Front. Bioeng. Biotechnol. Frontiers in Bioengineering and Biotechnology Front. Bioeng. Biotechnol. 2296-4185 Frontiers Media S.A. 1470482 10.3389/fbioe.2024.1470482 Bioengineering and Biotechnology Correction Corrigendum: Tribological properties of MAO ceramic coatings with annulus array texture on disposable surgical gloves Ji et al. 10.3389/fbioe.2024.1470482 Ji Jing 1 Bai Zhenbo 1 Wang Jinfeng 1 Yang Huiyun 2 Lu Hailin 2 Fang Jing 1 * 1 Department of Gynecology and Obstetrics, The First Affiliated Hospital of Xi’an Jiaotong University, Xi’an, Shaanxi, China 2 Group of Mechanical and Biomedical Engineering, College of Mechanical and Electronic Engineering, Xi’an Polytechnic University, Xi’an, Shaanxi, China

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland

 *Correspondence: Jing Fang, fangjing88993@126.com 05 09 2024 2024 12 1470482 25 07 2024 23 08 2024 Copyright © 2024 Ji, Bai, Wang, Yang, Lu and Fang. 2024 Ji, Bai, Wang, Yang, Lu and Fang

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

 A Corrigendum on Tribological properties of MAO ceramic coatings with annulus array texture on disposable surgical glove by Ji J, Bai Z, Wang J, Yang H, Lu H and Fang J (2024). Front. Bioeng. Biotechnol. 12:1397050. doi: 10.3389/fbioe.2024.1397050 annulus array texture micro-arc oxidation coefficient of friction disposable surgical gloves biomaterials section-at-acceptance Biomaterials

In the published article, the Reference for Vencl et al., 2019 was incorrectly written as “Vencl, A., et al. (2019). “SURFACE TEXTURING FOR TRIBOLOGICAL APPLICATIONS,” in A REVIEW SERBIATRIB ‘19 16th International Conference on Tribology in Industry, USA, 17–19 May 2023 (IEEE), 15–17.” It should be “Vencl, A., Ivanović, L., Stojanović, B., Zadorozhnaya, E., Miladinović, S., Svoboda, P. SURFACE TEXTURING FOR TRIBOLOGICAL APPLICATIONS: A REVIEW, Proceedings on Engineering Sciences, 2019, 1(1), pp. 227–239. DOI: 10.24874/PES01.01.029.”

In the published article, the Reference for Wang et al., 2023 was incorrectly written as “Wang, J., et al. (2023). Corrosion resistance and biodegradability of micro-arc oxidation coatings with the variable sodium fluoride concentration on ZM21 magnesium alloys. J. Alloys Compd., 962. doi: 10.1016/j.jallcom.2023.171172.” It should be “Wang, J., Dou, J., Wang, Z., Hu, C., Liu, J., Yu, H., Chen, C. (2023). Corrosion resistance and biodegradability of micro-arc oxidation coatings with the variable sodium fluoride concentration on ZM21 magnesium alloys. J. Alloys Compd., 962. doi: 10.1016/j.jallcom.2023.171172.”

In the published article, the Reference for Jia et al., 2024 was incorrectly written as “Jia, E., et al. (2024). Study on the negative effects of low sodium hexametaphosphate concentration on MAO coating. Mater. Chem. Phys., 311. doi: 10.1016/j.matchemphys.2023.128552.” It should be “Jia, E., Wang, J., Liu, Q., Xu, G., Lu, H., Peng, Z. (2024). Study on the negative effects of low sodium hexametaphosphate concentration on MAO coating. Mater. Chem. Phys., 311. doi: 10.1016/j.matchemphys.2023.128552.”

The authors apologize for these errors and state that this does not change the scientific conclusions of the article in any way. The original article has been updated.

Publisher’s note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.