Front. Bioeng. Biotechnol. Frontiers in Bioengineering and Biotechnology Front. Bioeng. Biotechnol. 2296-4185 Frontiers Media S.A. 1747668 10.3389/fbioe.2025.1747668 Correction Correction: Distalization of the mandibular first molar with clear aligners: a 3D finite element study Kang et al. 10.3389/fbioe.2025.1747668 Kang Fujia 1 2 † Data curation Software Methodology Investigation Conceptualization Writing - original draft Formal Analysis Xu Yifei 3 † Investigation Writing - review and editing Zhao Xinyan 1 2 Methodology Investigation Writing - review and editing Supervision Software Lu Zhen 1 2 Supervision Software Investigation Writing - review and editing Methodology Li Dongning 1 2 Writing - review and editing Conceptualization Investigation Zhao Jiamin 1 2 Resources Validation Writing - review and editing Software Li Yibao 4 Data curation Formal Analysis Writing - review and editing Li Menghong 1 2 * Resources Supervision Methodology Writing - review and editing Validation Qi Kun 1 2 * Funding acquisition Project administration Supervision Methodology Writing - review and editing Key Laboratory of Shaanxi Province for Craniofacial Precision Medicine Research, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China Department of Orthodontics, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China Department of Oral Anatomy and Physiology and TMD, School of Stomatology, Air Force Medical University, Xi’an, Shaanxi, China School of Mathematics and Statistics, Xi’an Jiaotong University, Xi’an, Shaanxi, China Correspondence: Kun Qi, 33708980@qq.com; Menghong Li, limenghong@xjtu.edu.cn

These authors have contributed equally to this work

 28 11 2025 2025 13 1747668 16 11 2025 16 11 2025 17 11 2025 Copyright © 2025 Kang, Xu, Zhao, Lu, Li, Zhao, Li, Li and Qi. 2025 Kang, Xu, Zhao, Lu, Li, Zhao, Li, Li and Qi https://creativecommons.org/licenses/by/4.0/ This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms. A Correction on Distalization of the mandibular first molar with clear aligners: a 3D finite element study by Kang F, Xu Y, Zhao X, Lu Z, Li D, Zhao J, Li Y, Li M and Qi K (2025). Front. Bioeng. Biotechnol. 13:1665588. doi: 10.3389/fbioe.2025.1665588 clear aligner tooth movement molar distalization finite element analysis orthodontics section-in-acceptance Biomechanics

Affiliations 1 and 2 were erroneously given as “1Hospital of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China,

2Department of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China.”

Affiliations 1 and 2 have been corrected to “1Key laboratory of Shaanxi Province for Craniofacial Precision Medicine Research, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China.

2Department of Orthodontics, College of Stomatology, Xi’an Jiaotong University, Xi’an, Shaanxi, China”.

The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland