Front. Bioeng. Biotechnol.Frontiers in Bioengineering and BiotechnologyFront. Bioeng. Biotechnol.2296-4185Frontiers Media S.A.159701410.3389/fbioe.2025.1597014Bioengineering and BiotechnologyCorrectionCorrigendum: Hybrid films loaded with 5-fluorouracil and Reglan for synergistic treatment of colon cancer via asynchronous dual-drug deliveryMao et al.10.3389/fbioe.2025.1597014MaoHairong1ZhouJianfeng2YanLiang3ZhangShuping2*YuDeng-Guang2*1College of Chemistry and Chemical Engineering, Zhengzhou Normal University, Zhengzhou, Henan, China2School of Materials and Chemistry, University of Shanghai for Science and Technology, Shanghai, China3School of Optical-Electrical and Computer Engineering, University of Shanghai for Science and Technology, Shanghai, China
Edited and reviewed by:Huihua Yuan, Nantong University, China
This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.
A Corrigendum on Hybrid films loaded with 5-fluorouracil and Reglan for synergistic treatment of colon cancer via asynchronous dual-drug delivery by Mao H, Zhou J, Yan L, Zhang S and Yu D-G (2024). Front. Bioeng. Biotechnol. 12:1398730. doi: 10.3389/fbioe.2024.1398730synergistic therapyhybrid filmscolon cancerasynchronous dual-drug deliverycoaxial electrosprayingcastingtumor-targeted therapysection-at-acceptanceBiomaterials
In the published article, there was an error in Figure 6 as published. The highly similarity of XRD patterns of S2, S3 and CA may mislead the readers. Thus, all the three samples were re- prepared and all the raw polymers and samples were re-tested. The corrected Figure 6 and its caption “FIGURE 6 X-ray diffraction (XRD) patterns of the four starting components (Reglan, 5-FU, PVP, and CA) and their homogeneous composite S2, heterogeneous composite S3, and hybrid casting film S4.” appear below.
X-ray diffraction (XRD) patterns of the four starting components (Reglan, 5-FU, PVP, and CA) and their homogeneous composite S2, heterogeneous composite S3, and hybrid casting film S4.
X-ray diffraction patterns for various materials are shown. On the left, patterns for PVP, CA, S2, S3, S4, 5-Fu, and Reglan are displayed. The right panel highlights S4, S3, S2, CA, and PVP, with intensity on the vertical axis plotted against 2 Theta degrees on the horizontal axis. Peaks vary in intensity, indicating different crystalline structures.
The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.
Publisher’s note
All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.