Front. Bioeng. Biotechnol.Frontiers in Bioengineering and BiotechnologyFront. Bioeng. Biotechnol.2296-4185Frontiers Media S.A.164257110.3389/fbioe.2025.1642571Bioengineering and BiotechnologyCorrectionCorrection: Microspheres for 3D bioprinting: a review of fabrication methods and applicationsKaraman et al.10.3389/fbioe.2025.1642571KaramanDmitri123†WilliamsKira14†PhelpsJolene12BoucanFynn La15LewandowskiGretchen4O'GradyKerrin167YuBosco1WillerthStephanie M.12348*1Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada2Division of Medical Sciences, University of Victoria, Victoria, BC, Canada3Axolotl Biosciences, Victoria, BC, Canada4Biomedical Engineering Program, Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada5Biology Program, Department of Science, University of Victoria, Victoria, BC, Canada6Department of Biomedical and Chemical Engineering, Syracuse University, Syracuse, NY, United States7BioInspired Syracuse, Institute for Material and Living Systems, Syracuse University, Syracuse, NY, United States8School of Biomedical Engineering, Faculty of Applied Science and Faculty of Medicine, University of British Columbia, Vancouver, BC, Canada
Approved by:Frontiers Editorial Office, Frontiers Media SA, Switzerland
*Correspondence: Stephanie M. Willerth, willerth@uvic.ca
These authors have contributed equally to this work
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
A Correction on Microspheres for 3D bioprinting: a review of fabrication methods and applications by Karaman D, Williams K, Phelps J, La Boucan F, Lewandowski G, O’Grady K, Yu B and Willerth SM (2025). Front. Bioeng. Biotechnol. 13:1551199. doi: 10.3389/fbioe.2025.1551199microspheresbioprintingbiomaterialsemulsificationmicrofluidicselectrospraydrug encapsulationsection-at-acceptanceBiomaterials
Author Jolene Phelps was erroneously assigned to affiliation 3 (Axolotl Biosciences, Victoria, BC, Canada) instead of affiliation 1 (Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada). Authors Fynn La Boucan, Kerrin O’Grady, and Bosco Yu were erroneously assigned to affiliation 2 (Division of Medical Sciences, University of Victoria, Victoria, BC, Canada) instead of affiliation 1. Author Gretchen Lewandowski was erroneously assigned to affiliation 1 instead of affiliation 4 (Biomedical Engineering Program, Department of Mechanical Engineering, University of Victoria, Victoria, BC, Canada). The correct affiliations have now been added for these authors.
The original version of this article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.