oil and contain many useful compounds such as flavonoids, phenolic acids, fatty acids, and alkynes, which contribute to its effect as an analgesic, anti-inflammatory, antioxidant, and antimicrobial (<xref ref-type="bibr" rid="B1">Abdipour et&#xa0;al., 2019</xref>). <italic>In silico</italic> studies also aid in understanding the binding energies and active sites for these biological activities (<xref ref-type="bibr" rid="B42">Yesilyurt et&#xa0;al., 2020</xref>).</p>
<p>Therefore, the recent research aimed to develop a new topically applied emulgel that contains oil extracted from seeds of <italic>C. tinctorius</italic> L. plant having both antioxidant and antibacterial properties and their <italic>in vitro</italic> evaluation of their antibacterial activity against <italic>E. coli</italic> and <italic>Staphylococcus aureus</italic>. The antibacterial effect was compared between the formulated products available in the market and prepared emulgel. The antibacterial and antioxidant activities were checked, and the collected data were analyzed statistically.</p>
</sec>
<sec id="s2">
<label>2</label>
<title>Developed methods and materials</title>
<sec id="s2_1">
<label>2.1</label>
<title>Chemicals</title>
<p>
<italic>C. tinctorius</italic> oil, Carbopol 940 polymer, polyethylene glycol, methylparaben, Tween 20, Span20, <italic>n</italic>-hexane, methanol, propylene glycol, triethanolamine, NaOH, and potassium dihydrogen phosphate were purchased from Merck (Darmstadt, Germany), as well as distilled water, Mueller&#x2013;Hinton agar (OXOID CM0337), and Nutrient broth (OXOID CM0001). All other ingredients were of analytical grade.</p>
</sec>
<sec id="s2_2">
<label>2.2</label>
<title>Collection, extraction, and isolation of oil from the plant</title>
<p>CT plants were collected from Pakistan&#x2019;s tropical regions. The oil from the CT plants&#x2019; seeds was extracted using a Soxhlet apparatus (Pyrex, Germany). For extraction, <italic>n</italic>-hexane, a hydrocarbon having a boiling point of 68.7&#xb0;C, was chosen as the preferred solvent. After extraction, oil was obtained by removing the solvent using a rotary evaporator (<xref ref-type="bibr" rid="B20">Javed et&#xa0;al., 2018a</xref>). After that, the solubility of CT oil was determined in methanol, <italic>n</italic>-hexane, and buffer solution (pH 5.5).</p>
</sec>
<sec id="s2_3">
<label>2.3</label>
<title>Design expert for experiment</title>
<p>The experimental permeation enhancer concentration like propylene glycol (PG) and polyethylene glycol (PEG) on emulgel was assessed using Design Expert (version 7.0.3). The quantities of PG and PEG were tested at three altitudes using a central composite rotatable design (CCRD), as indicated in <xref ref-type="table" rid="T1">
<bold>Table&#xa0;1</bold>
</xref>, with other variables remaining constant throughout the study while taking into account the principal point of 0, 0 in quintuplicate.</p>
<table-wrap id="T1" position="float">
<label>Table&#xa0;1</label>
<caption>
<p>Factor arrangements: (a) concrete elements analysis with coded levels and (b) experimental design range.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" rowspan="2" align="left">Serial no. (a)</th>
<th valign="top" colspan="2" align="left">Coded level factors</th>
<th valign="top" rowspan="2" align="left">PG</th>
<th valign="top" rowspan="2" align="left">PEG</th>
</tr>
<tr>
<th valign="top" align="left">X<sub>1</sub>
</th>
<th valign="top" align="left">X<sub>2</sub>
</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left">F1</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">3</td>
</tr>
<tr>
<td valign="top" align="left">F2</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F3</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">3</td>
</tr>
<tr>
<td valign="top" align="left">F4</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">2</td>
</tr>
<tr>
<td valign="top" align="left">F5</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">3</td>
</tr>
<tr>
<td valign="top" align="left">F6</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F7</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">2</td>
</tr>
<tr>
<td valign="top" align="left">F8</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">2</td>
</tr>
<tr>
<td valign="top" align="left">F9</td>
<td valign="top" align="left">&#x2212;1</td>
<td valign="top" align="left">+1</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F10</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F11</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F12</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<td valign="top" align="left">F13</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
</tr>
<tr>
<th valign="top" colspan="5" align="left">(b).</th>
</tr>
<tr>
<td valign="top" align="left">Coded level</td>
<td valign="top" colspan="2" align="left">&#x2212;1</td>
<td valign="top" align="left">0</td>
<td valign="top" align="left">+1</td>
</tr>
<tr>
<td valign="top" align="left">X<sub>1</sub> (g) PG</td>
<td valign="top" colspan="2" align="left">6</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">13</td>
</tr>
<tr>
<td valign="top" align="left">X<sub>2</sub> (g) PEG</td>
<td valign="top" colspan="2" align="left">2</td>
<td valign="top" align="left">3</td>
<td valign="top" align="left">4</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn>
<p>PG, propylene glycol; PEG, polyethylene glycol.</p>
</fn>
</table-wrap-foot>
</table-wrap>
</sec>
<sec id="s2_4">
<label>2.4</label>
<title>Preparation of emulgel</title>
<p>As shown in <xref ref-type="table" rid="T2">
<bold>Table&#xa0;2</bold>
</xref>, 100&#xa0;g of the <italic>C. tinctorius</italic> L. oil-based emulgel was made using various concentrations of PG and PEG. Initially, the gel phase was made with the necessary Carbopol 940 concentration to water at an appropriate speed with continuous stirring by a mechanical stirrer. Span20 was mixed with liquid paraffin, following the addition of CT oil to form the oil phase. Tween 20 was dissolved in distilled water to form an aqueous phase, and then polyethylene glycol-1000 and methylparaben were added. Then, both phases were heated to 70&#xb0;C to 80&#xb0;C, cooled at room temperature, and mixed to make emulsion. To develop emulgel, the emulsion was diluted with gel in a ratio of 1:1 while swirling gently (<xref ref-type="bibr" rid="B21">Javed et&#xa0;al., 2018b</xref>). <xref ref-type="fig" rid="f1">
<bold>Figure&#xa0;1</bold>
</xref> shows the physical appearance of the formulated emulgel.</p>
<table-wrap id="T2" position="float">
<label>Table&#xa0;2</label>
<caption>
<p>
<italic>Carthamus tinctorius</italic> L. oil-based emulgel 100-g preparation.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="left">Formulations</th>
<th valign="top" align="left">
<italic>C. tinctorius</italic> oil % w/w</th>
<th valign="top" align="left">Carbopol 940 (% w/w)</th>
<th valign="top" align="left">X<sub>1</sub> = propylene glycol (%w/w)</th>
<th valign="top" align="left">X<sub>2</sub> = PEG (%w/w)</th>
<th valign="top" align="left">Tween 20 (%w/w)</th>
<th valign="top" align="left">Span20 (%w/w)</th>
<th valign="top" align="left">Methyl paraben (%w/w)</th>
<th valign="top" align="left">Triethanolamine</th>
<th valign="top" align="left">Distilled Water</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left">F1</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">3</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">81.5</td>
</tr>
<tr>
<td valign="top" align="left">F2</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">80.15</td>
</tr>
<tr>
<td valign="top" align="left">F3</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">3</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">81.5</td>
</tr>
<tr>
<td valign="top" align="left">F4</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">10</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">82.7</td>
</tr>
<tr>
<td valign="top" align="left">F5</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">3</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">85.15</td>
</tr>
<tr>
<td valign="top" align="left">F6</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">85.15</td>
</tr>
<tr>
<td valign="top" align="left">F7</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">77.15</td>
</tr>
<tr>
<td valign="top" align="left">F8</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">13</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">79.15</td>
</tr>
<tr>
<td valign="top" align="left">F9</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">84.15</td>
</tr>
<tr>
<td valign="top" align="left">F10</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">84.15</td>
</tr>
<tr>
<td valign="top" align="left">F11</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">84.15</td>
</tr>
<tr>
<td valign="top" align="left">F12</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">84.15</td>
</tr>
<tr>
<td valign="top" align="left">F13</td>
<td valign="top" align="left">2.5</td>
<td valign="top" align="left">2</td>
<td valign="top" align="left">6</td>
<td valign="top" align="left">4</td>
<td valign="top" align="left">0.30</td>
<td valign="top" align="left">0.99</td>
<td valign="top" align="left">0.03</td>
<td valign="top" align="left">0.02</td>
<td valign="top" align="left">84.15</td>
</tr>
</tbody>
</table>
</table-wrap>
<fig id="f1" position="float">
<label>Figure&#xa0;1</label>
<caption>
<p>Physicochemical characteristics of CT emulgels. CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g001.tif"/>
</fig>
</sec>
<sec id="s2_5">
<label>2.5</label>
<title>Physicochemical evaluation</title>
<p>The visual appearance, color, homogeneity, consistency, and pH of each CT-emulgel formulation were evaluated (<xref ref-type="bibr" rid="B31">Mottaleb et&#xa0;al., 2007</xref>). At 25&#xb0;C, Brookfield viscometer with spindle assessed CT-emulgel formulation viscosity (<xref ref-type="bibr" rid="B21">Javed et&#xa0;al., 2018b</xref>).</p>
<sec id="s2_5_1">
<label>2.5.1</label>
<title>Skin irritation test</title>
<p>Applying CT-emulgel formulations on well-shaven rat skin, the skin irritation test was monitored for 24&#xa0;h to observe unfavorable changes in morphology and color.</p>
</sec>
<sec id="s2_5_2">
<label>2.5.2</label>
<title>Spreadability</title>
<p>CT-emulgel mixture with a mass of 0.1&#xa0;g was placed on the transparent 1.6-cm-diameter center of a glass slide, which was then squeezed for 6&#xa0;min by placing a second glass slide on it. Each CT emulgel had a centimeter-long circled spreading portion (n = 3). The following formula was used to calculate the average (<xref ref-type="bibr" rid="B21">Javed et&#xa0;al., 2018b</xref>).</p>
<disp-formula>
<label>(1)</label>
<mml:math display="block" id="M1">
<mml:mrow>
<mml:mi>S</mml:mi>
<mml:mo>=</mml:mo>
<mml:mo stretchy="false">[</mml:mo>
<mml:mi>M</mml:mi>
<mml:mo>&#xd7;</mml:mo>
<mml:mi>L</mml:mi>
<mml:mo stretchy="false">/</mml:mo>
<mml:mi>T</mml:mi>
</mml:mrow>
<mml:mo stretchy="false">]</mml:mo>
<mml:mo>,</mml:mo>
</mml:math>
</disp-formula>
<p>where <italic>M</italic> stands for the weight (g) bent to the top slide, <italic>L</italic> for the length (cm), and <italic>T</italic> for the time (seconds).</p>
</sec>
<sec id="s2_5_3">
<label>2.5.3</label>
<title>Extrudability</title>
<p>The extrudability test of each CT emulgel determines if it flows freely from the collapsible tubes. The extrudability of CT emulgel was determined using a hardness tester. CT emulgel with a mass of 5&#xa0;g was placed inside a collapsible tube. A pressure of 1 kg/cm<sup>2</sup> was applied for 30 seconds by holding the tube with a plunger. Emulgel extruded from each tube was measured (<xref ref-type="bibr" rid="B21">Javed et&#xa0;al., 2018b</xref>).</p>
</sec>
</sec>
<sec id="s2_6">
<label>2.6</label>
<title>Fourier transform infrared spectroscopy</title>
<p>By conducting Fourier transform infrared (FTIR) spectroscopy of polymers, drugs, and drug-loaded emulgels, structural factors such as polymer&#x2013;drug interactions of CT-emulgel formulations were confirmed (<xref ref-type="bibr" rid="B11">Chakole et&#xa0;al., 2009</xref>). FTIR spectroscopy analyzed the values of several functional groups.</p>
</sec>
<sec id="s2_7">
<label>2.7</label>
<title>Stability studies and statistical analysis</title>
<p>The stability compartment was maintained at 40.1&#xb0;C to check the stability of all CT emulgels for 6 months. After 0 months to 6 months, different physical aspects of CT emulgels, such as viscosity, pH, and drug contents, were examined (<xref ref-type="bibr" rid="B27">Mathias and Hussain, 2010</xref>). With Microsoft Excel 2013 statistical data, the mean and standard deviation were analyzed. Thirteen distinct formulations were compared statistically using analysis of variance (ANOVA) (<xref ref-type="bibr" rid="B23">Khan et&#xa0;al., 2020</xref>).</p>
</sec>
<sec id="s2_8">
<label>2.8</label>
<title>Drug release of CT emulgels (<italic>in vitro</italic>)</title>
<p>The <italic>in vitro</italic> drug release study of CT emulgels utilized the dissolution apparatus [USP type II]. The CT oil extract was administered as a pharmaceutical agent in phosphate-buffered saline (PBS), with a release medium at a pH of 5.5 and a temperature of 37.5&#xb0;C. This was achieved by encapsulating 1&#xa0;g of CT emulgel within a cellophane membrane and attaching it to the paddle of a dissolution apparatus using a thread. A volume of 500&#xa0;ml of PBS was employed, while the paddle rotation speed ranged from 85 to 100 revolutions per minute (RPM). From the release media, 5&#xa0;ml of the sample was removed after a predetermined amount of time and replaced with the same volume of fresh media (<xref ref-type="bibr" rid="B36">Shah et&#xa0;al., 2009</xref>). The collected sample was examined using a UV spectrophotometer (PerkinElmer, Waltham, MA, USA) to ascertain its CT oil concentration at 256 nm (<xref ref-type="bibr" rid="B3">Akaike, 1998</xref>). A calibration curve was applied to determine the amount of CT oil extract present in each batch of CT emulgel (<xref ref-type="bibr" rid="B32">Nisar Hussain Shah, 2012</xref>).</p>
</sec>
<sec id="s2_9">
<label>2.9</label>
<title>Thermal analysis</title>
<p>Thermal behavior of optimized emulgels F8 and F9 was recorded by thermogravimetric analysis (TGA) to analyze the physical state of CT oil present in emulgel formulations. The sample sizes used were 14.7 mg and 16.6 mg for F8 and F9, respectively. Under a nitrogen environment, heat stress was applied at a rate of 10&#xb0;C/min from 20&#xb0;C to 350&#xb0;C, and thermogram peaks were recorded (<xref ref-type="bibr" rid="B14">Devi et&#xa0;al., 2021</xref>).</p>
</sec>
<sec id="s2_10">
<label>2.10</label>
<title>Scanning electron microscopy analysis</title>
<p>Scanning electron microscopy (SEM) was used to analyze the surface morphology and superficial shape of emulgels. The sampling for SEM was performed by attaching emulgels on metal slabs using adhesive tape and kept in a vacuum chamber for drying. A layer of 10-nm thickness consisting of a dense gold coating was subsequently applied using a sputter coater. Subsequently, a high-resolution SEM analysis was conducted to detect and examine the sample (<xref ref-type="bibr" rid="B6">Ambala and Vemula, 2015</xref>).</p>
</sec>
<sec id="s2_11">
<label>2.11</label>
<title>Antioxidant activity</title>
<p>The radical scavenging activity of 1,1-diphenyl-2-picrylhydrazyl (DPPH) was calculated to check the antioxidant activity of CT emulgels F8 and F9. At various concentrations (250 &#xb5;g/ml, 500 &#xb5;g/ml, 1,000 &#xb5;g/ml), 1&#xa0;ml from 0.1 mM of DPPH solution was prepared in ethanol and then mixed with 3&#xa0;ml of the tested compounds in ethanol formulated by successive dilution. The prepared mixture was placed at room temperature of approximately 22&#xb0;C and shaken for 30&#xa0;min, and then the reaction mixture&#x2019;s absorbance was investigated using a UV spectrophotometer at 517 nm. Different concentrations were used to detect the inhibition concentration for 50% of DPPH free radical (IC<sub>50</sub>). Acarbose was used as a standard antioxidant agent (<xref ref-type="bibr" rid="B6">Ambala and Vemula, 2015</xref>; <xref ref-type="bibr" rid="B28">M&#xe9;ndez et&#xa0;al., 2018</xref>). The following equation was used to calculate radical scavenging activity.</p>
<p>% Radical Scavenging = (1 &#x2212; Absorbance of sample/Absorbance of Control) &#xd7; 100.</p>
<p>The absorbance of control is the absorbance of pure DPPH solution.</p>
</sec>
<sec id="s2_12">
<label>2.12</label>
<title>Antibacterial activity</title>
<sec id="s2_12_1">
<label>2.12.1</label>
<title>Media preparation</title>
<p>Mueller&#x2013;Hinton is a commonly used agar medium in microbiology for antimicrobial susceptibility testing. This agar media method was employed for the preparation of the media. To prepare the media, 38&#xa0;g of agar was added to 1 L of water and then heated to dissolve it completely after autoclaving for 15&#xa0;min at 121&#xb0;C. This media was utilized for the agar well diffusion procedure. A nutrient broth media was created to prepare the bacterial solution by adding 13&#xa0;g of powder to 1,000 ml of distilled water. After thorough mixing, this was sterilized by autoclaving for 15&#xa0;min at 121&#xb0;C (<xref ref-type="bibr" rid="B16">Ermawati et&#xa0;al., 2020</xref>).</p>
</sec>
<sec id="s2_12_2">
<label>2.12.2</label>
<title>Experimental microbes</title>
<p>Different microbial strains, <italic>S. aureus</italic> (ATCC-2529) and <italic>E. coli</italic> (ATCC-27853) were used.</p>
</sec>
<sec id="s2_12_3">
<label>2.12.3</label>
<title>Preparation of bacterial solution</title>
<p>The freshly prepared culture of <italic>S. aureus</italic> and <italic>E. coli</italic> was selected. In the next step, nutrient broth media was inoculated with bacterial colonies. To obtain precise results, nutrient media was inoculated with maximum colonies, and for each <italic>S. aureus</italic> and <italic>E. coli</italic>, an optical density greater than 1 was found.</p>
</sec>
<sec id="s2_12_4">
<label>2.12.4</label>
<title>Plating</title>
<p>Petri dishes were used for plating and solidified by pouring liquefied Mueller&#x2013;Hinton agar (11&#x2013;14 ml). Then, the plates were labeled (<xref ref-type="bibr" rid="B5">Alexander et&#xa0;al., 2013</xref>).</p>
</sec>
<sec id="s2_12_5">
<label>2.12.5</label>
<title>Serial dilution</title>
<p>To obtain a precise number of bacteria per 1&#xa0;ml, serial dilutions were prepared as necessary to attain 1,000 bacteria per 100 &#xb5;l. For serial dilution, there were five Falcon test tubes for each strain, and a total of 10 test tubes were used. A nutrient broth of 9&#xa0;ml was added to each test tube and then labeled as 101, 102, 103, 104, and 105 for each strain of bacteria. Ten Falcon tubes were used for each strain of bacterial dilution. Nutrient broth with volume of 9&#xa0;ml was added to each Falcon tube and then labeled as 101, 102, 103, 104, and 105 for each bacterial strain. From bacterial solution, 1&#xa0;ml was used for Falcon tube 5, labeled as 105, and mixed and added to Falcon tube 104. The same procedure was repeated until the last one was finished, which was Falcon tube 4 (as Falcon tube 5 contained 105 per ml, same as the others). Dilution 101 with volume of 100 &#xb5;l was taken via micropipette and poured on plates containing Mueller&#x2013;Hinton agar, as this contained 1,000 bacteria (<xref ref-type="bibr" rid="B34">RaMalingam et&#xa0;al., 2022</xref>).</p>
</sec>
<sec id="s2_12_6">
<label>2.12.6</label>
<title>Spreading and well formation</title>
<p>In the next step, 100 &#xb5;l of serial dilution was selected and poured into a petri dish labeled as 4, designated for specific bacteria. Following that, with the help of swabs and loops, lawn and wells were made in petri dishes, respectively. A cotton swab was used to spread bacterial solution in multiple directions to prepare equally dispensed bacterial loon. According to the arrangement of sample per plate, 1-ml autoclaved micropipette tips were used to spread wells in the agar media.</p>
</sec>
<sec id="s2_12_7">
<label>2.12.7</label>
<title>Sample loading and incubation</title>
<p>In this step, a micropipette in the range of 10 &#xb5;l to 200 &#xb5;l was used to pour 100 &#xb5;g into the well. The sample was incubated for 24&#xa0;h at 37&#xb0;C. CT emulgel with a mass of 100 &#xb5;g containing 2 &#xb5;g of the extract was loaded in wells. The standard used was ciprofloxacin 10 &#x3bc;g (<xref ref-type="bibr" rid="B40">Wulansari et&#xa0;al., 2017</xref>; <xref ref-type="bibr" rid="B13">Chauhan, 2021</xref>). The plates were removed from the incubator after 24&#xa0;h, and the diameter of the inhibition zone was measured.</p>
</sec>
</sec>
<sec id="s2_13">
<label>2.13</label>
<title>Minimum inhibitory concentration and minimum bactericidal concentration determination</title>
<p>After 48-h incubation, the minimum inhibitory concentration (MIC) determined was the minimum concentration that shows no turbidity, and the minimum bactericidal concentration (MBC) determined was the minimum concentration that produces not even a single colony of bacteria. With the use of MBC and MIC, serial dilutions of oil were primed. To make serial dilutions, MIC and MBC values were prepared using the microliter broth method; with this method, a methanol extract of 10 &#xb5;g/100 &#xb5;l was prepared, and MIC and MBC for bacterium <italic>E</italic> ranges were determined using the microliter broth dilution method. This method filled the wells with 100 &#xb5;l of nutrient broth to prepare serial dilutions. The ultimate oil extract concentrations in the wells were 10 &#xb5;g/ml, 5 &#xb5;g/ml, 2.5 &#xb5;g/ml, 1.5 &#xb5;g/ml, 1.25 &#xb5;g/ml, 0.625 &#xb5;g/ml, 0.312 &#xb5;g/ml, 0.156 &#xb5;g/ml, 0.078 &#xb5;g/ml, and 0.039 &#xb5;g/ml. After this, 100 &#x3bc;l of <italic>E. coli</italic>-based bacterial sample was added to well numbers 1&#x2013;10, taken from 108 Falcon tube dilution. Then, the last two wells were marked as negative and positive controls. The negative control had only 100 &#xb5;l of methanol extract solution, while the positive control had 100 &#xb5;l of bacterial solution. These controls were then incubated for 24&#xa0;h at 37&#xb0;C. From this, MIC and MBC values were identified. In order to confirm bacterial absence, 100 &#xb5;l was taken from the wells marked to have MIC and MBC values, poured into two separate nutrient agar plates, and incubated at 37&#xb0;C for 18&#x2013;42 h (<xref ref-type="bibr" rid="B2">Afzal et&#xa0;al., 2022</xref>).</p>
</sec>
<sec id="s2_14">
<label>2.14</label>
<title>Molecular docking methodology</title>
<p>The RCSB protein data repository included urate oxidase and <italic>Helicobacter pylori</italic> urease crystalline structures for virtual screening. Molecules were docked using MGLTools, AutoDock4, and Autogrid4 binary files. International Union of Pure and Applied Chemistry (IUPAC) designations were used to draw the ligand structures in ChemDraw Ultra.</p>
<p>The RCSB protein data repository included urate oxidase and <italic>H. pylori</italic> urease crystalline structures for virtual screening (<xref ref-type="bibr" rid="B4">Alawlaqi et al., 2023</xref>; <xref ref-type="bibr" rid="B19">Jabeen et al., 2023</xref>) (1R4U and 4HI0). Molecules were docked using MGLTools, AutoDock4, and Autogrid4 binary files (<xref ref-type="bibr" rid="B30">Morris et&#xa0;al., 2009</xref>). The 2D structures were depicted using the ChemDraw Ultra software (<xref ref-type="bibr" rid="B15">Draw, 2010</xref>), utilizing their IUPAC names. Subsequently, the Chem 3D Pro software (<xref ref-type="bibr" rid="B10">CambridgeSoft, 2009</xref>) was employed to perform energy minimization. The ligand structures underwent optimization and were subsequently saved in the sdf format. The Open Babel graphical user interface (GUI) software was utilized to convert these structures into the pdbqt format compatible with AutoDock. The pre-processing and visualization of proteins were conducted using the Discovery Studio Visualizer software developed by BIOVIA (<xref ref-type="bibr" rid="B38">Visualizer, 2005</xref>). The protein molecules in BIOVIA&#x2019;s Discovery Studio Visualizer were devoid of heteroatoms, co-crystal ligands, and solvent molecules following a deletion process. After adding polar hydrogen and Kollman charges to each atom, the protein structures were saved in pdbqt format for autodocking (<xref ref-type="bibr" rid="B17">Ferreira et&#xa0;al., 2015</xref>). Structure-based virtual screening was performed using AutoDock4. The grid parameter file was created using the co-crystal ligand&#x2019;s grid box dimensions (<xref ref-type="bibr" rid="B44">Zentgraf et&#xa0;al., 2007</xref>). The docking parameter files were generated using LGA and AutoDock4Zn (<xref ref-type="bibr" rid="B30">Morris et&#xa0;al., 2009</xref>). In order to ensure the reliability of the study, a total of 50 poses and 300 individuals were included in the analysis. The active sites of both proteins were subjected to docking analysis with the ligand library (<xref ref-type="bibr" rid="B43">Yusuf et&#xa0;al., 2008</xref>).</p>
</sec>
</sec>
<sec id="s3">
<label>3</label>
<title>Experimental results</title>
<sec id="s3_1">
<label>3.1</label>
<title>Solubility studies</title>
<p>
<italic>C. tinctorius</italic> L. oil&#x2019;s solubility was tested using PBS at pH 5.5 and was found to be 0.004&#x2013;0.003 mg/ml. Its solubility in hexane was 0.098&#x2013;0.01 mg/ml, while it was 0.092&#x2013;0.01 mg/ml in methanol. These findings demonstrated the distinct solubility of <italic>C. tinctorius</italic> L. oil in hexane to other solvents.</p>
</sec>
<sec id="s3_2">
<label>3.2</label>
<title>Physicochemical characteristics</title>
<p>
<xref ref-type="table" rid="T3">
<bold>Table&#xa0;3</bold>
</xref> contains the physical characteristic analysis of the prepared <italic>C. tinctorius</italic> L. oil-based emulgels, including their spreadability, homogeneity, consistency, thickness, and pH.</p>
<table-wrap id="T3" position="float">
<label>Table&#xa0;3</label>
<caption>
<p>Physical characteristics of formulated CT emulgels (n = 3, mean &#xb1; SEM).</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">Formulations</th>
<th valign="top" align="center">pH</th>
<th valign="top" align="center">Spreadability<break/>(mean &#xb1; SEM)</th>
<th valign="top" align="center">Extrudability (mean &#xb1; SEM)</th>
<th valign="top" align="center">Viscosity (centipoise) (mean &#xb1; SEM)</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">F1</td>
<td valign="top" align="center">6.2 &#xb1; 0.033</td>
<td valign="top" align="center">4.420 &#xb1; 0.006</td>
<td valign="top" align="center">0.910 &#xb1; 0.006</td>
<td valign="top" align="center">53,500.000 &#xb1; 0.006</td>
</tr>
<tr>
<td valign="top" align="center">F2</td>
<td valign="top" align="center">5.7 &#xb1; 0.033</td>
<td valign="top" align="center">4.617 &#xb1; 0.003</td>
<td valign="top" align="center">0.923 &#xb1; 0.009</td>
<td valign="top" align="center">29,466.667 &#xb1; 0.003</td>
</tr>
<tr>
<td valign="top" align="center">F3</td>
<td valign="top" align="center">5.8 &#xb1; 0.033</td>
<td valign="top" align="center">4.527 &#xb1; 0.009</td>
<td valign="top" align="center">0.920 &#xb1; 0.006</td>
<td valign="top" align="center">47,000.000 &#xb1; 0.009</td>
</tr>
<tr>
<td valign="top" align="center">F4</td>
<td valign="top" align="center">5.6 &#xb1; 0.033</td>
<td valign="top" align="center">4.270 &#xb1; 0.006</td>
<td valign="top" align="center">0.960 &#xb1; 0.021</td>
<td valign="top" align="center">52,300.000 &#xb1; 0.006</td>
</tr>
<tr>
<td valign="top" align="center">F5</td>
<td valign="top" align="center">6.1 &#xb1; 0.033</td>
<td valign="top" align="center">4.970 &#xb1; 0.006</td>
<td valign="top" align="center">0.937 &#xb1; 0.006</td>
<td valign="top" align="center">31,898.000 &#xb1; 0.006</td>
</tr>
<tr>
<td valign="top" align="center">F6</td>
<td valign="top" align="center">5.5 &#xb1; 0.033</td>
<td valign="top" align="center">4.073 &#xb1; 0.003</td>
<td valign="top" align="center">0.927 &#xb1; 0.003</td>
<td valign="top" align="center">23,110.000 &#xb1; 485.215</td>
</tr>
<tr>
<td valign="top" align="center">F7</td>
<td valign="top" align="center">6.3 &#xb1; 0.033</td>
<td valign="top" align="center">4.160 &#xb1; 0.006</td>
<td valign="top" align="center">0.947 &#xb1; 0.009</td>
<td valign="top" align="center">37,236.333 &#xb1; 68.216</td>
</tr>
<tr>
<td valign="top" align="center">F8</td>
<td valign="top" align="center">5.7 &#xb1; 0.033</td>
<td valign="top" align="center">4.660 &#xb1; 0.006</td>
<td valign="top" align="center">0.973 &#xb1; 0.012</td>
<td valign="top" align="center">59,400.000 &#xb1; 152.753</td>
</tr>
<tr>
<td valign="top" align="center">F9</td>
<td valign="top" align="center">5.3 &#xb1; 0.033</td>
<td valign="top" align="center">4.677 &#xb1; 0.003</td>
<td valign="top" align="center">0.947 &#xb1; 0.012</td>
<td valign="top" align="center">57,200.000 &#xb1; 57.735</td>
</tr>
<tr>
<td valign="top" align="center">F10</td>
<td valign="top" align="center">5.3 &#xb1; 0.033</td>
<td valign="top" align="center">4.747 &#xb1; 0.003</td>
<td valign="top" align="center">0.950 &#xb1; 0.010</td>
<td valign="top" align="center">54,100.000 &#xb1; 1,154.701</td>
</tr>
<tr>
<td valign="top" align="center">F11</td>
<td valign="top" align="center">5.1 &#xb1; 0.033</td>
<td valign="top" align="center">4.977 &#xb1; 0.003</td>
<td valign="top" align="center">0.970 &#xb1; 0.006</td>
<td valign="top" align="center">51,500.000 &#xb1; 173.205</td>
</tr>
<tr>
<td valign="top" align="center">F12</td>
<td valign="top" align="center">5.5 &#xb1; 0.033</td>
<td valign="top" align="center">4.443 &#xb1; 0.007</td>
<td valign="top" align="center">0.947 &#xb1; 0.015</td>
<td valign="top" align="center">50,456.667 &#xb1; 110.504</td>
</tr>
<tr>
<td valign="top" align="center">F13</td>
<td valign="top" align="center">5.5 &#xb1; 0.033</td>
<td valign="top" align="center">4.080 &#xb1; 0.006</td>
<td valign="top" align="center">0.940 &#xb1; 0.015</td>
<td valign="top" align="center">52,233.333 &#xb1; 88.192</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn>
<p>CT, Carthamus tinctorius L.</p>
</fn>
</table-wrap-foot>
</table-wrap>
<sec id="s3_2_1">
<label>3.2.1</label>
<title>Stability testing and Draize&#x2019;s skin irritation test</title>
<p>According to the outcomes of stability testing, all CT-emulgel formulations were carried out by keeping them all for 6 months at a temperature of 40&#xb0;C &#xb1; 1&#xb0;C in a stability chamber. All CT-emulgel formulations had satisfactory appearances, and no significant alterations in drug content, drug release behavior, viscosity, pH, or moisture content were found. All CT-emulgel formulations underwent a 30-day skin irritation test using human volunteers. According to the findings, there were no skin lesions, irritations, or scratches. Similar findings were reported in a previously reported article (<xref ref-type="bibr" rid="B20">Javed et&#xa0;al., 2018a</xref>; <xref ref-type="bibr" rid="B21">Javed et&#xa0;al., 2018b</xref>).</p>
</sec>
<sec id="s3_2_2">
<label>3.2.2</label>
<title>Spreadability and extrudability</title>
<p>According to the data presented in <xref ref-type="table" rid="T3">
<bold>Table&#xa0;3</bold>
</xref> and <xref ref-type="fig" rid="f1">
<bold>Figure&#xa0;1</bold>
</xref>, the spreadability range of all CT emulgels prepared with Carbopol 940 as the gelling agent was observed to be approximately 4.3 &#xb1; 0.1 g&#xb7;cm/s to 4.7 &#xb1; 0.1 g&#xb7;cm/s. CT emulgel F9 spread easily in comparison to all other preparations (<xref ref-type="bibr" rid="B29">Mohite and Salunkhe, 2019</xref>). The extrudability results showed that less viscous CT emulgel had acceptable tube flow ability, while more viscous CT-emulgel preparations were difficult to extrude from tubes. The extrudability ranges were 1.272 &#xb1; 0.01, 0.961 &#xb1; 0.01, and 0.866 &#xb1; 0.01. CT emulgel F9 demonstrated extrudability of 0.961 0.01 g/cm. The results are given in <xref ref-type="table" rid="T3">
<bold>Table&#xa0;3</bold>
</xref>.</p>
</sec>
</sec>
<sec id="s3_3">
<label>3.3</label>
<title>RSM optimization result in mathematical modeling</title>
<p>Multiple linear regression analysis (MLRA) was employed to produce a mathematical relationship based on a polynomial equation. The positive and negative significant effects have demonstrated the comparative impacts of each factor on a given response of CT emulgels. Negative numbers represent antagonistic effects on each response, while positive values demonstrate synergistic effects.</p>
<p>p-Value (p 0.05) for answer response Y1 indicates linear contributions. A (PG) and B (PEG) both exhibited negligible antagonistic and cross-product effects. According to ANOVA (<xref ref-type="table" rid="T4">
<bold>Table&#xa0;4</bold>
</xref>), AB (PG with PEG) demonstrated a significant antagonistic reaction, A2 (a quadratic contribution) demonstrated a significant synergistic response, and B2 demonstrated a synergistic non-significant effect. <xref ref-type="table" rid="T5">
<bold>Table&#xa0;5</bold>
</xref> demonstrates multiple linear regression analysis. Here, a polynomial equation has coded factors.</p>
<table-wrap id="T4" position="float">
<label>Table&#xa0;4</label>
<caption>
<p>Analysis of multiple linear regression analysis (MLRA).</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="left">Regression coefficient</th>
<th valign="top" align="left">Y<sub>1</sub>
</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left">Model</td>
<td valign="top" align="left">Quadratic</td>
</tr>
<tr>
<td valign="top" align="left">Intercept</td>
<td valign="top" align="left">75.59</td>
</tr>
<tr>
<td valign="top" align="left">A</td>
<td valign="top" align="left">&#x2212;0.3817</td>
</tr>
<tr>
<td valign="top" align="left">B</td>
<td valign="top" align="left">&#x2212;1.65</td>
</tr>
<tr>
<td valign="top" align="left">AB</td>
<td valign="top" align="left">&#x2212;4.02</td>
</tr>
<tr>
<td valign="top" align="left">A<sup>2</sup>
</td>
<td valign="top" align="left">4.74</td>
</tr>
<tr>
<td valign="top" align="left">B<sup>2</sup>
</td>
<td valign="top" align="left">1.08</td>
</tr>
<tr>
<td valign="top" align="left">Model (p-value)</td>
<td valign="top" align="left">0.01</td>
</tr>
<tr>
<td valign="top" align="left">Coefficient value %</td>
<td valign="top" align="left">1.79</td>
</tr>
<tr>
<td valign="top" align="left">R<sup>2</sup>
</td>
<td valign="top" align="left">0.92</td>
</tr>
<tr>
<td valign="top" align="left">Adjusted R<sup>2</sup>
</td>
<td valign="top" align="left">0.85</td>
</tr>
<tr>
<td valign="top" align="left">Predicted R<sup>2</sup>
</td>
<td valign="top" align="left">0.74</td>
</tr>
<tr>
<td valign="top" align="left">Adjusted precision</td>
<td valign="top" align="left">11.60</td>
</tr>
<tr>
<td valign="top" align="left">Standard deviation</td>
<td valign="top" align="left">1.43</td>
</tr>
<tr>
<td valign="top" align="left">Mean</td>
<td valign="top" align="left">79.55</td>
</tr>
<tr>
<td valign="top" align="left">F-value</td>
<td valign="top" align="left">12.64</td>
</tr>
</tbody>
</table>
</table-wrap>
<table-wrap id="T5" position="float">
<label>Table&#xa0;5</label>
<caption>
<p>Variance analysis of <italic>Carthamus tinctorius</italic> oil-based emulgel.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="left">Source</th>
<th valign="top" align="center">Sum of square</th>
<th valign="top" align="center">Df</th>
<th valign="top" align="center">Mean square</th>
<th valign="top" align="center">F-value</th>
<th valign="top" align="center">p-Value</th>
<th valign="top" align="center"/>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="left">Model</td>
<td valign="top" align="left">134.57</td>
<td valign="top" align="left">5</td>
<td valign="top" align="left">26.91</td>
<td valign="top" align="left">13.25</td>
<td valign="top" align="left">0.006</td>
<td valign="top" align="left">Significant</td>
</tr>
<tr>
<td valign="top" align="left">A-PG</td>
<td valign="top" align="left">0.98</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">0.98</td>
<td valign="top" align="left">0.48</td>
<td valign="top" align="left">0.518</td>
<td valign="top" align="left">Non-significant</td>
</tr>
<tr>
<td valign="top" align="left">B-PEG</td>
<td valign="top" align="left">18.25</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">18.25</td>
<td valign="top" align="left">8.98</td>
<td valign="top" align="left">0.0302</td>
<td valign="top" align="left">Non-significant</td>
</tr>
<tr>
<td valign="top" align="left">AB</td>
<td valign="top" align="left">65.23</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">65.23</td>
<td valign="top" align="left">32.12</td>
<td valign="top" align="left">0.0024</td>
<td valign="top" align="left">Significant</td>
</tr>
<tr>
<td valign="top" align="left">A<sup>2</sup>
</td>
<td valign="top" align="left">50.92</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">5.92</td>
<td valign="top" align="left">25.07</td>
<td valign="top" align="left">0.0041</td>
<td valign="top" align="left">Significant</td>
</tr>
<tr>
<td valign="top" align="left">B<sup>2</sup>
</td>
<td valign="top" align="left">2.81</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">2.81</td>
<td valign="top" align="left">1.38</td>
<td valign="top" align="left">0.2926</td>
<td valign="top" align="left">Non-significant</td>
</tr>
<tr>
<td valign="top" align="left">Residual</td>
<td valign="top" align="left">10.15</td>
<td valign="top" align="left">5</td>
<td valign="top" align="left">2.03</td>
<td valign="top" align="left">&#x2013;</td>
<td valign="top" align="left">&#x2013;</td>
<td valign="top" align="left"/>
</tr>
<tr>
<td valign="top" align="left">Lack of fit</td>
<td valign="top" align="left">2.15</td>
<td valign="top" align="left">3</td>
<td valign="top" align="left">0.72</td>
<td valign="top" align="left">0.18</td>
<td valign="top" align="left">0.9023</td>
<td valign="top" align="left">Non-significant</td>
</tr>
</tbody>
</table>
</table-wrap>
<disp-formula>
<label>(2)</label>
<mml:math display="block" id="M2">
<mml:mrow>
<mml:msub>
<mml:mtext>Y</mml:mtext>
<mml:mn>1</mml:mn>
</mml:msub>
<mml:mo>=</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msub>
<mml:mtext>b</mml:mtext>
<mml:mn>0</mml:mn>
</mml:msub>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msub>
<mml:mtext>b</mml:mtext>
<mml:mn>1</mml:mn>
</mml:msub>
<mml:mtext>A&#xa0;</mml:mtext>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msub>
<mml:mtext>b</mml:mtext>
<mml:mn>2</mml:mn>
</mml:msub>
<mml:mtext>B&#xa0;</mml:mtext>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msub>
<mml:mtext>b</mml:mtext>
<mml:mrow>
<mml:mn>12</mml:mn>
</mml:mrow>
</mml:msub>
<mml:mtext>AB&#xa0;</mml:mtext>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msubsup>
<mml:mtext>b</mml:mtext>
<mml:mrow>
<mml:mn>1</mml:mn>
</mml:mrow>
<mml:mrow>
<mml:mn>2</mml:mn>
</mml:mrow>
</mml:msubsup>
<mml:msup>
<mml:mtext>A</mml:mtext>
<mml:mn>2</mml:mn>
</mml:msup>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:msubsup>
<mml:mtext>b</mml:mtext>
<mml:mrow>
<mml:mn>2</mml:mn>
</mml:mrow>
<mml:mrow>
<mml:mn>2</mml:mn>
</mml:mrow>
</mml:msubsup>
<mml:msup>
<mml:mtext>B</mml:mtext>
<mml:mn>2</mml:mn>
</mml:msup>
<mml:mo>,</mml:mo>
</mml:mrow>
</mml:math>
</disp-formula>
<disp-formula>
<label>(3)</label>
<mml:math display="block" id="M3">
<mml:mrow>
<mml:msub>
<mml:mtext>Y</mml:mtext>
<mml:mrow>
<mml:mn>1</mml:mn>
<mml:mo>&#xa0;</mml:mo>
<mml:mo>=</mml:mo>
<mml:mo>&#xa0;</mml:mo>
</mml:mrow>
</mml:msub>
<mml:mn>75.59</mml:mn>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mo>&#x2212;</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mn>0.38</mml:mn>
<mml:mtext>A&#xa0;</mml:mtext>
<mml:mo>&#x2212;</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mn>1.65</mml:mn>
<mml:mtext>B&#xa0;</mml:mtext>
<mml:mo>&#x2212;</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mn>4.02</mml:mn>
<mml:mtext>AB&#xa0;</mml:mtext>
<mml:mo>+</mml:mo>
<mml:mtext>&#xa0;</mml:mtext>
<mml:mn>4.74</mml:mn>
<mml:msup>
<mml:mtext>A</mml:mtext>
<mml:mrow>
<mml:mn>2</mml:mn>
<mml:mo>&#xa0;</mml:mo>
<mml:mo>+</mml:mo>
<mml:mo>&#xa0;</mml:mo>
</mml:mrow>
</mml:msup>
<mml:mn>1.08</mml:mn>
<mml:msup>
<mml:mtext>B</mml:mtext>
<mml:mn>2</mml:mn>
</mml:msup>
<mml:mo>,</mml:mo>
</mml:mrow>
</mml:math>
</disp-formula>
<p>According to the equations, it was determined that while &#x201c;B&#x201d; had a significant negative antagonistic impact on the release of CT oil in PBS, &#x201c;A&#x201d; had a relatively minor negative antagonistic effect at pH 5.5. Both of the variables (AB) demonstrated potent combined effects that demonstrated adverse (antagonistic) consequences. Propylene glycols (A2), which had a high positive (synergistic) effect, had a quadratic relationship with PEG, which is a weak positive (synergistic) relationship. Propylene glycol (A) [&#x2212;0.38A + 4.74A2] showed that the percentage of drug release increased when PG concentration was higher, while the concentration of PG fell when PG concentration was lower. According to previously published research (<xref ref-type="bibr" rid="B20">Javed et&#xa0;al., 2018a</xref>), the percentage of drug release rose with higher PEG concentrations and decreased with lower PEG concentrations. This is shown by the equation PEG (B) [&#x2212;1.65B + 1.08B2]. <xref ref-type="fig" rid="f2">
<bold>Figure&#xa0;2</bold>
</xref> displays the 3D surface plots and the contour plot. The CT-emulgel F9 formulation was chosen for further research on either humans or animals since the findings of the response surface methodology (RSM) data analysis revealed that it had the largest amount of drug release when compared to other formulations.</p>
<fig id="f2" position="float">
<label>Figure&#xa0;2</label>
<caption>
<p>Contour 3D surface plots of optimized CT emulgels F8 and F9. CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g002.tif"/>
</fig>
</sec>
<sec id="s3_4">
<label>3.4</label>
<title>Stability testing and Draize&#x2019;s skin irritation test</title>
<p>According to the stability findings, all CT-emulgel formulation preparations were carried out by keeping them all for 6 months at a temperature of 40&#xb0;C &#xb1; 1&#xb0;C in a stability chamber. The findings demonstrated that all CT emulgels have satisfactory outward appearances, and no significant alterations in drug content, drug release behavior, viscosity, pH, or moisture content were found. All CT-emulgel preparations underwent a 30-day skin irritation test using human volunteers. According to the findings, there were no skin lesions, irritations, or scratches. Similar findings were reported in previously reported articles (<xref ref-type="bibr" rid="B18">Hadgraft and Lane, 2016</xref>).</p>
</sec>
<sec id="s3_5">
<label>3.5</label>
<title>
<italic>In vitro</italic> drug release study</title>
<p>
<italic>In vitro</italic> drug release profiles of CT emulgels are shown in <xref ref-type="fig" rid="f3">
<bold>Figure&#xa0;3</bold>
</xref>. Drug release was observed in optimized CT-emulgel formulations in the order of F9 &gt;F8. In comparison to other emulgel preparations, the F9 was thought to have the highest CT release (90%). Various factors, such as gelling agents, emulsifying agents, and formulation viscosity, may affect drug release. In our study, polyethylene glycol was used as a penetration enhancer, and by increasing polyethylene concentration, drug release was also increased (<xref ref-type="bibr" rid="B9">Burki et&#xa0;al., 2020</xref>).</p>
<fig id="f3" position="float">
<label>Figure&#xa0;3</label>
<caption>
<p>Cumulative % drug release of CT-emulgel formulations. CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g003.tif"/>
</fig>
</sec>
<sec id="s3_6">
<label>3.6</label>
<title>Fourier transform infrared spectroscopy</title>
<p>The analysis of FTIR spectra of the produced CT emulgels, <italic>C. tinctorius</italic> L. oil, and Carbopol 940 revealed several interesting findings, as shown in <xref ref-type="fig" rid="f4">
<bold>Figure&#xa0;4</bold>
</xref>. No significant differences were observed in the FTIR spectra of the CT emulgels, <italic>C. tinctorius</italic> L. oil, and Carbopol 940. This suggests that the formulation process and the addition of excipients did not cause major changes in the chemical composition of these components. In <xref ref-type="fig" rid="f4">
<bold>Figure&#xa0;4</bold>
</xref>, the amide group (&#x2013;NH) in the CT emulgel exhibited broad peaks in the range of 2,800&#x2013;3,800/cm. These peaks were wider than those observed in pure drug polymer. The broadening of the peaks indicates potential interactions between the amide group and other components in the emulgel formulation. The C&#x2550;C alkene group showed distinct peaks in the range of 1,440&#x2013;1,650/cm. According to a recent article (<xref ref-type="bibr" rid="B20">Javed et&#xa0;al., 2018a</xref>), this peak was more pronounced in the CT-emulgel formulation compared to the polymer and CT oil alone. The presence of a distinct peak in this range consistently across all formulations suggests the presence of the alkene group in the emulgel and strong bond interactions within this group. Peaks in the range of 1,120&#x2013;1,180/cm were observed due to the presence of phenyl groups, while peaks in the range of 700&#x2013;733/cm were attributed to the presence of hydroxyl (O&#x2013;H) groups. These findings indicate the presence of specific functional groups in the CT-emulgel formulation. The stability of CT oil in all CT-emulgel formulations, including Carbopol 940, polymers, and other excipients, was determined to be satisfactory (<xref ref-type="bibr" rid="B7">Ayoub et&#xa0;al., 2015</xref>; <xref ref-type="bibr" rid="B1">Abdipour et&#xa0;al., 2019</xref>). This implies that the formulation is effective in preserving the stability of the CT oil even in the presence of other ingredients. The results are significant, as they provide valuable insights into the chemical interactions and stability of the CT-emulgel formulation. The broadening and shifting of peaks in the FTIR spectra indicate the occurrence of chemical interactions between various components in the emulgel. These findings support the suitability of the chosen formulation for the intended purpose.</p>
<fig id="f4" position="float">
<label>Figure&#xa0;4</label>
<caption>
<p>FTIR peaks of CT emulgels F8 and F9, <italic>Carthamus tinctorius</italic> L. oil, and Carbopol 940. FTIR, Fourier transform infrared; CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g004.tif"/>
</fig>
</sec>
<sec id="s3_7">
<label>3.7</label>
<title>Thermal analysis</title>
<p>The TGA measurement was used to check the thermal stability of emulgel within the 25&#xb0;C&#x2013;350&#xb0;C temperature range. The TGA plot of the emulgel is presented in <xref ref-type="fig" rid="f5">
<bold>Figure&#xa0;5</bold>
</xref>. The oil&#x2019;s flash point is 110&#xb0;C, indicating minimal degradation of the emulgel at this temperature and suggesting a stable formulation.</p>
<fig id="f5" position="float">
<label>Figure&#xa0;5</label>
<caption>
<p>Thermal analysis of optimized CT emulgels F8 and F9. CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g005.tif"/>
</fig>
</sec>
<sec id="s3_8">
<label>3.8</label>
<title>SEM analysis</title>
<p>The SEM analysis of the emulgel reveals that the surface exhibits an irregularly shaped structure, characterized by the presence of cracks and wrinkles. This observation is depicted in <xref ref-type="fig" rid="f6">
<bold>Figure&#xa0;6</bold>
</xref>, which illustrates samples F8 and F9. Additionally, the image reveals the presence of minute porous channels, which can be attributed to the removal of water molecules during the preparation process. The presence of various irregularly sized pockets of CT oil on the surface may be attributed to the phenomenon of polymer cross-linking within emulgel formulations.</p>
<fig id="f6" position="float">
<label>Figure&#xa0;6</label>
<caption>
<p>SEM investigation of CT emulgels F8 <bold>(A, B)</bold> and F9 <bold>(C, D)</bold> at different magnifications. SEM, scanning electron microscopy; CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g006.tif"/>
</fig>
</sec>
<sec id="s3_9">
<label>3.9</label>
<title>Measurement of DPPH assay for antioxidant activity</title>
<p>The antioxidant activity of optimized CT emulgels was also checked using DPPH free radical scavenging assay. In this assay, the protons were accepted as free radicals from the antioxidant substrate, decreasing its absorbance, which was reserved as an amount of radical scavenging.</p>
<p>Sample F8 had % inhibition of 42.131 &#xb1; 0.335, 56.720 &#xb1; 0.222, and 72.440 &#xb1; 0.335 at different concentrations. Sample F9 had % inhibition of 26.312 &#xb1; 0.280, 32.461 &#xb1; 0.328, and 42.762 &#xb1; 0.398 at concentrations of 250 &#xb5;g/ml, 500 &#xb5;g/ml, and 1,000 &#xb5;g/ml, respectively. The standard drug used had % inhibition of 24.030 &#xb1; 0.578, 26.030 &#xb1; 0.619, and 33.607 &#xb1; 0.294 at concentrations of 250 &#xb5;g/ml, 500 &#xb5;g/ml, and 1,000 &#xb5;g/ml, respectively, which shows that both samples F8 and F9 have significant antioxidant potential. The radical scavenging activity of optimized CT emulgels F8 and F9 is also shown in <xref ref-type="fig" rid="f7">
<bold>Figure&#xa0;7</bold>
</xref> and <xref ref-type="table" rid="T6">
<bold>Table&#xa0;6</bold>
</xref>.</p>
<fig id="f7" position="float">
<label>Figure&#xa0;7</label>
<caption>
<p>Radical scavenging activity of CT emulgels F8 and F9. CT, <italic>Carthamus tinctorius</italic> L.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g007.tif"/>
</fig>
<table-wrap id="T6" position="float">
<label>Table&#xa0;6</label>
<caption>
<p>Antioxidant activity (DPPH assay).</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" colspan="2" align="left">Sample</th>
<th valign="top" align="center">Concentration (&#xb5;g/ml)</th>
<th valign="top" align="center">Absorption</th>
<th valign="top" align="center">% inhibition &#xb1; SEM</th>
<th valign="top" align="center">IC<sub>50</sub> (&#xb5;g/ml)</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" rowspan="3" align="left">F8</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">250</td>
<td valign="top" align="left">1.964</td>
<td valign="top" align="left">42.131 &#xb1; 0.335</td>
<td valign="top" rowspan="3" align="left">375.15</td>
</tr>
<tr>
<td valign="top" align="left">2</td>
<td valign="top" align="left">500</td>
<td valign="top" align="left">1.449</td>
<td valign="top" align="left">56.720 &#xb1; 0.222</td>
</tr>
<tr>
<td valign="top" align="left">3</td>
<td valign="top" align="left">1,000</td>
<td valign="top" align="left">0.917</td>
<td valign="top" align="left">72.440 &#xb1; 0.335</td>
</tr>
<tr>
<td valign="top" rowspan="3" align="left">F9</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">250</td>
<td valign="top" align="left">2.5132</td>
<td valign="top" align="left">26.312 &#xb1; 0.280</td>
<td valign="top" rowspan="3" align="left">132.8</td>
</tr>
<tr>
<td valign="top" align="left">2</td>
<td valign="top" align="left">500</td>
<td valign="top" align="left">2.2791</td>
<td valign="top" align="left">32.461 &#xb1; 0.328</td>
</tr>
<tr>
<td valign="top" align="left">3</td>
<td valign="top" align="left">1,000</td>
<td valign="top" align="left">1.9701</td>
<td valign="top" align="left">42.762 &#xb1; 0.398</td>
</tr>
<tr>
<td valign="top" rowspan="3" align="left">Standard (acarbose)</td>
<td valign="top" align="left">1</td>
<td valign="top" align="left">250</td>
<td valign="top" align="left">2.598</td>
<td valign="top" align="left">24.030 &#xb1; 0.578</td>
<td valign="top" rowspan="3" align="left">123.583</td>
</tr>
<tr>
<td valign="top" align="left">2</td>
<td valign="top" align="left">500</td>
<td valign="top" align="left">2.509</td>
<td valign="top" align="left">26.030 &#xb1; 0.619</td>
</tr>
<tr>
<td valign="top" align="left">3</td>
<td valign="top" align="left">1,000</td>
<td valign="top" align="left">2.282</td>
<td valign="top" align="left">33.607 &#xb1; 0.294</td>
</tr>
</tbody>
</table>
</table-wrap>
</sec>
<sec id="s3_10">
<label>3.10</label>
<title>Antibacterial activity</title>
<p>As a result of the study, it was found that <italic>C. tinctorius</italic> L. oil-based emulgels F8 and F9 possess antibacterial action against different test strains. The results obtained in terms of the diameter of the zone of inhibition (mm) are summarized in <xref ref-type="fig" rid="f8">
<bold>Figure&#xa0;8</bold>
</xref>. Bacterial strains like <italic>E. coli</italic> and <italic>S. aureus</italic> were inhibited by emulgel formulations.</p>
<fig id="f8" position="float">
<label>Figure&#xa0;8</label>
<caption>
<p>Antibacterial activity of <italic>Carthamus tinctorius</italic> L. (CT) oil against <bold>(A)</bold> <italic>Escherichia coli</italic> and <bold>(B)</bold> <italic>Staphylococcus aureus</italic>. <bold>(C)</bold> CT emulgels F8 and F9 against <italic>E coli</italic>. <bold>(D)</bold> CT emulgels F8 and F9 against <italic>S. aureus</italic>.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g008.tif"/>
</fig>
<p>To determine the antibacterial activity of various formulations of emulgel, the diameter and zone of inhibition (mm) were measured and compared. The specified amount of emulgel was taken in the recent research. It was observed that CT emulgel had significant antibacterial activity against <italic>E. coli</italic> and <italic>S. aureus</italic> as shown in <xref ref-type="fig" rid="f8">
<bold>Figure&#xa0;8</bold>
</xref>. The compared results of CT emulgel F8 and CT emulgel F9 indicate that samples F8 and F9 had maximum activity against <italic>E. coli</italic> with a small zone of inhibition toward <italic>S. aureus</italic>. However, pure CT oil shows a significant zone of inhibition against both bacterial strains.</p>
<p>A p-value of 0.00, which is less than 0.05, means that there is a significant difference existing among the means as shown in <xref ref-type="table" rid="T7">
<bold>Table&#xa0;7</bold>
</xref>. The statistical analysis was conducted using the MINITAB 17 statistical package software, specifically employing the one-way ANOVA method (p&lt; 0.05). All formulations collectively exhibited a statistically significant antibacterial effect against all tested bacteria, as indicated by a p-value of 0.00 in <xref ref-type="table" rid="T7">
<bold>Table&#xa0;7</bold>
</xref>.</p>
<table-wrap id="T7" position="float">
<label>Table&#xa0;7</label>
<caption>
<p>Variance scores of CT emulgels F9 and F8 against <italic>Escherichia coli</italic>.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">Source</th>
<th valign="top" align="center">DE</th>
<th valign="top" align="center">Adj SS</th>
<th valign="top" align="center">Adj MS</th>
<th valign="top" align="center">F-value</th>
<th valign="top" align="center">p-Value</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">CI</td>
<td valign="top" align="center">2</td>
<td valign="top" align="center">366.22</td>
<td valign="top" align="center">183.111</td>
<td valign="top" align="center">274.67</td>
<td valign="top" align="center">0.000</td>
</tr>
<tr>
<td valign="top" align="center">Error</td>
<td valign="top" align="center">6</td>
<td valign="top" align="center">4.00</td>
<td valign="top" align="center">0.66</td>
<td valign="top" align="center">&#x2013;</td>
<td valign="top" align="center">&#x2013;</td>
</tr>
<tr>
<td valign="top" align="center">Total</td>
<td valign="top" align="center">8</td>
<td valign="top" align="center">370.22</td>
<td valign="top" align="center">&#x2013;</td>
<td valign="top" align="center">&#x2013;</td>
<td valign="top" align="center">&#x2013;</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn>
<p>CT, Carthamus tinctorius L.</p>
</fn>
</table-wrap-foot>
</table-wrap>
<p>Here, F8 shows more mean area in the zone of inhibition as compared to F9, but standard drug ciprofloxacin shows a greater zone of inhibition as compared with other formulations.</p>
<p>Emulgel F8 shows a zone of inhibition of 24&#xa0;mm for <italic>E. coli</italic> and 19&#xa0;mm for <italic>S. aureus</italic>. Emulgel F9 shows a zone of inhibition of 22&#xa0;mm for <italic>E. coli</italic> and 15&#xa0;mm for <italic>S. aureus</italic>. Pure CT oil extract shows the zone of inhibition of 25&#xa0;mm for <italic>E. coli</italic> and 20&#xa0;mm for <italic>S. aureus</italic>. Ciprofloxacin used as standard shows a 36-mm zone of inhibition against both <italic>E. coli</italic> and <italic>S. aureus</italic> as shown in <xref ref-type="table" rid="T8">
<bold>Tables&#xa0;8</bold>
</xref>, <xref ref-type="table" rid="T9">
<bold>9</bold>
</xref> and <xref ref-type="fig" rid="f9">
<bold>Figure&#xa0;9</bold>
</xref>.</p>
<table-wrap id="T8" position="float">
<label>Table&#xa0;8</label>
<caption>
<p>Mean extract zone of inhibition against <italic>Escherichia coli</italic> (n = 3).</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">C1</th>
<th valign="top" align="center">Bacterium</th>
<th valign="top" align="center">Mean</th>
<th valign="top" align="center">Standard deviation</th>
<th valign="top" align="center">95% CI</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" rowspan="2" align="center">F8</td>
<td valign="top" align="left">
<italic>Escherichia coli</italic>
</td>
<td valign="top" align="center">24.333</td>
<td valign="top" align="center">0.577</td>
<td valign="top" align="center">(23.180, 25.487)</td>
</tr>
<tr>
<td valign="top" align="left">
<italic>Staphylococcus aureus</italic>
</td>
<td valign="top" align="center">19.333</td>
<td valign="top" align="center">0.577</td>
<td valign="top" align="center">(18.180, 20.487)</td>
</tr>
<tr>
<td valign="top" rowspan="2" align="center">F9</td>
<td valign="top" align="left">
<italic>E. coli</italic>
</td>
<td valign="top" align="center">21.667</td>
<td valign="top" align="center">0.577</td>
<td valign="top" align="center">(20.514, 22.079)</td>
</tr>
<tr>
<td valign="top" align="left">
<italic>S. aureus</italic>
</td>
<td valign="top" align="center">15.667</td>
<td valign="top" align="center">1.155</td>
<td valign="top" align="center">(14.180, 16.487)</td>
</tr>
<tr>
<td valign="top" rowspan="2" align="center">Standard (ciprofloxacin)</td>
<td valign="top" align="left">
<italic>E. coli</italic>
</td>
<td valign="top" align="center">36.333</td>
<td valign="top" align="center">1.155</td>
<td valign="top" align="center">(35.254, 37.079)</td>
</tr>
<tr>
<td valign="top" align="left">
<italic>S. aureus</italic>
</td>
<td valign="top" align="right">35.667</td>
<td valign="top" align="center">0.577</td>
<td valign="top" align="center">(34.254, 36.079)</td>
</tr>
</tbody>
</table>
</table-wrap>
<table-wrap id="T9" position="float">
<label>Table&#xa0;9</label>
<caption>
<p>Mean &#xb1; SEM (mm) inhibitory zone diameter.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">Formulations</th>
<th valign="top" align="center">
<italic>Staphylococcus aureus</italic>
</th>
<th valign="top" align="center">
<italic>Escherichia coli</italic>
</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">F8</td>
<td valign="top" align="center">19.0 &#xb1; 0.33</td>
<td valign="top" align="center">24.33 &#xb1; 0.33</td>
</tr>
<tr>
<td valign="top" align="center">F9</td>
<td valign="top" align="center">15 &#xb1; 0.66</td>
<td valign="top" align="center">22.2 &#xb1; 0.66</td>
</tr>
<tr>
<td valign="top" align="center">
<italic>Carthamus tinctorius</italic> L. oil</td>
<td valign="top" align="center">18.33 &#xb1; 0.33</td>
<td valign="top" align="center">20.60 &#xb1; 0.33</td>
</tr>
<tr>
<td valign="top" align="center">Standard (ciprofloxacin)</td>
<td valign="top" align="center">36.66 &#xb1; 0.66</td>
<td valign="top" align="center">36.66 &#xb1; 0.66</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>MIC and MBC values were 0.03 &#xb5;g/100 &#xb5;l and 0.06 &#xb5;g/100 &#xb5;l, respectively, for <italic>E. coli</italic> and 0.25 &#xb5;g/100 &#xb5;l and 0.05 &#xb5;g/100 &#xb5;l, respectively, for <italic>S. aureus</italic> as shown in <xref ref-type="table" rid="T10">
<bold>Table&#xa0;10</bold>
</xref>. The graphical representation of the zone of inhibition against both <italic>S. aureus</italic> and <italic>E. coli</italic> is also shown in <xref ref-type="fig" rid="f9">
<bold>Figure&#xa0;9</bold>
</xref> and <xref ref-type="table" rid="T10">
<bold>Table&#xa0;10</bold>
</xref>.</p>
<table-wrap id="T10" position="float">
<label>Table&#xa0;10</label>
<caption>
<p>
<italic>Escherichia coli</italic> (n = 3) and <italic>Staphylococcus aureus</italic> (n = 3) MIC and MBC values of pure oil extract.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">MIC conc. &#xb5;g/100 &#xb5;l<break/>Mean &#xb1; SEM</th>
<th valign="top" align="center">MBC conc. &#xb5;g/100 &#xb5;l<break/>Mean &#xb1; SEM</th>
<th valign="top" align="center">Bacterial strain tested</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">0.03 &#xb1; 0.003</td>
<td valign="top" align="center">0.06 &#xb1; 0.008</td>
<td valign="top" align="center">
<italic>E. coli</italic>
</td>
</tr>
<tr>
<td valign="top" align="center">0.025 &#xb1; 0.003</td>
<td valign="top" align="center">0.05 &#xb1; 0.075</td>
<td valign="top" align="center">
<italic>S. aureus</italic>
</td>
</tr>
</tbody>
</table>
<table-wrap-foot>
<fn>
<p>MIC, minimum inhibitory concentration; MBC, minimum bactericidal concentration.</p>
</fn>
</table-wrap-foot>
</table-wrap>
<fig id="f9" position="float">
<label>Figure&#xa0;9</label>
<caption>
<p>Graphical representation of zone of inhibition against bacteria <italic>Staphylococcus aureus</italic> and <italic>Escherichia coli</italic>.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g009.tif"/>
</fig>
</sec>
</sec>
<sec id="s4">
<label>4</label>
<title>
<italic>In silico</italic> results</title>
<p>The crystalline structures of urate oxidase, known for its antioxidant properties, and <italic>H. pylori</italic> urease, recognized for its antibacterial activity, were obtained for virtual screening. Protein Data Bank (PDB) identifiers 1R4U and 4HI0 were utilized to access these structures from the RCSB protein data library. The crystal structures of these proteins were demonstrated in their native state, with a resolution of 2.20 &#xc5;. Additionally, the crystal structures of these proteins were examined in their binding state with the investigated ligands 1_KA&#x2013;10_KA. The results presented in <xref ref-type="table" rid="T11">
<bold>Tables&#xa0;11</bold>
</xref>, <xref ref-type="table" rid="T12">
<bold>12</bold>
</xref> demonstrate the binding affinity, hydrogen bonding, hydrophobic interactions, and electrostatic interactions between the active site pocket amino acids and the proteins and the corresponding distances measured in angstroms.</p>
<table-wrap id="T11" position="float">
<label>Table&#xa0;11</label>
<caption>
<p>1R4U protein ligands&#x2019; binding affinity (kcal/mol) and active site binding pocket interactions in angstrom.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">Ligands with target protein 1R4U</th>
<th valign="top" align="center">Isolated extract compounds</th>
<th valign="top" align="center">Binding score in kcal/mol</th>
<th valign="top" align="center">Binding pocket interactions of active site</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">1_KA</td>
<td valign="top" align="center">Acacetin</td>
<td valign="top" align="center">&#x2212;7.1</td>
<td valign="top" align="center">ARG176 (4.30), ARG176 (4.28), ARG176 (2.37), ASN254 (2.48), GLU259 (3.60),<break/>ARG176 (3.79), HIS256 (3.28)</td>
</tr>
<tr>
<td valign="top" align="center">2_KA</td>
<td valign="top" align="center">Acacetin-7-<italic>O</italic>-alpha-<sc>l</sc>-rhamnopyranoside</td>
<td valign="top" align="center">&#x2212;7.4</td>
<td valign="top" align="center">LEU170 (4.65), TRP174 (4.57)<break/>GLU259 (3.66), ARG176 (3.69), HIS256 (3.48), TYR257 (3.22), GLU259 (3.60), THR173 (2.61)</td>
</tr>
<tr>
<td valign="top" align="center">3_KA</td>
<td valign="top" align="center">Acacetin-7-<italic>O</italic>-&#x3b2;-<sc>d</sc>-apiofuranosyl (1&#x2192;6)-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucoside</td>
<td valign="top" align="center">&#x2212;8.3</td>
<td valign="top" align="center">LEU170 (3.54), PHE258 (5.35), THR173 (2.30), GLU259 (2.20),<break/>PHE258 (5.52), LEU170 (4.79)</td>
</tr>
<tr>
<td valign="top" align="center">4_KA</td>
<td valign="top" align="center">3<italic>Z</italic>,5<italic>E</italic>-Trideca-1,3,5-triene-7,9,11-triyne</td>
<td valign="top" align="center">&#x2212;4.3</td>
<td valign="top" align="center">ARG176 (4.92)</td>
</tr>
<tr>
<td valign="top" align="center">5_KA</td>
<td valign="top" align="center">3<italic>E</italic>,11<italic>E</italic>-Trideca-1,3,11-triene-5,7,9-triyne</td>
<td valign="top" align="center">&#x2212;4.4</td>
<td valign="top" align="center">PHE159 (4.28), VAL227 (4.33),</td>
</tr>
<tr>
<td valign="top" align="center">6_KA</td>
<td valign="top" align="center">
<italic>trans</italic>-3-Tridecene-5,7,9,11-tetrayne-1,2-diol</td>
<td valign="top" align="center">&#x2212;4.9</td>
<td valign="top" align="center">ILE177 (3.00), TYR257 (2.18),</td>
</tr>
<tr>
<td valign="top" align="center">7_KA</td>
<td valign="top" align="center">2<italic>Z</italic>-Decaene-4,6-diyne-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;5.8</td>
<td valign="top" align="center">ARG176 (2.37), TYR257 (2.74)<break/>ILE177 (5.06), PHE278 (4.68), ARG176 (2.33)</td>
</tr>
<tr>
<td valign="top" align="center">8_KA</td>
<td valign="top" align="center">8<italic>Z</italic>-Decaene-4,6-diyne-1-ol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucuronyl-(1&#x2033;,2&#x2032;)-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;4.4</td>
<td valign="top" align="center">PHE159 (4.49), ILE288 (4.92)</td>
</tr>
<tr>
<td valign="top" align="center">9_KA</td>
<td valign="top" align="center">8<italic>Z</italic>-Decaene-4,6-diyne-1-ol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucuronyl-(1&#x2033;,2&#x2032;)-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;6.6</td>
<td valign="top" align="center">ILE177 (2.08), HIS256 (3.19), THR173 (2.53), TYR257 (2.39),<break/>HIS256 (3.74), VAL227 (4.35), ASP175 (2.95), PHE159 (4.06)</td>
</tr>
<tr>
<td valign="top" align="center">10_KA</td>
<td valign="top" align="center">(2<italic>E</italic>)-Tetradecaene-4,6-diyne-1,10,14-triol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;5.8</td>
<td valign="top" align="center">GLU259 (2.62), GLY286 (3.59), THR173 (2.40), GLN228 (2.40),<break/>PHE159 (3.90), HIS256 (2.55)</td>
</tr>
</tbody>
</table>
</table-wrap>
<table-wrap id="T12" position="float">
<label>Table&#xa0;12</label>
<caption>
<p>Binding affinity (kcal/mol), hydrogen binding, and hydrophobic and electrostatic interactions in angstrom for 4HI0 protein ligands.</p>
</caption>
<table frame="hsides">
<thead>
<tr>
<th valign="top" align="center">Ligands with target protein 4HI0</th>
<th valign="top" align="center">Isolated extract compounds</th>
<th valign="top" align="center">Binding score in kcal/mol</th>
<th valign="top" align="center">Binding pocket interactions of active site</th>
</tr>
</thead>
<tbody>
<tr>
<td valign="top" align="center">1_KA</td>
<td valign="top" align="center">Acacetin</td>
<td valign="top" align="center">&#x2212;7.7</td>
<td valign="top" align="center">ALA16 (4.45)<break/>LYS146 (4.22), ASN177 (2.61)<break/>LYS146 (3.66), ARG179 (4.39), LYS146 (4.89), LYS146 (3.87)</td>
</tr>
<tr>
<td valign="top" align="center">2_KA</td>
<td valign="top" align="center">Acacetin-7-<italic>O</italic>-alpha-<sc>l</sc>-rhamnopyranoside</td>
<td valign="top" align="center">&#x2212;8.0</td>
<td valign="top" align="center">GLY13 (3.74), LYS146 (3.64), LYS146 (3.87), LEU149 (4.95), ALA16 (4.07), ALA16 (4.43), ASN145 (2.55), ARG179 (2.19), ASP148 (2.53),<break/>THR15 (3.70)</td>
</tr>
<tr>
<td valign="top" align="center">3_KA</td>
<td valign="top" align="center">Acacetin-7-<italic>O</italic>-&#x3b2;-<sc>d</sc>-apiofuranosyl (1&#x2192;6)-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucoside</td>
<td valign="top" align="center">&#x2212;8.3</td>
<td valign="top" align="center">ALA16 (3.60), LYS146 (4.37), ARG179 (4.87)<break/>LYS146 (4.62), ARG179 (4.15), GLY11 (2.39), LYS14 (2.85), LYS14 (2.89), THR15 (2.61), ASP37 (2.75), VAL10 (3.28)<break/>ALA16 (3.85)</td>
</tr>
<tr>
<td valign="top" align="center">4_KA</td>
<td valign="top" align="center">3<italic>Z</italic>,5<italic>E</italic>-Trideca-1,3,5-triene-7,9,11-triyne</td>
<td valign="top" align="center">&#x2212;4.4</td>
<td valign="top" align="center">PHE173 (4.75), PRO172 (5.05)</td>
</tr>
<tr>
<td valign="top" align="center">5_KA</td>
<td valign="top" align="center">3<italic>E</italic>,11<italic>E</italic>-Trideca-1,3,11-triene-5,7,9-triyne</td>
<td valign="top" align="center">&#x2212;4.2</td>
<td valign="top" align="center">PHE175 (3.79), LEU157 (4.24)</td>
</tr>
<tr>
<td valign="top" align="center">6_KA</td>
<td valign="top" align="center">
<italic>trans</italic>-3-Tridecene-5,7,9,11-tetrayne-1,2-diol</td>
<td valign="top" align="center">&#x2212;4.9</td>
<td valign="top" align="center">ASP148 (2.43), ASN177 (2.20), ILE178 (2.45), ASN177 (1.97)</td>
</tr>
<tr>
<td valign="top" align="center">7_KA</td>
<td valign="top" align="center">2<italic>Z</italic>-Decaene-4,6-diyne-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;6.5</td>
<td valign="top" align="center">LYS146 (4.12), ARG179 (4.31), THR15 (2.69)</td>
</tr>
<tr>
<td valign="top" align="center">8_KA</td>
<td valign="top" align="center">8<italic>Z</italic>-Decaene-4,6-diyne-1-ol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucuronyl-(1&#x2033;,2&#x2032;)-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;4.7</td>
<td valign="top" align="center">LYS165 (4.78)</td>
</tr>
<tr>
<td valign="top" align="center">9_KA</td>
<td valign="top" align="center">8<italic>Z</italic>-Decaene-4,6-diyne-1-ol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucuronyl-(1&#x2033;,2&#x2032;)-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;7.2</td>
<td valign="top" align="center">ASP37 (2.19), ASP37 (3.28)<break/>PHE46 (5.01), GLY11 (2.66), GLY13 (2.16), LYS14 (2.47), THR15 (2.75)</td>
</tr>
<tr>
<td valign="top" align="center">10_KA</td>
<td valign="top" align="center">(2<italic>E</italic>)-Tetradecaene-4,6-diyne-1,10,14-triol-1-<italic>O</italic>-&#x3b2;-<sc>d</sc>-glucopyranoside</td>
<td valign="top" align="center">&#x2212;6.1</td>
<td valign="top" align="center">LYS146 (3.47), ARG179 (3.33), THR15 (2.62), ASP43 (2.71), ASP145 (2.04)</td>
</tr>
</tbody>
</table>
</table-wrap>
<p>In this comparative analysis, <xref ref-type="table" rid="T11">
<bold>Table&#xa0;11</bold>
</xref> shows the binding affinities and interactions of 10 ligands (1_KA to 10_KA) with protein 1R4U. The binding affinity (&#x394;G) is a measure of how tightly a ligand binds to a protein, with more negative values indicating stronger binding. The interactions include hydrogen bonding, hydrophobic interactions, and electrostatic interactions, which play crucial roles in stabilizing ligand&#x2013;protein complexes. Among the ligands, 3_KA (<xref ref-type="fig" rid="f10">
<bold>Figure&#xa0;10</bold>
</xref>) shows the highest binding affinity of &#x2212;8.3 kcal/mol, indicating that it forms a strong and stable complex with the protein. This ligand interacts through hydrogen bonding with THR173 and GLU259. The involvement of multiple hydrogen bonds likely contributes to its high binding affinity. Additionally, the hydrophobic interactions with LEU170 and PHE258 further stabilize the complex. In contrast, ligands 4, 5, 6, 8_KA, and 10_KA exhibit weaker binding affinities ranging from &#x2212;4.3 kcal/mol to &#x2212;5.8 kcal/mol. These ligands may have limited interactions with the protein, which could result in weaker binding. Notably, 4_KA has only one hydrophobic interaction with ARG176, which might explain its lower affinity when compared to others. Ligands 1_KA (<xref ref-type="fig" rid="f11">
<bold>Figure&#xa0;11</bold>
</xref>), 2_KA (<xref ref-type="fig" rid="f12">
<bold>Figure&#xa0;12</bold>
</xref>), 7_KA, and 9_KA fall in between, with binding affinities ranging from &#x2212;4.4 kcal/mol to &#x2212;7.4 kcal/mol. However, they exhibit multiple hydrogen bonding interactions, and their hydrophobic and electrostatic interactions appear to be less pronounced, contributing to their moderate binding affinities.</p>
<fig id="f10" position="float">
<label>Figure&#xa0;10</label>
<caption>
<p>3_KA to 1R4U binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g010.tif"/>
</fig>
<fig id="f11" position="float">
<label>Figure&#xa0;11</label>
<caption>
<p>1_KA to 1R4U binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g011.tif"/>
</fig>
<fig id="f12" position="float">
<label>Figure&#xa0;12</label>
<caption>
<p>2_KA to 1R4U binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g012.tif"/>
</fig>
<p>The comparative analysis of the results in <xref ref-type="table" rid="T12">
<bold>Table&#xa0;12</bold>
</xref> provides the binding affinities and interactions of 10 ligands (1_KA to 10_KA) with protein 4HI0. Among the ligands, 3_KA (<xref ref-type="fig" rid="f13">
<bold>Figure&#xa0;13</bold>
</xref>) exhibits the highest binding affinity of &#x2212;8.3 kcal/mol, indicating a strong interaction with the protein. This ligand forms hydrogen bonds with GLY11, LYS14, THR15, ASP37, and VAL10. It also engages in hydrophobic interactions with ALA16, LYS146, and ARG179. Additionally, electrostatic interactions were observed with LYS146 and ARG179. The presence of multiple hydrogen bonds, hydrophobic contacts, and electrostatic interactions likely contributes to the strong binding affinity of 3_KA. Ligand 2_KA (<xref ref-type="fig" rid="f14">
<bold>Figure&#xa0;14</bold>
</xref>) also demonstrates a high binding affinity of &#x2212;8.0 kcal/mol. It engages in hydrogen bonding interactions with ASN145, ARG179, ASP148, GLY13, and LYS146. Hydrophobic interactions are observed with THR15, LEU149, and ALA16. This ligand also exhibits electrostatic interactions with ALA16. These interactions contribute to the favorable binding affinity observed. Ligand 1_KA (<xref ref-type="fig" rid="f15">
<bold>Figure&#xa0;15</bold>
</xref>) shows a binding affinity of &#x2212;7.7 kcal/mol. It forms a hydrogen bond with ASN177 and engages in hydrophobic interactions with LYS146, ARG179, and ALA16. Electrostatic interactions are observed with LYS146. These interactions collectively contribute to the moderate binding affinity of 1_KA. Ligands 9_KA and 7_KA exhibit binding affinities of &#x2212;7.2 and &#x2212;6.5 kcal/mol, respectively. Ligand 9_KA forms hydrogen bonds with GLY11, GLY13, LYS14, THR15, and ASP37 while engaging in a hydrophobic interaction with PHE46. Ligand 7_KA forms a hydrogen bond with THR15 and interacts hydrophobically with LYS146 and ARG179. Ligands 10_KA, 8_KA, 6_KA, 4_KA, and 5_KA demonstrate lower binding affinities, ranging from &#x2212;6.1 kcal/mol to &#x2212;4.2 kcal/mol. These ligands may have fewer or weaker interactions with the protein. Ligand 10_KA forms hydrogen bonds with THR15, ASP43, and ASP145 while engaging in hydrophobic interactions with LYS146 and ARG179. Ligand 8_KA exhibits an interaction with LYS165, while ligand 6_KA forms hydrogen bonds with ILE178, ASN177, and ASP148. Ligands 4_KA and 5_KA show minimal interactions, with only hydrophobic contacts observed.</p>
<fig id="f13" position="float">
<label>Figure&#xa0;13</label>
<caption>
<p>3_KA to 4H10 binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g013.tif"/>
</fig>
<fig id="f14" position="float">
<label>Figure&#xa0;14</label>
<caption>
<p>2_KA to 4H10 binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g014.tif"/>
</fig>
<fig id="f15" position="float">
<label>Figure&#xa0;15</label>
<caption>
<p>1_KA to 4H10 binding modes. Green dashes show H-bond, while other colors show hydrophobic and electrostatic interactions: <bold>(A)</bold> active site pocket, <bold>(B)</bold> amino acid interaction, and <bold>(C)</bold> 2D molecular interactions.</p>
</caption>
<graphic mimetype="image" mime-subtype="tiff" xlink:href="fcimb-13-1253095-g015.tif"/>
</fig>
<p>The comparative analysis of <xref ref-type="table" rid="T11">
<bold>Tables&#xa0;11</bold>
</xref>, <xref ref-type="table" rid="T12">
<bold>12</bold>
</xref> reveals variations in binding affinities and interactions among different ligands with the respective proteins, highlighting the importance of specific molecular interactions in determining ligand&#x2013;protein binding. Ligands in <xref ref-type="table" rid="T12">
<bold>Table&#xa0;12</bold>
</xref> demonstrate a range of binding affinities, with 3_KA and 2_KA exhibiting the highest affinities, emphasizing the significance of hydrogen bonding, hydrophobic contacts, and electrostatic interactions in driving strong ligand&#x2013;protein interactions. The comparative analysis underscores the diverse nature of ligand&#x2013;protein interactions, with ligands showing varying degrees of hydrogen bonding, hydrophobic interactions, and electrostatic interactions, providing insights into the molecular mechanisms underlying ligand binding and potential implications for drug discovery and design.</p>
</sec>
<sec id="s5" sec-type="discussion">
<label>5</label>
<title>Discussion</title>
<p>The optimized CT emulgels were evaluated for <italic>in vitro</italic> antibacterial activity. The disc diffusion method was used for this purpose. The diameter and zone of inhibition (mm) were measured and compared against those of bacterial strains <italic>E. coli</italic> and <italic>S. aureus</italic> as shown in <xref ref-type="table" rid="T10">
<bold>Table&#xa0;10</bold>
</xref> and <xref ref-type="fig" rid="f8">
<bold>Figure&#xa0;8</bold>
</xref>. CT oil and optimized emulgels F8 and F9 show good antibacterial activity against both bacteria as documented in the previously published articles, which show that antibacterial activity in CT oil is due to the presence of its active components, which shows a definite mechanism that contributed to its antibacterial activity (<xref ref-type="bibr" rid="B24">Kh&#xe9;miri et&#xa0;al., 2020</xref>). Hiba S. et&#xa0;al. concluded that <italic>Myrtus communis</italic>, used as an essential oil, correlated to their active constituents. Wazir et&#xa0;al. showed that the results of antibacterial activity were also due to the occurrence of tannins and flavonoids (<xref ref-type="bibr" rid="B16">Ermawati et&#xa0;al., 2020</xref>).</p>
<p>The findings of a one-way ANOVA test revealed a significant value of 0.00, which indicates a probability of less than 0.05 (p 0.05). All of the tested bacteria had a p-value of 0.00, indicating that all the formulations had an antibacterial activity that was statistically significant (<xref ref-type="bibr" rid="B16">Ermawati et&#xa0;al., 2020</xref>).</p>
<p>CT oil showed maximum effectiveness against <italic>E. coli</italic> and <italic>S. aureus</italic>. The MIC and MBC values of pure oil were determined by serial dilution technique, which showed significant results. Similar findings have been reported by previous articles in which Wazir A. et&#xa0;al. documented that different methanolic extracts like <italic>Zanthoxylum armatum</italic>, <italic>Terminalia bellirica</italic>, and <italic>Swertia chirata</italic> show the maximum zone of inhibition against both gram-positive and gram-negative strains (<xref ref-type="bibr" rid="B39">Wazir et&#xa0;al., 2014</xref>).</p>
<p>According to the present research, the zone of inhibition of CT oil was 18&#xa0;mm against <italic>S. aureus</italic> and 20&#xa0;mm against <italic>E. coli</italic>. However, CT emulgel F8 showed a zone of inhibition of 19&#xa0;mm against <italic>S. aureus</italic> and 24&#xa0;mm against <italic>E. coli</italic>, and CT emulgel F9 showed a zone of inhibition of 15&#xa0;mm against <italic>S. aureus</italic> and 22&#xa0;mm against <italic>E. coli</italic>.</p>
<p>The antioxidant activity of optimized CT emulgels was also checked using DPPH free radical scavenging assay. In this assay, the protons were accepted as free radicals from the antioxidant substrate, decreasing its absorbance, which was reserved as an amount of radical scavenging. Therefore, antioxidant activity was measured by DPPH assay as previously reported by <xref ref-type="bibr" rid="B39">Wazir et&#xa0;al. (2014)</xref>.</p>
<p>Sample F8 had % inhibition of 42.131 &#xb1; 0.335 to 72.440 &#xb1; 0.335 at different concentrations. Sample F9 had % inhibition of 26.312 &#xb1; 0.280 to 42.762 &#xb1; 0.398 at concentrations in which both samples F8 and F9 have significant antioxidant potential.</p>
<p>The CT oil was richer in flavonoids and phenolic acids, and antibacterial activity was due to the presence of these components as documented in a previously reported article (<xref ref-type="bibr" rid="B25">Koz&#x142;owska et&#xa0;al., 2022</xref>).</p>
<p>The previously reported articles concluded that the presence of endogenous free radicals causes oxidative damage, which was protected by the presence of flavonoids and phenolic acids (<xref ref-type="bibr" rid="B12">Chandra and Saklani, 2017</xref>; <xref ref-type="bibr" rid="B25">Koz&#x142;owska et&#xa0;al., 2022</xref>). Kozowska M. et&#xa0;al. also reported that the results of antibacterial and antioxidant activities were also correlated with a high amount of phenolic acid (<xref ref-type="bibr" rid="B25">Koz&#x142;owska et&#xa0;al., 2022</xref>).</p>
</sec>
<sec id="s6" sec-type="conclusion">
<label>6</label>
<title>Conclusion</title>
<p>This study successfully developed optimized herbal emulgel formulations (F8 and F9) containing <italic>C. tinctorius</italic> L. oil. These formulations exhibited excellent physicochemical properties. This research provided compelling evidence of these medicinal plants&#x2019; antimicrobial and antioxidant properties without any reported side effects. In addition, the emulgel was effective against <italic>E. coli</italic> and <italic>S. aureus in vitro</italic>, making it a potential treatment for bacterial skin infections. The emulgel was also biocompatible with human skin, which is a good sign of its safety for topical use. This study presents a new, cost-effective topical emulgel formulation containing <italic>C. tinctorius</italic> L. oil as a potential alternative for treating bacterial skin infections. The results cover the methods for additional research to fully understand the mechanisms of action of emulgels in treating bacterial infections.</p>
<p>Furthermore, the study conducted a comparative analysis of molecular docking with antibacterial and antioxidant protein targets. The <italic>in silico</italic> results highlighted the diverse interactions between ligands and proteins, such as hydrogen bonding, hydrophobic interactions, and electrostatic interactions. These findings offer insights into the molecular mechanisms underlying ligand binding, which can have implications for future drug discovery and design. This study will focus on identifying and isolating the pure compounds from the emulgel formulations. This will help determine the individual biological effects of these compounds as antibacterial and antioxidant agents. By doing so, the study aims to contribute to developing new and safer treatment options for bacterial infections and conditions related to oxidative stress. The findings have implications for future drug development and highlight the importance of exploring the therapeutic benefits of medicinal plants in a quest for novel treatments with reduced side effects.</p>
</sec>
<sec id="s7" sec-type="data-availability">
<title>Data availability statement</title>
<p>The raw data supporting the conclusions of this article will be made available by the authors, without undue reservation.</p>
</sec>
<sec id="s8" sec-type="ethics-statement">
<title>Ethics statement</title>
<p>The current research is approved by the ethical committee of the Faculty of Pharmacy, Bahauddin Zakariya University, under 196/PEC/2022. Informed consent was obtained, and ethical guidelines were followed. The approval letter confirms that all necessary precautions were taken to ensure the protection of human subjects and adherence to ethical standards. Notably, all animal experimentations were conducted in accordance with applicable laws, regulations, and guidelines, prioritizing animal welfare and minimizing any potential harm.</p>
</sec>
<sec id="s9" sec-type="author-contributions">
<title>Author contributions</title>
<p>JS and SS conceptualized the study, performed the experiments, and wrote the manuscript. HJ performed review and editing. AsA, AnA, and TZ performed a formal analysis and refined and improved the manuscript. SS supervised, edited, and conceptualized the study. FS supervised the study, performed <italic>in silico</italic> work, and contributed to manuscript refinement and improvement. GW, YJ, H-AN, and MB performed project administration, review and editing, and data validation. All authors contributed to the article and approved the submitted version.</p>
</sec>
</body>
<back>
<ack>
<title>Acknowledgments</title>
<p>The authors would like to extend their sincere appreciation to the Researchers Supporting Project, King Saud University, Riyadh, Saudi Arabia, for funding this work through project number (RSP2023R457).</p>
</ack>
<sec id="s11" sec-type="COI-statement">
<title>Conflict of interest</title>
<p>The authors declare that the research was conducted in the absence of any commercial or financial relationships that could be construed as a potential conflict of interest.</p>
</sec>
<sec id="s12" sec-type="disclaimer">
<title>Publisher&#x2019;s note</title>
<p>All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.</p>
</sec>
<ref-list>
<title>References</title>
<ref id="B1">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Abdipour</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Younessi-Hmazekhanlu</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Ramazani</surname> <given-names>S. H. R.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Artificial neural networks and multiple linear regression as potential methods for modeling seed yield of safflower (Carthamus tinctorius L.)</article-title>. <source>Ind. Crops products</source> <volume>127</volume>, <fpage>185</fpage>&#x2013;<lpage>194</lpage>. doi: <pub-id pub-id-type="doi">10.1016/j.indcrop.2018.10.050</pub-id>
</citation>
</ref>
<ref id="B2">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Afzal</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Shah</surname> <given-names>N. H.</given-names>
</name>
<name>
<surname>Hussain</surname> <given-names>I.</given-names>
</name>
<name>
<surname>Munawar</surname> <given-names>S. H.</given-names>
</name>
<name>
<surname>Mumtaz</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Qureshi</surname> <given-names>N.</given-names>
</name>
</person-group> (<year>2022</year>). <article-title>Preparation of Spilanthes acmella based emulgel: Antimicrobial study and evaluation</article-title>. <source>Pakistan J. Pharm. Sci.</source> <volume>35</volume> (<issue>1</issue>), <fpage>287</fpage>&#x2013;<lpage>295</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.36721/PJPS.2022.35.1.SUP.287-295.1</pub-id>
</citation>
</ref>
<ref id="B3">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Akaike</surname> <given-names>H.</given-names>
</name>
</person-group> (<year>1998</year>). <article-title>A Bayesian analysis of the minimum AIC procedure</article-title>. <source>Selected Papers Hirotugu Akaike</source> <volume>p</volume>, <fpage>275</fpage>&#x2013;<lpage>280</lpage>. doi: <pub-id pub-id-type="doi">10.1007/978-1-4612-1694-0_21</pub-id>
</citation>
</ref>
<ref id="B4">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Alawlaqi</surname> <given-names>M. M.</given-names>
</name>
<name>
<surname>Al-Rajhi</surname> <given-names>A. M.</given-names>
</name>
<name>
<surname>Abdelghany</surname> <given-names>T. M.</given-names>
</name>
<name>
<surname>Ganash</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Moawad</surname> <given-names>H.</given-names>
</name>
</person-group> (<year>2023</year>). <article-title>Evaluation of biomedical applications for linseed extract: antimicrobial, antioxidant, anti-diabetic, and anti-inflammatory activities in vitro</article-title>. <source>J. Funct. Biomater.</source> <volume>14</volume> (<issue>6</issue>), <fpage>300</fpage>.  Available at: <uri xlink:href="https://www.rcsb.org/4HI0">https://www.rcsb.org/4HI0</uri>.</citation>
</ref>
<ref id="B5">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Alexander</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Khichariya</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Gupta</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Patel</surname> <given-names>R. J.</given-names>
</name>
<name>
<surname>Giri</surname> <given-names>T. K.</given-names>
</name>
<name>
<surname>Ripathi</surname> <given-names>D. K.</given-names>
</name>
</person-group> (<year>2013</year>). <article-title>Recent expansions in an emergent novel drug delivery technology: Emulgel</article-title>. <source>J. Controlled Release</source> <volume>171</volume> (<issue>2</issue>), <fpage>122</fpage>&#x2013;<lpage>132</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.1016/j.jconrel.2013.06.030</pub-id>
</citation>
</ref>
<ref id="B6">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ambala</surname> <given-names>R.</given-names>
</name>
<name>
<surname>Vemula</surname> <given-names>S. K.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Formulation and characterization of ketoprofen emulgels</article-title>. <source>J. Appl. Pharm. Sci.</source> <volume>5</volume> (<issue>7</issue>), <fpage>112</fpage>&#x2013;<lpage>117</lpage>. doi: <pub-id pub-id-type="doi">10.7324/JAPS.2015.50717</pub-id>
</citation>
</ref>
<ref id="B7">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ayoub</surname> <given-names>R. K.</given-names>
</name>
<name>
<surname>Murtaza</surname> <given-names>G.</given-names>
</name>
<name>
<surname>Imran</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>S. A.</given-names>
</name>
<name>
<surname>Mir</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>A. K.</given-names>
</name>
<etal/>
</person-group>. (<year>2015</year>). <article-title>Formulation and permeation kinetic studies of flurbiprofen gel</article-title>. <source>Trop. J. Pharm. Res.</source> <volume>14</volume> (<issue>2</issue>), <fpage>195</fpage>&#x2013;<lpage>203</lpage>. doi: <pub-id pub-id-type="doi">10.4314/tjpr.v14i2.2</pub-id>
</citation>
</ref>
<ref id="B8">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Bhanu</surname> <given-names>P. V.</given-names>
</name>
<name>
<surname>Shanmugam</surname> <given-names>V.</given-names>
</name>
<name>
<surname>Lakshmi</surname> <given-names>P.</given-names>
</name>
</person-group> (<year>2011</year>). <article-title>Development and optimization of novel diclofenac emulgel for topical drug delivery</article-title>. <source>Int. J. Comp. Pharm.</source> <volume>2</volume> (<issue>9</issue>), <fpage>1</fpage>&#x2013;<lpage>4</lpage>.</citation>
</ref>
<ref id="B9">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Burki</surname> <given-names>I. K.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>M. K.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>B. K.</given-names>
</name>
<name>
<surname>Uzair</surname> <given-names>B.</given-names>
</name>
<name>
<surname>Braga</surname> <given-names>V. A.</given-names>
</name>
<name>
<surname>Jamil</surname> <given-names>Q. A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Formulation development, characterization, and evaluation of a novel dexibuprofen-capsaicin skin emulgel with improved in vivo anti-inflammatory and analgesic effects</article-title>. <source>AAPS PharmSciTech</source> <volume>21</volume>, <fpage>1</fpage>&#x2013;<lpage>14</lpage>. doi: <pub-id pub-id-type="doi">10.1208/s12249-020-01760-7</pub-id>
</citation>
</ref>
<ref id="B10">
<citation citation-type="book">
<person-group person-group-type="author">
<collab>CambridgeSoft</collab>
</person-group>. (<year>2009</year>). <source>Chem 3D Pro 12.0 (Copyright) 1986 to 2009</source>. (<publisher-loc>Cambridge, MA, USA</publisher-loc>: <publisher-name>CambridgeSoft Corp</publisher-name>.)</citation>
</ref>
<ref id="B11">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chakole</surname> <given-names>C.</given-names>
</name>
<name>
<surname>Shende</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Khadatkar</surname> <given-names>S.</given-names>
</name>
</person-group> (<year>2009</year>). <article-title>Formulation and evaluation of novel combined halobetasol propionate and fusidic acid ointment</article-title>. <source>Int. J. Chem. Tech. Res.</source> <volume>1</volume> (<issue>1</issue>), <fpage>103</fpage>&#x2013;<lpage>116</lpage>.</citation>
</ref>
<ref id="B12">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chandra</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Saklani</surname> <given-names>S.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Phytochemical investigation, anti-oxidant activity and nutraceutical potential of Angelica archangelica</article-title>. <source>EJBPS</source> <volume>4</volume>, <fpage>418</fpage>&#x2013;<lpage>422</lpage>.</citation>
</ref>
<ref id="B13">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Chauhan</surname> <given-names>P.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Formulation and evaluation of anti-bacterial gel containing ethanol extract of thorns of bombax ceiba</article-title>. <source>J. Hunan Univ. (Nat. Sci. Edition)</source> <volume>48</volume> (<issue>10</issue>), <page-range>873&#x2013;880</page-range>.</citation>
</ref>
<ref id="B14">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Devi</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Chaurasia</surname> <given-names>H.</given-names>
</name>
<name>
<surname>Singh</surname> <given-names>R.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Design and characterization of emulgel for the treatment of antifungal infection</article-title>. <source>J. Hunan Univ Nat. Sci.</source> <volume>21</volume>, <fpage>20</fpage>&#x2013;<lpage>37</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.17605/OSF.IO/GJ6HT</pub-id>
</citation>
</ref>
<ref id="B15">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Draw</surname> <given-names>C.</given-names>
</name>
</person-group> (<year>2010</year>). <source>Chemdraw2D (Draw) version Ultra 12.0</source>. <publisher-name>Cambridge soft</publisher-name>.</citation>
</ref>
<ref id="B16">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ermawati</surname> <given-names>D.</given-names>
</name>
<name>
<surname>Nugraheni</surname> <given-names>R. W.</given-names>
</name>
<name>
<surname>Zuardina</surname> <given-names>N.</given-names>
</name>
<name>
<surname>Saputri</surname> <given-names>M. H.</given-names>
</name>
</person-group> (<year>2020</year>). <source>Formulation and Antibacterial Activity Test of Emulgel Containing Citronella Oil (Cymbopogon Nardus L.) with Variaton of Gelling Agent Carbomer</source>. <volume>HSIC 2019</volume>, <fpage>223</fpage>&#x2013;<lpage>227</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.5220/0009130302230227</pub-id>
</citation>
</ref>
<ref id="B17">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Ferreira</surname> <given-names>L. G.</given-names>
</name>
<name>
<surname>Ricardo</surname> <given-names>N.</given-names>
</name>
<name>
<surname>Dos Santos</surname> <given-names>R. N. D.</given-names>
</name>
<name>
<surname>Oliva</surname> <given-names>G.</given-names>
</name>
<name>
<surname>Andricopulo</surname> <given-names>A. D.</given-names>
</name>
</person-group> (<year>2015</year>). <article-title>Molecular docking and structure-based drug design strategies</article-title>. <source>Molecules</source> <volume>20</volume> (<issue>7</issue>), <fpage>13384</fpage>&#x2013;<lpage>13421</lpage>. doi: <pub-id pub-id-type="doi">10.3390/molecules200713384</pub-id>
</citation>
</ref>
<ref id="B18">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Hadgraft</surname> <given-names>J.</given-names>
</name>
<name>
<surname>Lane</surname> <given-names>M. E.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Advanced topical formulations (ATF)</article-title>. <source>Int. J. Pharmaceutics</source> <volume>514</volume> (<issue>1</issue>), <fpage>52</fpage>&#x2013;<lpage>57</lpage>. doi: <pub-id pub-id-type="doi">10.1016/j.ijpharm.2016.05.065</pub-id>
</citation>
</ref>
<ref id="B19">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Jabeen</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Uzair</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Siddique</surname> <given-names>F.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>M. S.</given-names>
</name>
<name>
<surname>Hanif</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Salamatullah</surname> <given-names>A. M.</given-names>
</name>
<etal/>
</person-group>. (<year>2023</year>). <article-title>Exploring the antioxidant and anti-Inflammatory potential of Wilckia maritima: in vitro and in silico investigations</article-title>. <source>Processes</source> <volume>11</volume> (<issue>5</issue>), <fpage>1497</fpage>.  Available at: <uri xlink:href="https://www.rcsb.org/1R4U">https://www.rcsb.org/1R4U</uri>.</citation>
</ref>
<ref id="B20">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Javed</surname> <given-names>H.</given-names>
</name>
<name>
<surname>Shah</surname> <given-names>S. N. H.</given-names>
</name>
<name>
<surname>Ayaz</surname> <given-names>M. M.</given-names>
</name>
<name>
<surname>Javed</surname> <given-names>N.</given-names>
</name>
<name>
<surname>Iqbal</surname> <given-names>F. M.</given-names>
</name>
<name>
<surname>Wahid</surname> <given-names>M.</given-names>
</name>
<etal/>
</person-group>. (<year>2018</year>a). <article-title>Formulation development and characterization of diphenhydramine nasal nanogel</article-title>. <source>AAPS PharmSciTech</source> <volume>75</volume> (<issue>2</issue>), <fpage>491</fpage>&#x2013;<lpage>506</lpage>.</citation>
</ref>
<ref id="B21">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Javed</surname> <given-names>H.</given-names>
</name>
<name>
<surname>Shah</surname> <given-names>S. N. H.</given-names>
</name>
<name>
<surname>Iqbal</surname> <given-names>F. M.</given-names>
</name>
</person-group> (<year>2018</year>b). <article-title>Formulation development and evaluation of diphenhydramine nasal nano-emulgel</article-title>. <source>AAPS pharmscitech</source> <volume>19</volume>, <fpage>1730</fpage>&#x2013;<lpage>1743</lpage>. doi: <pub-id pub-id-type="doi">10.1208/s12249-018-0985-4</pub-id>
</citation>
</ref>
<ref id="B22">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kaur</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Nagpal</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Singh</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Singh</surname> <given-names>G. T.</given-names>
</name>
<name>
<surname>Aggarwal</surname> <given-names>G.</given-names>
</name>
<name>
<surname>Dhingra</surname> <given-names>G. A.</given-names>
</name>
</person-group> (<year>2021</year>). <article-title>Improved anti-bacterial activity of topical gel-based on nanosponge carrier of cinnamon oil</article-title>. <source>BioImpacts: BI</source> <volume>11</volume> (<issue>1</issue>), <fpage>23</fpage>&#x2013;<lpage>31</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.34172/bi.2021.04</pub-id>
</citation>
</ref>
<ref id="B23">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Khan</surname> <given-names>B. A.</given-names>
</name>
<name>
<surname>Ullah</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Khan</surname> <given-names>M. K.</given-names>
</name>
<name>
<surname>Alshahrani</surname> <given-names>S. M.</given-names>
</name>
<name>
<surname>Braga</surname> <given-names>V. A.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Formulation and evaluation of Ocimum basilicum-based emulgel for wound healing using animal model</article-title>. <source>Saudi Pharm. J.</source> <volume>28</volume> (<issue>12</issue>), <fpage>1842</fpage>&#x2013;<lpage>1850</lpage>. doi: <pub-id pub-id-type="doi">10.1016/j.jsps.2020.11.011</pub-id>
</citation>
</ref>
<ref id="B24">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kh&#xe9;miri</surname> <given-names>I.</given-names>
</name>
<name>
<surname>Essghaier</surname> <given-names>B.</given-names>
</name>
<name>
<surname>Sadfi-Zouaoui</surname> <given-names>N.</given-names>
</name>
<name>
<surname>Bitri</surname> <given-names>L.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>Anti-oxidant and antimicrobial potentials of seed oil from Carthamus tinctorius L. in the management of skin injuries</article-title>. <source>Oxid. Med. Cell. Longevity</source> <volume>2020</volume>, <fpage>1</fpage>&#x2013;<lpage>12</lpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.1155/2020/4103418</pub-id>
</citation>
</ref>
<ref id="B25">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Koz&#x142;owska</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Scibisz</surname> <given-names>I.</given-names>
</name>
<name>
<surname>Jaros&#x142;aw</surname> <given-names>L.</given-names>
</name>
<name>
<surname>Laudy</surname> <given-names>A. E.</given-names>
</name>
<name>
<surname>Majewska</surname> <given-names>E.</given-names>
</name>
<name>
<surname>Tarnowska</surname> <given-names>K.</given-names>
</name>
<etal/>
</person-group>. (<year>2022</year>). <article-title>Anti-oxidant and anti-bacterial activity of extracts from selected plant material</article-title>. <source>Appl. Sci.</source> <volume>12</volume> (<issue>19</issue>), <fpage>9871</fpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.3390/app12199871</pub-id>
</citation>
</ref>
<ref id="B26">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Kumar</surname> <given-names>D.</given-names>
</name>
<name>
<surname>Singh</surname> <given-names>J.</given-names>
</name>
<name>
<surname>Antil</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Kumar</surname> <given-names>V.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Emulgel-novel topical drug delivery system-a comprehensive review</article-title>. <source>Int. J. Pharm. Sci. Res.</source> <volume>7</volume> (<issue>12</issue>), <fpage>4733</fpage>&#x2013;<lpage>4742</lpage>.</citation>
</ref>
<ref id="B27">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Mathias</surname> <given-names>N. R.</given-names>
</name>
<name>
<surname>Hussain</surname> <given-names>M. A.</given-names>
</name>
</person-group> (<year>2010</year>). <article-title>Non-invasive systemic drug delivery: developability considerations for alternate routes of administration</article-title>. <source>J. Pharm. Sci.</source> <volume>99</volume> (<issue>1</issue>), <fpage>1</fpage>&#x2013;<lpage>20</lpage>. doi: <pub-id pub-id-type="doi">10.1002/jps.21793</pub-id>
</citation>
</ref>
<ref id="B28">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>M&#xe9;ndez</surname> <given-names>G. L.</given-names>
</name>
<name>
<surname>Fortich</surname> <given-names>M. O.</given-names>
</name>
<name>
<surname>Toro</surname> <given-names>R. O.</given-names>
</name>
<name>
<surname>Castro</surname> <given-names>N. P.</given-names>
</name>
<name>
<surname>Alarc&#xf3;n</surname> <given-names>M. T.</given-names>
</name>
<name>
<surname>Herrera-Barros</surname> <given-names>A.</given-names>
</name>
</person-group> (<year>2018</year>). <article-title>Design of an emulgel-type cosmetic with anti-oxidant activity using active essential oil microcapsules of thyme (Thymus vulgaris L.), Cinnamon (Cinnamomum verum J.), and clove (Eugenia caryophyllata T.)</article-title>. <source>Int. J. Polymer Sci.</source> <volume>2018</volume>, <fpage>1</fpage>&#x2013;<lpage>16</lpage>. doi: <pub-id pub-id-type="doi">10.1155/2018/2874391</pub-id>
</citation>
</ref>
<ref id="B29">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Mohite</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Salunkhe</surname> <given-names>A.</given-names>
</name>
</person-group> (<year>2019</year>). <article-title>Formulation and evaluation of Emulgel containing Coriandrum sativum seeds oil for Anti-inflammatory activity</article-title>. <source>J. Drug Deliv. Ther.</source> <volume>9</volume> (<issue>3-s</issue>), <fpage>124</fpage>&#x2013;<lpage>130</lpage>.</citation>
</ref>
<ref id="B30">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Morris</surname> <given-names>G. M.</given-names>
</name>
<name>
<surname>Huey</surname> <given-names>R.</given-names>
</name>
<name>
<surname>Lindstorm</surname> <given-names>W.</given-names>
</name>
<name>
<surname>Sanner</surname> <given-names>M. F.</given-names>
</name>
<name>
<surname>Belew</surname> <given-names>R. K.</given-names>
</name>
<name>
<surname>Goodsell</surname> <given-names>D. S.</given-names>
</name>
<etal/>
</person-group>. (<year>2009</year>). <article-title>AutoDock4 and AutoDockTools4: Automated docking with selective receptor flexibility</article-title>. <source>J. Comput. Chem.</source> <volume>30</volume> (<issue>16</issue>), <fpage>2785</fpage>&#x2013;<lpage>2791</lpage>. doi: <pub-id pub-id-type="doi">10.1002/jcc.21256</pub-id>
</citation>
</ref>
<ref id="B31">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Mottaleb</surname> <given-names>G. M.</given-names>
</name>
<name>
<surname>Mortada</surname> <given-names>R.</given-names>
</name>
<name>
<surname>Elshamy</surname> <given-names>W.</given-names>
</name>
<name>
<surname>Awad</surname> <given-names>M. F</given-names>
</name>
</person-group>. (<year>2007</year>). <article-title>Preparation and evaluation of fluconazole gels</article-title>. <source>Egyptian J. Biomed. Sci.</source> <volume>23</volume>, <fpage>266</fpage>&#x2013;<lpage>286</lpage>. doi: <pub-id pub-id-type="doi">10.4314/ejbs2.v23i1.40309</pub-id>
</citation>
</ref>
<ref id="B32">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Nisar Hussain Shah</surname> <given-names>S.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Developing an efficacious diclofenac diethylamine transdermal formulation</article-title>. <source>J. Food Drug Anal.</source> <volume>20</volume> (<issue>2</issue>), <page-range>464&#x2013;470</page-range>. doi: <pub-id pub-id-type="doi">10.6227/jfda.2012200205</pub-id>
</citation>
</ref>
<ref id="B33">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Pagano</surname> <given-names>C.</given-names>
</name>
<name>
<surname>Baiocchi</surname> <given-names>C.</given-names>
</name>
<name>
<surname>Beccari</surname> <given-names>T.</given-names>
</name>
<name>
<surname>Blasi</surname> <given-names>F.</given-names>
</name>
<name>
<surname>Cossignani</surname> <given-names>L.</given-names>
</name>
<name>
<surname>Ceccarini</surname> <given-names>M. R.</given-names>
</name>
<etal/>
</person-group>. (<year>2021</year>). <article-title>Emulgel loaded with flaxseed extracts as new therapeutic approach in wound treatment</article-title>. <source>Pharmaceutics</source> <volume>13</volume> (<issue>8</issue>), <fpage>1107</fpage>. doi: <pub-id pub-id-type="doi">10.3390/pharmaceutics13081107</pub-id>
</citation>
</ref>
<ref id="B34">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>RaMalingam</surname> <given-names>N.</given-names>
</name>
<name>
<surname>S., A. P</surname> <given-names>F.</given-names>
</name>
<name>
<surname>Harishma</surname> <given-names>C. M.</given-names>
</name>
<name>
<surname>Jith</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Thahsin, T</surname> <given-names>F.</given-names>
</name>
<name>
<surname>Ganesan</surname> <given-names>B.</given-names>
</name>
<etal/>
</person-group>. (<year>2022</year>). <article-title>Antibiotic emulgel: Design and characterization for topical drug delivery</article-title>. <source>Saudi J. Med. Pharm. Sci.</source> <volume>8</volume> (<issue>8</issue>), <fpage>381</fpage>&#x2013;<lpage>391</lpage>. doi: <pub-id pub-id-type="doi">10.36348/sjmps.2022.v08i08.002</pub-id>
</citation>
</ref>
<ref id="B35">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Sabri</surname> <given-names>H. S.</given-names>
</name>
<name>
<surname>Alia</surname> <given-names>W. K.</given-names>
</name>
<name>
<surname>Abdullahb</surname> <given-names>B. H.</given-names>
</name>
<name>
<surname>Widad</surname> <given-names>M. K.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Formulation design and evaluation of anti-microbial activity of emulgel containing essential oil of Myrtus communis L</article-title>. <source>Inter J. Pharm. Sci. Rev. Res.</source> <volume>40</volume>, <fpage>271</fpage>&#x2013;<lpage>277</lpage>.</citation>
</ref>
<ref id="B36">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Shah</surname> <given-names>S. N. H.</given-names>
</name>
<name>
<surname>Asghar</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Choudhry</surname> <given-names>A. M.</given-names>
</name>
<name>
<surname>Akash</surname> <given-names>M. S. H.</given-names>
</name>
<name>
<surname>Baksh</surname> <given-names>N. N. S.</given-names>
</name>
</person-group> (<year>2009</year>). <article-title>Formulation and evaluation of natural gum-based sustained release matrix tablets of flurbiprofen using response surface methodology</article-title>. <source>Drug Dev. Ind. Pharm.</source> <volume>35</volume> (<issue>12</issue>), <fpage>1470</fpage>&#x2013;<lpage>1478</lpage>. doi: <pub-id pub-id-type="doi">10.3109/03639040903025848</pub-id>
</citation>
</ref>
<ref id="B37">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Singla</surname> <given-names>V.</given-names>
</name>
<name>
<surname>Saini</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Joshi</surname> <given-names>B.</given-names>
</name>
<name>
<surname>Rana</surname> <given-names>A. C.</given-names>
</name>
</person-group> (<year>2012</year>). <article-title>Emulgel: A new platform for topical drug delivery</article-title>. <source>Int. J. Pharma Bio Sci.</source> <volume>3</volume> (<issue>1</issue>), <fpage>485</fpage>&#x2013;<lpage>498</lpage>.</citation>
</ref>
<ref id="B38">
<citation citation-type="book">
<person-group person-group-type="author">
<name>
<surname>Visualizer</surname> <given-names>D.</given-names>
</name>
</person-group> (<year>2005</year>). <source>Accelrys software inc</source> (<publisher-loc>USA</publisher-loc>: <publisher-name>Discovery Studio Visualizer</publisher-name>).</citation>
</ref>
<ref id="B39">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wazir</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Sherwani</surname> <given-names>S. K.</given-names>
</name>
<name>
<surname>Ahmad</surname> <given-names>M.</given-names>
</name>
</person-group> (<year>2014</year>). <article-title>Anti-bacterial, Antifungal and anti-oxidant activities of some medicinal plants</article-title>. <source>Pakistan J. Pharm. Sci.</source> <volume>27</volume> (<issue>6</issue>), <page-range>2145&#x2013;2152</page-range>.</citation>
</ref>
<ref id="B40">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Wulansari</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Jufri</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Budianti</surname> <given-names>A.</given-names>
</name>
</person-group> (<year>2017</year>). <article-title>Studies on the formulation, physical stability, and in vitro anti-bacterial activity of tea tree oil (Melaleuca alternifolia) nanoemulsion gel</article-title>. <source>Int. J. Appl. Pharmaceutics</source> <volume>9</volume>, <fpage>135</fpage>&#x2013;<lpage>139</lpage>. doi: <pub-id pub-id-type="doi">10.22159/ijap.2017.v9s1.73_80</pub-id>
</citation>
</ref>
<ref id="B41">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yadav</surname> <given-names>S. K.</given-names>
</name>
<name>
<surname>Mishra</surname> <given-names>M. K.</given-names>
</name>
<name>
<surname>Tiwari</surname> <given-names>A.</given-names>
</name>
<name>
<surname>Shukla</surname> <given-names>A.</given-names>
</name>
</person-group> (<year>2016</year>). <article-title>Emulgel: a new approach for enhanced topical drug delivery</article-title>. <source>Int. J. Curr. Pharm. Res.</source> <volume>9</volume> (<issue>1</issue>), <fpage>15</fpage>&#x2013;<lpage>19</lpage>. doi: <pub-id pub-id-type="doi">10.22159/ijcpr.2017v9i1.16628</pub-id>
</citation>
</ref>
<ref id="B42">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yesilyurt</surname> <given-names>M. K.</given-names>
</name>
<name>
<surname>Cesur</surname> <given-names>C.</given-names>
</name>
<name>
<surname>Aslan</surname> <given-names>V.</given-names>
</name>
<name>
<surname>Yilbasi</surname> <given-names>Z.</given-names>
</name>
</person-group> (<year>2020</year>). <article-title>The production of biodiesel from safflower (Carthamus tinctorius L.) oil as a potential feedstock and its usage in compression ignition engine: A comprehensive review</article-title>. <source>Renewable Sustain. Energy Rev.</source> <volume>119</volume>, <fpage>109574</fpage>. doi:&#xa0;<pub-id pub-id-type="doi">10.1016/j.rser.2019.109574</pub-id>
</citation>
</ref>
<ref id="B43">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Yusuf</surname> <given-names>D.</given-names>
</name>
<name>
<surname>Davis</surname> <given-names>A. M.</given-names>
</name>
<name>
<surname>Kleywegt</surname> <given-names>G. J.</given-names>
</name>
<name>
<surname>Schmitt</surname> <given-names>S.</given-names>
</name>
</person-group> (<year>2008</year>). <article-title>An alternative method for the evaluation of docking performance: RSR vs RMSD</article-title>. <source>J. Chem. Inf. modeling</source> <volume>48</volume> (<issue>7</issue>), <fpage>1411</fpage>&#x2013;<lpage>1422</lpage>. doi: <pub-id pub-id-type="doi">10.1021/ci800084x</pub-id>
</citation>
</ref>
<ref id="B44">
<citation citation-type="journal">
<person-group person-group-type="author">
<name>
<surname>Zentgraf</surname> <given-names>M.</given-names>
</name>
<name>
<surname>Steuber</surname> <given-names>C.</given-names>
</name>
<name>
<surname>La Motta</surname> <given-names>K.</given-names>
</name>
<name>
<surname>Concettina</surname> <given-names>S.</given-names>
</name>
<name>
<surname>Stefania</surname> <given-names>C.</given-names>
</name>
<name>
<surname>Sotriffer</surname> <given-names>G.</given-names>
</name>
<etal/>
</person-group>. (<year>2007</year>). <article-title>How reliable are current docking approaches for structure-based drug design? Lessons from aldose reductase</article-title>. <source>Angewandte Chemie. Int. Edition</source> <volume>46</volume> (<issue>19</issue>), <fpage>3575</fpage>&#x2013;<lpage>3578</lpage>. doi: <pub-id pub-id-type="doi">10.1002/anie.200603625</pub-id>
</citation>
</ref>
</ref-list>
</back>
</article>