Front. Bioeng. Biotechnol. Frontiers in Bioengineering and Biotechnology Front. Bioeng. Biotechnol. 2296-4185 Frontiers Media S.A. 883601 10.3389/fbioe.2022.883601 Bioengineering and Biotechnology Erratum Erratum: Enhanced Mechanical Properties of Polyvinyl Chloride-Based Wood–Plastic Composites With Pretreated Corn Stalk Frontiers Production Office Erratum: Corn Stork Pretreatment for WPCs Frontiers Production Office * Frontiers Media SA, Lausanne, Switzerland

Approved by: Frontiers Editorial Office, Frontiers Media SA, Switzerland

 *Correspondence: Frontiers Production Office, production.office@frontiersin.org

This article was submitted to Bioprocess Engineering, a section of the journal Frontiers in Bioengineering and Biotechnology

 07 04 2022 2022 10 883601 25 02 2022 25 02 2022 Copyright © 2022 . 2022

This is an open-access article distributed under the terms of the Creative Commons Attribution License (CC BY). The use, distribution or reproduction in other forums is permitted, provided the original author(s) and the copyright owner(s) are credited and that the original publication in this journal is cited, in accordance with accepted academic practice. No use, distribution or reproduction is permitted which does not comply with these terms.

 An Erratum on Enhanced Mechanical Properties of Polyvinyl Chloride-Based Wood–Plastic Composites With Pretreated Corn Stalk by Shen, T., Li, M., Zhang, B., Zhong, L., Lin, X., Yang, P., Li, M., Zhuang, W., Zhu, C., and Ying, H. (2022). Front. Bioeng. Biotechnol. 9:829821. doi:10.3389/fbioe.2021.829821 wood-plastic composites polyvinyl Chloride lignocellulose pretreatment mechanical properties

Due to a production error, the funding section was erroneously omitted. The correct funding section appears below

“The authors are grateful for the financial support of the National Key Research and Development Program of China (grant no. 2019YFD1101202), Jiangsu Province Natural Science Foundation for Young Scholars (grant no. SBK2021040275), Natural Science Foundation for Distinguished Young Scholars (grant no. SBK20190035), Program of National Natural Science Foundation of China (grant nos. 22178170, 21878142, 22008119, and 21908100), Key Research and Development Plan of Jiangsu Province (grant nos. BE2020712 and BE2019001), Six Talent Peaks Project in Jiangsu Province (SWYY-045), and High-Level Innovation and Entrepreneurship Talents Introduction Program of Jiangsu Province. We would like to thank all the authors and the National Key Research and Development Program of China, Jiangsu Province Natural Science Foundation for Young Scholars, Natural Science Foundation for Distinguished Young Scholars, Program of National Natural Science Foundation of China, Key Research and Development Plan of Jiangsu Province, and High-Level Innovation and Entrepreneurship Talents Introduction Program of Jiangsu Province.”

The publisher apologizes for this mistake. The original version of this article has been updated.

Publisher’s Note

All claims expressed in this article are solely those of the authors and do not necessarily represent those of their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.